Miller Big Blue 300 PRO Series- User Manual
Miller Big Blue 300 PRO Series– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Engine Specifications
- Page 3 – Function Guide; ARC START; ARC END; International Model Receptacles
- Page 4 – Superior Circuit Board Design; What Makes Miller
- Page 5 – Genuine Miller
- Page 6 – Trailers and Hitches; Trailer Specifications; Remote Controls
- Page 7 – Typical Installations
- Page 8 – Ordering Information
Standard features include:
digital preset weld meters,
output contactor control, automatic idle and 120 V block heater.
Processes
Stick (SMAW)
Flux-Cored (FCAW)
MIG (GMAW)
DC TIG (GTAW)
Air Carbon Arc (CAC-A)
Rated: 1/4-inch (6.4 mm) carbons
Heavy Industrial
Applications
Pipe Welding
Mechanical Contractor
Issued July 2013 • Index No. ED/5.4
LINE-X
®
cover
is workbench tough and
provides superior impact, corrosion
and abrasion protection.
Infinite arc control
allows the arc
characteristics to be changed for
specific applications in Stick and MIG.
Superior arc performance
• Adjustable arc control
• Hot Start
™
(Stick)
• FCAW/MIG arc performance
• Lift-Arc
™
TIG with Auto-Stop
™
Auto Remote Sense
™
(ARS)
detects if
a remote control is plugged into the
14-pin receptacle and eliminates
confusion of a remote/panel switch.
Welder/generator is warranted by Miller for 3 years, parts and labor.
Engine is warranted separately by engine manufacturer.
Output Range
DC Stick
20 – 400 A
FCAW/MIG
14 – 40 V
DC TIG
20 – 400 A
Generator Output Rated at 104° F (40° C)
12,000 watts peak, 10,000 watts continuous
Accu-Rated
™
– Not Inflated
Generator Power
The professional welder’s choice —
designed exclusively for transmission
pipeline work, the Big Blue 350
PipePro offers Stick as well as
MIG/FCAW welding capabilities to
meet high-strength steel requirements
and is ideal for the most demanding
pipeline jobs.
The Vault — ultimate control
board reliability.
See page 4.
Mitsubishi S4L2 four-cylinder diesel.
Heavy-duty low-speed industrial
engines
are designed to operate
over 10,000 hours before the first
basic overhaul. Backed by worldwide
support and service.
Engine coolant temperature gauge
and meter maintenance displays
• Fuel gauge
• Hour meter function
• Oil change interval
• High coolant temperature and low
oil pressure shutdowns
• Low fuel shutdown — engine
shuts down before system runs
out of fuel, making restarts easy.
Easy to use.
Simple controls make
it easy to setup and weld!
Low OCV Stick
reduces the open-
circuit voltage to 15 volts when the
welding power source is not in use,
increasing operator safety without
compromising arc starts.
Optional Stainless Steel
Appearance Package
provides
additional exterior protection to
withstand corrosive environments.
EPA Tier 4i
Compliant
EPA Tier 4i
Compliant
EPA Tier 4i
Compliant
EPA Tier 4i
Compliant
Big Blue 350 PipePro engine drive shown with
recommended SuitCase
®
X-TREME
™
8HD
wire feeder (see page 5 for more information).
Caterpillar C1.5T
three-cylinder diesel.
Miller Electric Mfg. Co.
An ITW Company
1635 West Spencer Street
P.O. Box 1079
Appleton, WI 54912-1079 USA
MillerWelds.com
Equipment Sales US and Canada
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
Big Blue
®
350 PipePro
®
Diesel Engine-Driven
Welder/AC Generator
Quick
Specs
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Performance Data 2 Specifications (Subject to change without notice.) SIMULTANEOUS WELDING AND POWER 3503002251751257525 WeldAmperes Total PowerAvailable (Watts) 120 V 240 V 1,0004,5007,5009,00010,00010,00010,000 8.337.562.57583.383.383.3 4.218.831.337.541.641.641.6 STICK MODE V/A CURVE — MIN/MAX DI...
3 Function Guide 1. Self-Calibrating Digital Weld Meters with Fault Code Indication display preset or actual weld parameters. 2. Adjustable Arc Control adjusts DIG when process control is in Stick mode and adjustsinductance when process control is inFCAW or MIG mode. The amount of DIGdetermines how ...
4 Rigorous Testing forTough, Real-WorldConditions To prove our machines go to thelimit, Miller industrial engine drivesare put to the test in very extremeenvironmental conditions. • Airborne dust and sand. Critical components are exposed toabusive airborne particles in aspecial testing chamber for w...
