Miele T1323C - Manual

a e- "PROGRAMS" buttons For selecting a drying program. b "OPTIONS" buttons For selecting a drying option. c "DRYNESS" button For selecting the dryness level offinished laundry. d "STATUS" display Shows the current cycle of the dryingprogram. e "Buzzer" button...

The dryer must be correctly installedand connected before the first use.Please refer to the "InstallationInstructions". ^ Before using for the first time cleanthe drum with a cloth. Before drying, check fabric carelabels for special drying instructions. q Dry with normal temperature r Dry wi...

1. Turn on the dryer and loadthe laundry ^ Press the "On/Off" button to turn onthe dryer. ^ Press the "Door" button to open thedoor. ^ Load the laundry loosely into thedrum. ^ Make sure the lint filters are in place. ^ Close the door with a firm swing - donot push it shut. For best r...

Program Fabric Note Normal Available drying options: Turbo, Gentle, Anti-crease Extra Dry Multi-layer fabrics, mixed loads ofsturdy cottons, e.g. jeans, towels. The "Extra dry" program should not beselected for jersey materials. Items may shrink. More Dry Uniform loads of cotton, e.g. sheets...

4. Select the dryness level The dryness level can be selected inthe "Normal" and "Wrinkle-free"programs. (The dryness level of theother programs cannot be adjusted.) ^ Press the selection button until thedesired indicator illuminates. In the "Wrinkle-free" program, only"M...

6. Start the program ^ Press the "Start/Stop" button. Once the program starts, the currentcycle of the program will be indicatedin the "STATUS" display. 7. At the end of a program The "Anti-crease/End" indicator will lightat the end of a program and the buzzerwill sound if it...

Child lock When activated, the child lock preventsthe dryer from being operated bylocking the control panel functions. The dryer can be turned on but notstarted. The "Child lock" indicator willflash. The door can be opened. To activate the child lock 1. Make sure the dryer is turned off and ...

Cleaning the lint filter The lint filter must be cleaned afterevery program. ^ Open the door and remove the lintfilter by gently lifting it upwards. ^ Wipe the lint off the filter with yourhand (do not use any sharp objects!) ^ Remove the lint from the door framelint filter with your fingers. ^ Any ...

Cleaning the exterior and thecontrol panel , To reduce the risk of electric shock, disconnect the dryer from thepower supply by shutting off thepower main, tripping the circuitbreaker or unplugging the powercord before performingmaintenance.Never use abrasive cleaners,scouring pads, steel wool or ca...

Quick Guide Remove this guide for easy reference Please read allinstructions, especiallythe "Important Safety Instructions", before using the dryer.

Cleaning the condenser , To reduce the risk of electric shock, disconnect the dryer from thepower supply by shutting off thepower main, tripping the circuitbreaker or unplugging the powercord before performingmaintenance. ^ Clean the condenser every 6 months. Removing the condenser The access panel ...

Changing the light bulb , To reduce the risk of electric shock, disconnect the dryer from thepower supply by shutting off thepower main, tripping the circuitbreaker or unplugging the powercord before performingmaintenance. ^ Open the door. The bulb cover is located along theupper rim of the drum ope...

What if the dryer will not run? Possible fault Fix The "Start/Stop" button was notpressed. Make sure the dryer is on. Press the"Start/ Stop" button to begin the dryingprogram. The circuit breaker tripped or the dryeris unplugged. Make sure the dryer is plugged in orreset the circuit ...

In the event of a fault you cannot fixyourself, please contact the MieleTechnical Service Department U [email protected] V [email protected] When contacting Technical Service,please quote the model and serialnumber of your appliance. They can befound on the data plate ...

Disposal of the packingmaterials The cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable. To prevent suffocation of children,ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of ...

The tumble dryer can also be placedon top of a Miele washing machine for astacked installation. An appropriatestacking kit is required. The stacking kitis available from your Miele dealer orthe Miele Technical ServiceDepartment. , Installation of the stacking kit must be performed by a Mieleauthoriz...

GROUNDING INSTRUCTIONSThis appliance must be grounded.In the event of malfunction orbreakdown, grounding will reducethe risk of electric shock byproviding a path of least resistancefor electric current. This appliance isequipped with a cord having anequipment grounding conductor anda grounding plug....

Front view a Power cord with plug b Condensed water container c Control panel d Door e Access panel to condenser f Four height adjustable feet g Optional drain hose: An alternative to using thecondensed water container is todrain condensed water into a sink,standpipe or gully. Installation 28

Installation tips An airflow gap of 3 / 8 " (10 mm) must be provided between the machineand the floor. This airflow gap mustnot be blocked by a toekick or thickpiled carpets. Do not install the dryer next to arefrigerator. The warm air exhaustingfrom the dryer can affect thethermostat of the ref...

External water drain When drying is in progress, condensedwater is pumped into the condensedwater container through the drain hoseat the back of the dryer. Thecondensed water can also be draineddirectly if the machine is installed neara sink or a stand pipe so that thecondensed water container does ...

If the external drain is no longer used , Do not push the drain hose back into the dryer. It could becomekinked and damage the dryer. ^ Loop the drain hose up. ^ Use a suitable cable tie to secure thelooped hose to the back of the dryeror store the looped hoses behind thedryer. ^ Insert the drain ho...