Miele T 8626 WP - Manual

Technical safety ~ Before setting up the tumble dryer, check it for any externally visibledamage.Do not install or use a damaged tumbledryer. ~ Before connecting the tumble dryer, ensure that the connection data on thedata plate (voltage and connectedload) match the mains electricitysupply. If in an...

Correct use ~ To prevent the risk of fire, the following textiles must not be dried inthis tumble dryer: – items which have not been washed. – items, such as workwear, which have not been thoroughly cleaned andwhich are still soiled with grease, oilor other deposits (such ascosmetics, lotions etc).I...

~ The tumble dryer must not be used: – without the fluff filters in place or if the fluff filters are damaged in anyway. – without the fine filters in place or if the fine filters are damaged in anyway. This would cause an excessivebuild-up of fluff which in turn wouldcause a fault. ~ After every cy...

Control panel a Start/Stop button For starting a programme andcancelling a programme once it hasstarted.The indicator light flashes while aprogramme is being selected andthen lights up constantly after it hasstarted. b Display with Menu buttons See the next page for moreinformation. c m button For s...

Display The display is used for the following: Selecting and displaying settings – Selecting different drying levels (e.g. Hand iron, Normal ... ) or the duration of the Warm air and Cool air programmes – Selecting delay start – Displaying the drying duration (Estimated time remaining) Note All the ...

Menu buttons Various settings are made via the Menu buttons. They are used to alter or confirm thevalue displayed above the vertical line. To alter a setting: Cottons Duration: 2:21 h ^ ^ ^ ^ ^ ^ Extra dry Pressing the right or left hand Menu button selects the drying level. To confirm a setting: Fu...

, If the tumble dryer has not been transported as described in"Installation" then it must be left tostand for at least 1 hour before it isconnected to the electricity supply. When the tumble dryer is switched onfor the first time, the welcome screenwill appear. The welcome screen will appear...

Garment care label symbols Drying q / r Normal/low temperature. Drying is carried out at a lowtemperature in everyprogramme, so you do not needto sort your garments accordingto whether they have the q or r symbol. s Do not tumble dry. Ironing I Very hot. H Hot. G Warm. J Do not iron. Tips on drying ...

Brief instructions The headings numbered ( A , B , C ...) show the operating sequence and canbe used as a brief guide to using yourdryer. A Sort the laundry To ensure an even drying resultseparate out the washed laundry andsort it according to:. . . the drying level required. . . the type of fibre o...

Each press of the Freshen up / Gentle tumble button selects the extra option (the appropriate indicator light willcome on) and deselects the previousoption or no option is selected. It is notpossible to select the Freshen up and Gentle tumble options at the same time. Not all of the extra options ar...

With delay start you can choose whenyou want the programme to end. Thestart of a programme can be delayedfrom 30 minutes up to a maximum of 24hours, To select delay start A Select the programme you want andthen press the m button. The indicator light for the m button will light up. Delay start 10:00...

Cottons Max. load 6 kg* Extra dry, Normal+, Normal** Fabric type Single and multi-layered cotton fabrics such as towelling,jerseywear, T-shirts, underwear. Notes – Select Extra dry for multi-layered and very thick fabrics. – Do not use Extra dry for jersey fabrics (e.g. T-shirts, underwear, baby clo...

Delicates Max. load 2.5 kg* Normal+, Normal, Hand iron r , Hand iron rr Fabric type Delicate items made of cotton, synthetic or blended fabrics, e.g.:jumpers, skirts, trousers, table cloths, shirts, blouses and eveningwear with sequins and beading. Note Laundry remains relatively crease-free for eas...

Cool air Max. load 6 kg* Fabric type Any item which only needs airing. Extra options Anti-crease, Buzzer Automatic+ Max. load 4.5 kg* Normal+, Normal, Hand iron r Fabric type Mixed loads of garments suitable for the Cottons and Minimum iron programmes. Sort according to colour. Extra options Anti-cr...

Once a programme has started - changing the programme You cannot change to anotherprogramme once a programme hasstarted (this prevents unintentionalalterations).If an attempt is made to change aselection: Option not possible will appear in the display. It is still possible to select or deselectthe A...

Emptying the condensed watercontainer The condensed water will be collectedin the condensed water containerunless the appliance has been set upto drain via the drain hose (seeinstallation). Empty the condensed watercontainer after every dryingprogramme. The drying programme will beinterrupted if the...

This tumble dryer has a multi-stagefilter system, consisting of fluff filters and additional fine filters in the doorand the door opening . There is also a fine filter in front of the heat exchangerfor added protection. Make sure you clean all thefilters at the correct intervals The filters are loca...

Cleaning the surfaces of thefluff filters Hair and fluff on garments are collectedby the fluff filters in the door and thedoor opening.Tip: You can use a vacuum cleaner toremove the fluff. Clean the surfaces of the fluff filtersin the door and the door openingafter each drying programme. 1. In the d...

Cleaning the fine filters The additional fine filters collect finerfluff, hair and detergent residues whichhave got through the surfaces of thefluff filters in the door and the dooropening. The additional fine filters – do not need to be cleaned after each drying programme. Theyshould only be cleane...

Replacing ^ Insert the fine filter on the handle. ^ Press the stoppers into the openingsof the handle (until you feel themclick into position). ^ Push the fine filter back into theopening in front of the heatexchanger unit. When replacing the inner cover,ensure that the rubber seal fitscorrectly int...

With the help of the following notes, minor faults in the performance of theappliance, some of which may result from incorrect operation, can be put rightwithout contacting the Service Department. , Repair work to electrical appliances should only be carried out by a suitably qualified person in str...

An unsatisfactory drying result Problem Possible cause Remedy The laundry is notsufficiently dry. The load consisted ofdifferent fabrics. – Finish drying using the Warm air programme. – Select a different programme next time*. Feather filled pillowssmell after drying. Feathers are a naturalproduct a...

Other problems Problem Possible cause Remedy The dryingprocess goes ontoo long or evenswitches off. Please check all the possible causes and switch the dryeroff and then back on again. Ventilation to and from thedryer may be insufficient (e.gbecause it is installed in asmall room). This has causedth...

Problem Possible cause Remedy There are hummingnoises. The compressor isoperating. These noises are quitenormal and do not indicate afault. The display is dark.The programmeselector is not lit up.The Start/Stop buttonlight flashes slowly. The display hasswitched offautomatically to saveenergy (Stand...

Changing the lamp Disconnect the tumble dryer fromthe mains electricity supply. ^ Open the door. You will find the interior lamp cover atthe top of the drum aperture. ^ Insert a suitable tool, such as a widebladed screwdriver, under the sideedge of the lamp cover as illustrated. ^ Apply a little pre...

Repairs In the event of any faults which youcannot remedy yourself, please contact – your Miele dealer or – the Miele Service Department (see back cover for contact details). When contacting your dealer or theService Department, please quote themodel and serial number of yourappliance, both of which...

Front view a Mains connection cable b Control panel c Condensed water container d Door e Service panel for heat exchangerunit (for cleaning or replacing thefine filter) f Four height adjustable screw feet g Cool air intake panel h External drainage of condensedwater hose(see "External condensed ...

Before moving the tumble dryeragain (e.g. when moving house) After each use a small quantity ofcondensed water will collect in the areaaround the pump. This water can runout if the tumble dryer is tipped upwhen it is being moved. It is a goodidea to run the Cool air programme for approximately 1 min...

External condensed wateroutlet General notes When drying is in progress, condensedwater is pumped into the condensedwater container through the drain hose atthe back of the dryer. The condensedwater can also be drained off directly ifthe tumble dryer is installed near a sink,drain outlet etc. so tha...

Electrical connection U.K. All electrical work should be carried outby a suitably qualified and competentperson, in strict accordance withcurrent national and local safetyregulations (BS 7671 in the UK). Ensure power is not supplied to theappliance until after installation workhas been carried out. ...

Load 1) Final spin speed in a domestic washing machine Residual moisture Energy Duration kg rpm % kWh Minutes Cottons Normal 2 6.0 1000 60 1.80 104 Cottons Normal+ Freshen up+ Gentle tumble 6.06.0 10001000 6060 0.951.80 56 110 Cottons Normal 6.06.06.06.0 1200140016001800 53504843 1.651.551.501.35 95...

Height 850 mm Width 595 mm Depth 596 mm Depth with door open 1060 mm Height for building under 820 mm Width for building under 600 mm Depth for building under 600 mm Suitable for pushing under a worktop Yes Suitable for stacking Yes Weight 69 kg Drum volume 111 l Maximum capacity 6 kg dry weight Cap...

Settings menu J for changingdefault settings The Settings menu is used to alter thedryer's electronics to suit differentrequirements.Settings can be altered at any time. 52

To open the Settings menu ^ Close the door. ^ Switch the dryer on. ^ Press both menu buttons at the sametime until the following appears in thedisplay: Settings Language F Continue OK You are now in the Settings menu. Select the setting you want with the lefthand Menu button under Continue , and con...

Time First select either a 24 hour or 12hour clock. You can then set thecurrent time of day. To set the clock format Clock format 24 h clock B Continue OK ^ Select the clock format you want withthe left hand Menu button under Continue , and confirm your selection with the right hand Menu button unde...