Page 2 - Contents
Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Bottle presenter . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 4 - Description of the appliance; Upper and middle temperature zone controls
a Alarm off button for upper zone b Temperature display for upper zone c Temperature selector buttons forupper zone(+ for warmer; – for colder) d Constant humidity (Dynamic cooling)button with indicator light forupper and middle zones e Safety lock indicator light for upperand middle zones a Safety ...
Page 6 - Optional accessories; Bottle presenter
Optional accessories Bottle presenter This bottle presenter is available fromthe Miele Spare Parts Department oryour dealer. Description of the appliance 6
Page 7 - Disposal of your old appliance; Caring for the environment
Disposal of the packingmaterial The transport and protective packinghas been selected from materials whichare environmentally friendly fordisposal, and can normally berecycled. Ensure that any plastic wrappings,bags etc. are disposed of safely andkept out of the reach of babies andyoung children. Da...
Page 8 - Correct application; Safety with children; Warning and Safety instructions
This appliance complies with allrelevant local and national safetyrequirements. Improper use can,however, present a risk of bothpersonal injury and materialdamage. To avoid the risk of accidents anddamage to the appliance, pleaseread these instructions carefullybefore using it for the first time. Th...
Page 9 - Technical safety
Technical safety ~ Before setting up the appliance, check it for any externally visibledamage.Do not install and use a damagedappliance. ~ This appliance contains the coolant Isobutane (R600a), a natural gas whichis environmentally friendly. Care mustbe taken during transportation andsetting up of t...
Page 10 - Correct use
~ Installation work, maintenance and repairs may only be carried out bysuitably qualified and competentpersons in accordance with nationaland local safety regulations.Repairs and other work by unqualifiedpersons could be dangerous and themanufacturer will not be held liable.Ensure current is not sup...
Page 12 - Switching on and off
Before using for the first time The stainless steel surfaces have alayer of protective foil to preventscratching during transportation. ^ Do not remove this foil until theappliance has been installed or builtin. Start at one of the upper corners. ^ After removing the protective foil,treat stainless ...
Page 14 - Temperature; Safety features; The optimum temperature and humidity
Wine keeps on maturing depending onthe surrounding conditions. The lengthof time for which wine can be kept ingood condition will therefore dependnot only on the temperature but also onthe air quality. The wine conditioning unit, with itsconstant ideal temperature, increasedair humidity and odour fr...
Page 15 - Temperature displays
Setting the temperature The temperature can be set in all threezones separately. To do this, press the buttons under therespective temperature displays: Press the + button : to raise the temperature– button: to reduce the temperature. The temperature being set will flash inthe display. When pressing...
Page 16 - Temperature display brightness; Humidity level; Useful tip
Temperature display brightness The appliance is supplied with thebrightness of the temperature displaysset as low as possible. You can adjust the brightness of thetemperature displays (the temperaturedisplays for the upper and middlezones are adjusted together): ^ Press and hold the constant humidit...
Page 18 - Interior lighting
The interior lighting can be switched onto display your wine to its best effectwhen the door is shut.Each temperature zone has its ownlight, so that all three zones are lit up. The use of LED lighting avoids anydamage to the wine due to heat or UVlight. Switching on the interior lighting ^ Press the...
Page 19 - Storing wine bottles
Any vibration or movement of the bottlecan affect the wine by interrupting thenatural respiration process and soimpair the taste. As far as possible, store bottles of thesame type of wine beside each otheron the same shelf. Removing a bottle ofone type will then leave the other typesundisturbed and ...
Page 20 - Alarm
Your appliance is fitted with a warningsystem which ensures that thetemperature in the three zones cannotrise or fall unnoticed and impair thewine. Temperature alarm The alarm will sound if the temperaturein one of the zones rises approx. 4 °Cabove or falls approx. 4 °C below theset temperature. The...
Page 21 - Defrosting
Condensate and frost can build up onthe back wall of the appliance whilst itis in use. These are automaticallydefrosted and removed by theappliance. The condensate is drained away via achannel and drain hole into anevaporation system at the back of theappliance. Ensure that the condensate channeland...
Page 22 - Before cleaning; Cleaning and care
Never use cleaning agentscontaining abrasive substancessuch as sand, soda, acids orchemical solvents."Non-abrasive" cleaning agents arealso unsuitable as they can causematt areas to appear. For stainless steel surfaces, use asuitable stainless steel conditioningagent (available fromwww.miele...
Page 24 - Problem solving guide
Repairs to electrical appliancesshould only be carried out by asuitably qualified and competentperson in strict accordance withcurrent local and national safetyregulations. Repairs and other workby unqualified persons could bedangerous. The manufacturercannot be held liable forunauthorised work. Wha...
Page 26 - Noises
Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise canget louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulatingthrough the pipes. Click.... Clicking sounds are made when the t...
Page 27 - How to save energy
Normal energyconsumption Increased energyconsumption Installation site In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not situated near to a heat source(radiator, oven). Situated near to a heat source(radiator, oven). Where the ideal ambi...
Page 28 - Guarantee; After Sales / Guarantee
In the event of a fault which you cannotcorrect yourself, or if the appliance isunder guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele,please quote the model and serialnumber of your appliance. Thisinformation is giv...
Page 30 - Electrical connection AUS, NZ
All electrical work should be carried outby a suitably qualified and competentperson in accordance with local andnational safety regulations. The appliance is supplied with a mainscable and moulded plug ready forconnection to 220-240 V 50 Hz supply. The voltage and frequency are given onthe data pla...
Page 31 - Location; Ventilation; Installation
Do not place any appliance whichgives off heat, such as a toaster ormicrowave oven, on top of thisappliance, as this would increasethe appliance’s energyconsumption. Location The appliance should be installed in adry, well-ventilated room.It should not be installed where it isexposed to direct sunli...
Page 33 - Changing over the door:; Changing the door hinging
The appliance is supplied right handhinged. If left hand door hinging isrequired, follow the instructions below. , We recommend that the changing of the door hinging iscarried out by a qualified kitchenfitter.It is essential that the procedure iscarried out by two people. The glassdoor is very heavy...
Page 35 - Changing over the door lock:
Changing over the door lock: ^ Open the appliance door. ^ Remove the key from the door lock. ^ Remove cover a by inserting a flathead screwdriver into the notch inthe cover (see arrow). ^ Remove both screws b from the lock mounting. ^ Remove lock c together with the lock mounting. To do this you can...
