Miele 2013 - Manual

Burners Wok burner Small, medium and large burners a Burner ring b Burner cap c Burner head d Burner base e Ignitor f Ignition safety device Guide to the appliance 11

Accessories supplied The accessories supplied with your appliance as well as a range of optional onesare available to order from Miele (see "Optional accessories"). Wok ring The wok ring supplied gives additionalstability to the wok, especially thosewith a rounded base. Guide to the applianc...

This appliance complies with allrelevant local and national safetyrequirements. Improper use of theappliance can, however, present arisk of both personal injury andmaterial damage. To avoid the risk of accidents anddamage to the appliance, pleaseread these instructions carefullybefore installation a...

Safety with children ~ This appliance is only intended for use by adults who have read theseinstructions. This appliance is not a toy!To avoid the risk of injury keep childrenwell away and do not let them play withit or use the controls. They will notunderstand the potential dangersposed by it. They...

Technical safety ~ Installation, maintenance and repairs may only be carried out by asuitably qualified and competentperson in strict accordance with currentnational and local safety regulations.Repairs and other work by unqualifiedpersons could be dangerous. Themanufacturer cannot be held liable fo...

~ Faulty components must only be replaced by genuine Miele originalparts. The manufacturer can onlyguarantee the safety of the appliancewhen Miele replacement parts areused. ~ During installation, maintenance and repair work, the appliance must bedisconnected from the mains electricitysupply. It is ...

Disposal of the packingmaterial The transport and protective packinghas been selected from materials whichare environmentally friendly fordisposal, and can normally berecycled. Ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of babies andyoung children. D...

Please stick the extra data plate for theappliance supplied with thisdocumentation in the space provided inthe "After sales service" section of thisbooklet. Cleaning for the first time ^ Remove any protective foil andadhesive labels. ^ Clean all removable parts of theburners with a solution ...

The control is used to ignite the burnerand to regulate the strength of theflame. ß The gas supply is turned off & Strong flame / Weak flame The burners can only be switchedon by pressing in the appropriatecontrol and turning it anti-clockwise,and switched off by turning thecontrol clockwise. Th...

Burner Min. pan base diameter in cm Small burner 10 Medium burner 12 Large burner 14 Wok burner 14 Max. diameter at top of pan in cm Small burner 22 Medium burner 22 Large burner 24 Wok burner 24 – Select pans which are suitable for the burner they are to be used on. Ingeneral: use larger diameter p...

Wok Woks are a special type of pan. Theyhave a small base diameter and largetop diameter, generally between 35 - 40cm. When using the wok burner, makesure that the base of the wok pan doesnot come into contact with the burner.There must be a distance of at least 1cm between the base of the wok andth...

General notes A range of Miele branded cleaning andconditioning products are available toorder from your Miele Dealer, the SpareParts Department or online atwww.miele-shop.com. , Under no circumstances use a steam cleaning appliance to cleanthis appliance. The steam couldattack the electrical compon...

Stainless steel surfaces Clean stainless steel surfaces using anE-Cloth or with a solution of warm waterand a little washing-up liquid appliedwith a soft sponge. In the case ofstubborn dried-on soiling, soak first.Finally, dry with a soft cloth. The ceramic and stainless steel hobcleaner can be used...

To assemble the wok burner ^ Place burner head c onto burner base d so that the the ignitor e and the ignition safety device f extend through their respective holes in theburner head. ^ Replace the burner ring a . ^ Replace the burner cap b . Important: replace parts in the correctorder after cleani...

, Repairs to the gas and electrical components of this appliance mustonly be carried out by a suitablyqualified and competent person toensure safety (Corgi registered inthe UK). Repairs and other work byunqualified persons could bedangerous. The manufacturercannot be held liable forunauthorised work...

Miele branded cleaning and conditioning products areavailable for your appliance. These can be ordered via the internet atwww.miele-shop.com, or from Miele (see back cover forcontact details) or from your Miele dealer. Ceramic and stainless steel hob cleaner 250 ml Removes heavy soiling, limescale d...

Fit the wall units and extractor hoodbefore fitting the hob to avoiddamaging the surface. ~ The room in which the gas hob is installed must be at least 20 m 3 in size with a door or window in it which canbe opened to the outside air. ~ The veneer or laminate coatings of worktops (or adjacent kitchen...

Safety distance above the hob A minimum safety distance must bemaintained between the hob and thecooker hood above it. See the cookerhood manufacturer's operating andinstallation instructions for details. If the manufacturer's instructions arenot available for the cooker hood, aminimum safety distan...

KM 2010 / KM 2011 / KM 2012 / KM 2013 a Front b Building-in depth c Gas connection R 1/2" ISO 7-1 (DIN2999) d Mains connection box with mains connection cable, L = 2,000 mm Appliance and building-in dimensions 35 520 35 650 c b 243 75 54 196 c 0 50 0 30 560 480 - 490 + - 1 d a 2 1 7 ß R4 15

Preparing the worktop ^ Make the worktop cut-out followingthe dimensions applicable.Remember to maintain a minimum safety distance from the back wall , as well as from any tall unit or side wall to the right or left of the hob. See "Safety instructions for installation". ^ Seal the cut surfa...

Do not use any sealant unlessexpressly instructed to do so. Thesealing strip under the edge of the toppart of the appliance provides asufficient seal for the worktop. Do not use sealant between theframe of the top part of the hob andthe worktop.This could cause difficulties if thehob ever needs to b...

All electrical work should be carriedout by a suitably qualified andcompetent person, in strictaccordance with current local andnational safety regulations (BS 7671in the UK). Installation, repairs and other workby unqualified persons could bedangerous. The manufacturercannot be held liable forunaut...

Important The electrical safety of this appliancecan only be guaranteed whencontinuity is complete between it andan effective earthing system, whichcomplies with current local and nationalsafety regulations. It is most importantthat this basic safety requirement ispresent and regularly tested and wh...

, Connection to the gas supply, or conversion from one type of gas toanother, should only be undertakenby an approved and registered gasinstaller in strict accordance withlocal and national safety andbuilding regulations (e.g. Corgiregistered in the UK) Every appliance should have its owneasily acce...

Connection The gas connection must be installedso that connection can be made eitherfrom inside or outside the kitchen unit,and the isolating valve must be easilyaccessible and visible (by opening oneof the kitchen doors, if necessary). After installing the appliance the gasburners have to be set fo...

Nominal ratings for all gas types with the burner full on Burner Gas type KM 2010 / KM 2011 KM 2012 / KM 2013 / KM 2030 kW g/h kW g/h Smallburner Natural gasLiquid gas 1.01.0 - 73 1.01.0 - 73 Mediumburner Natural gasLiquid gas 1.751.75 - 127 1.751.75 - 127 Largeburner Natural gasLiquid gas 2.62.6 - ...

, Connection to the gas supply, or conversion from one type of gas to another, should only be undertaken by an approved and registered gasinstaller in strict accordance with local and national safety and buildingregulations (e.g. Corgi registered in the U.K.). Jet table When converting to a differen...

Changing the jets Disconnect the gas hob from theelectricity supply by switching off atthe socket or by disconnecting themains fuse. To change the main jets ^ Take off the burner cap b , burner ring a (for the wok) and burner head c . ^ Using an M7 socket spanner,unscrew the main jet h ^ Fit the cor...

To change the small jets (for all burners) The top of the appliance has to beremoved before the small jets can bechanged. ^ Loosen the fixing screws on theburners. ^ Pull the control knobs off. ^ Lift the top of the appliance off. ^ Remove ignitor a . ^ Using a small screwdriver, unscrewsmall jet b ...

After changing the jets ^ Reassemble the burner parts in thereverse order, ^ Check all gas fittings for leaks byoperating the burner without the topsection of the hob in place (use amatch to ignite the flame). ^ Remove the loose burner parts again. ^ Replace the top section of the hob. ^ Screw the p...

In the event of any faults which you cannot remedy yourself, or if the appliance isunder guarantee, please contact: – Your Miele dealer, or – the Miele Service Department (see back cover for address). Please note that telephone calls may be monitored and recorded to improveour service. When contacti...