Miele K 1803 Vi - Manual - manualsarea.com

Page 2 - Disposal of your old appliance; Caring for the environment

Disposing of the packagingmaterials The packaging is designed to protectthe appliance from damage duringtransportation. The packaging materialsused are selected from materials whichare environmentally friendly for disposaland should be recycled. Ensure that any plastic wrappings,bags, etc. are dispo...

Page 3 - Empty weight of your machine:; Climate Range; Installation site; – The electrical outlet must be easily; Installation

Have the appliance installed by aqualified technician, according tothe enclosed installationinstructions. WARNINGThis appliance is top-heavy andmust be secured to prevent it fromtipping forward.Keep the door closed until theappliance is completely installedand secured as per the installationinstruct...

Page 7 - If there is a partition with a thickness; from; If there is a partition with a thickness of; more than 6; between; Side panels

Installation with partition using the"Merging Kit" The minimum thickness of the partitionis 5 / 8 " (16 mm). If there is a partition with a thickness from 5 / 8 " (16 mm) to 6 5 / 16 " (160 mm) between the adjacent appliances, theneach appliance should be individuallyinstalled wi...

Page 9 - Dimensions

Door dimensions (open min. 90°) *The dimensions of the door fronts andhandles will vary according to eachindividual kitchen. 3 / 8 " (10 mm) A B C K 18X3 Vi 32 5 / 8 " (829 mm) Door front max. 1 1/2" (38 mm) Door handle* K 19X3 Vi 38 11 / 16 " (982 mm) Door front max. 1 1/2" (38 ...

Page 10 - Niche dimensions

Niche dimensions Niche width (A) K 18X3 Vi 30" (762 mm) K 19X3 Vi 36" (915 mm) Dimensions 44

Page 11 - Power supply; Power bars or extension cords

Power supply 1. Power supply A K 18X3 Vi 15" (381 mm) K 19X3 Vi 18" (458 mm) , Power bars or extension cords are not safe (risk of fire). Do not usethem to connect the appliance tothe power supply. Dimensions 45

Page 12 - Door front dimensions

Door front dimensions A B K 18X3 Vi 79 1 / 8 " (2029 mm) 29 3 / 4 " (756 mm) K 19X3 Vi 79 1 / 8 " (2029 mm) 35 3 / 4 " (908 mm) 4" - 5 3/16" (102 - 132 mm) Dimensions 46 7 7

Page 13 - Before you begin; Tools needed for installation; Installing the appliance

Before you begin Read these instructions completelyand carefully.Have the appliance installed by aqualified technician, according tothe enclosed installationinstructions. To reduce the risk of injury ordamage to the product, two peopleshould be used for installation. These installation instructions ...

Page 15 - Do; not; remove the installation; Do not remove them; parts may be damaged.

^ Do not remove the installation supports from the appliance door.They will be used later in theinstallation niche. There are transportation safetydevices inside the appliance toprotect the shelves and storagecompartments until installation iscomplete. Do not remove them , or parts may be damaged. ^...

Page 17 - Mounting Accessories; The anti-tip brackets

Mounting Accessories The mounting accessories needed forinstalling the appliance into the nicheare included in the packaging. Severalplastic bags are included which arenumbered alphabetically. The bag needed for each step will bemarked with its respective letter. Anti-tip brackets The anti-tip brack...

Page 19 - Remove the edge protectors.

Sliding the appliance into theinstallation space If a side-by-side installation isdesired, connect the two appliancestogether. See the Installation Manualincluded with the "Merging Kit". ^ Unscrew the plinth. ^ To protect the corners of theinstallation space, attach edgeprotectors where need...

Page 20 - Aligning the appliance; The installation aids

Aligning the appliance ^ Align the appliance with the customfront. The installation aids c on the appliance door have been designed forcustom door thicknesses of 3/4"(19 mm) and 1 1/2" (38 mm). The height-adjustable feet at the frontand rear can all be adjusted from thefront: – Front feet: A...

Page 23 - Preparing the custom door

Preparing the custom door ^ Open the appliance door. ^ Unscrew the installation supports l from the appliance door. ^ Loosen the remaining screws fromthe strips m on each side of the door, then remove. ^ Set aside the screws and side strips m - you will need them again later. ^ Remove the light swit...

Page 24 - Mark the distance; only; – Always select the best load-bearing

^ Mark the distance X on the back-side of the custom door. ^ Also calculate and mark the center ofthe custom door Y . ^ Remove the mounting frame from theappliance door and position itaccording to the markings on thecustom door. ^ Pre-drill the holes. ^ Tightly screw on the bracket usingthe pre-dril...

Page 26 - Attaching the fixing brackets; Open the appliance door all the way.; Attaching the covers

Attaching the fixing brackets (Only for appliances using the "Frontpanel gap kit".) The fixing brackets are used to securethe custom door front to the bottom ofthe appliance door. ^ Open the appliance door all the way. ^ Slightly loosen the screw (1.). ^ Position the fixing bracket on theapp...

Page 27 - Attach the light switch cover.; Attaching the toe-kick cover

^ Insert the cover strip into the spacebetween the appliance and thewooden panel.For side-by-side combinations, thecover strips (on both sides of theappliance) are applied to theoutermost spaces only. ^ Attach the light switch cover. Attaching the toe-kick cover The maximum height of the toe-kickcov...

Page 28 - Mounting the air separator

^ Remove the foil from the adhesivestrips. ^ Attach the toe-kick cover to theplinth. Mounting the air separator The air separator keeps the supply andexhaust air separate. This preventswarm exhaust air from flowing into themachine, optimizing the energyperformance of the unit. ^ If necessary, shorte...

Page 29 - Avoid the risk of electrical; Electrical connection

, Avoid the risk of electrical shock- Plug into a grounded 3-prongoutlet.- Do not move the ground plug.- Do not use an adapter.- Do not use an extension cord. Failure to follow these instructionscan result in death, fire, or electricalshock. Improper connection of theequipment grounding conductormay...

Page 32 - MasterCool control panel options for RemoteVision; Status indicators Description of function

MasterCool control panel options for RemoteVision Status indicators Description of function Flashing ; ~ Module booting phase Flashing ; ‡ Not connected to network Flashing ; | Connection to network established, no IP addressassigned Solid ; # Connected to network Flashing ; < In Ad-Hoc Mode, not...

Miele K 1803 Vi - Manual

Table of Contents:

Summary

Other Miele Models