Miele F1901VI - Manual

a Door shelves (height adjustable) b Shelves (height adjustable) c Ice cube maker d Ice cube container e Control panel f Main switch to turn the applianceOn/Off g Freezer basket h Water filter Guide to the freezer 7

Control panel a Access button " p " b Temperature display X colder; Y warmer Allows you to set the desiredtemperature in the freezer c On/Off sensor button for theSuperCool function d On/Off sensor button for the ice cubemaker e Sensor button for the temperatureand door alarm* f Water filter...

Before using for the first time ^ Clean the inside of the appliance andthe accessories with a mild solutionof warm water and liquid dish soap.Dry with a soft cloth. After installing the appliance, wait atleast 30 minutes before switchingthe appliance on. During transport,fluids in the freezer system...

Using the settings When a sensor button has beenselected with a finger touch, it willappear yellow.A de-selected button will appear white. ^ Touch the access button " p " so it turns yellow. On the control panel you will seeadditional sensor buttons to operate theappliance. These buttons all...

The appliance is equipped with analarm system, to ensure that thetemperature does not rise unnoticedbecause of energy loss or an opendoor. The alarm system is alwaysoperational, it does not need to beswitched on. Temperature alarm If the temperature becomes too warm,an alarm sounds and the "alar...

Setting the temperature ^ Touch the access button " p " so it turns yellow. ^ Use the X and Y buttons next to the temperature display to set thetemperature warmer or colder. Tap the X and Y sensor buttons to raise/lower the temperature 1°, or holdit down to move through thetemperature range ...

Freezing food Fresh food should be frozen as quicklyas possible. This helps maintain thenutritional value, vitamin content,appearance and taste of the food. Never refreeze partially or fullydefrosted food. Consume defrostedfood as soon as possible, it will lose itsnutritional value and spoil if left...

Defrosting Frozen food can be defrosted indifferent ways: – in a microwave oven, – at room temperature, – in the refrigerator (the cold given off by the frozen food helps to keep theother food cold), – in a steam oven. Poultry It is especially important to observe proper hygiene whendefrosting poult...

When the SuperCool function isactivated, the appliance is cooled ascold as possible (to a factory-presettemperature). SuperCool The SuperCool function is ideal forfreezing large quantities of unfrozenfood. Ideally the function should beswitched on 4 - 6 hours before the foodis placed in the freezer....

For the automatic ice cube maker tooperate, it must be connected to thehousehold water supply. See"Plumbing". Turning on the ice cube maker Make sure that the ice cube containeris under the ice cube maker, as far aspossible. Ice cubes will not be producedunless the container is completelyclo...

The freezer defrosts automatically. The moisture generated in theappliance collects in the evaporator. Itis automatically defrosted anddissipated by the condenserperiodically. This automatic defrosting systemenables the freezer to remainpermanently ice-free, while ensuringthat the food stored in the...

Moving the shelves The shelves can be adjusted accordingto the height of the food. ^ Using both hands, grasp the shelffrom underneath and lift slightly sothat the rear of the shelf is slightlyabove the mountings. ^ Pull the shelf forward. ^ Move the shelf to the desired height,then insert the (rear)...

Ice cube container The ice cube container is set ontelescopic tracks, and can be removedfor loading, unloading and cleaning. ^ Slide the container forward untilresistance is felt. ^ On both sides of the container, pullthe latches (see arrow) upward andlift the container out of the freezer. Push the ...

To reduce the risk of electricalshock, disconnect the appliancefrom the power supply by shuttingoff the power main, tripping thecircuit breaker or unplugging thepower cord before maintenance. Never use cleaning agentscontaining abrasive substancessuch as sand, soda, acids, chloridesor chemical solve...

Aluminum frames The shelf frames are made ofaluminum. ^ Clean the frames with a mild solutionof warm water and liquid dish soap. Aluminum is susceptible toscratches and nicks, treat with care. The aluminum frames may becomediscolored or otherwise altered ifsoiling is not cleaned awaypromptly. Do not...

Changing the light bulb The lighting automatically switches offafter the door has been open forapprox. 5 minutes. This is not a fault. After the bulb has cooled for a shorttime it will turn on again. If the light does not come on when thedoor is opened briefly, the light bulbshould be changed. ^ Use...

Side lighting ^ Turn the light cover counterclockwiseand pull out. Never touch a halogen bulb withbare fingers.When inserting a glass halogen bulbalways hold with a soft cloth. ^ Pull the defective light bulb from thesocket. ^ Place the new bulb in the socket.Halogen bulb type:5 W/12 V/socket G 4. ^...

The water filter improves the taste andsmell of ice cubes by removing chlorineand other substances from theincoming tap water. It is important to change the waterfilter regularly. To avoid serious illness or death, donot use water that ismicrobiologically or chemicallyunsafe or of unknown quality wi...

Exchanging the water filter ^ Push in and rotate the filter cap onthe base panel of your appliancecounterclockwise 180°, 1 . ^ Pull the used filter cartridge out of theappliance, 2 . ^ Remove the cap from the used filter, 3 . ^ Take a new filter cartridge out of thepackaging and remove the protectiv...

Re-setting the filter indicator The filter indicator still flashes in thedisplay. ^ Touch the access button " p " so it turns yellow. ^ Note the position of the X button, but do not touch. ^ Touch the access button " p " again so it turns white. Only the access button " p " i...

^ Tap the X button until ^ - appears in the display. ^ Touch the access button " p ". ^ Tap the X button until ; appears in the display. ^ Touch the access button " p ". You have left the Custom settingsmode. The "filter" indicator is no longer visibleon the control panel. Wh...

Filter Performance Data Sheet 32 State of California Department of Public Health Water Treatment Device Certificate Number Date Issued: March 10, 2006 Trademark/Model Designation Replacement Elements Date Revised: April 3, 2008 1775 06 - 9000 077095 9000 077104 Miele 07134220 07134220 Manufacturer: ...

With the aid of the following guide minor problems can be corrected without a ser-vice call. Repairs should only be carried out by a qualified and trained person in strictaccordance with local and national safety regulations. Unauthorized repairscould cause personal injury or machine damage and may ...

In the event of a fault which you cannoteasily fix yourself, please contact theMiele Technical Service Department atthe address on the back of this booklet. When contacting the Technical ServiceDepartment, please quote the modeland serial number of your appliancegiven on the data plate inside theapp...

Installation instructions To prevent accidentsand machine damageread these instructions before installation or use.

Disposal of packing materials The cardboard box and packingmaterials are biodegradable andrecyclable. Please recycle. Ensure that any plastic wrappings,bags, etc., are disposed of safely andkept out of the reach of babies andyoung children. Danger of suffocation! Disposal of an old appliance Old app...

Have the appliance installed by aqualified technician, according tothe enclosed installation instructions. WARNINGThis appliance is top-heavy andmust be secured to prevent it fromtipping forward.Keep the door closed until theappliance is completely installedand secured as per the installationinstruc...

Custom door panels This appliance is compatible with allstyles and designs of kitchen cabinetry. The total weight of the decorativepanel(s) must not exceed the following: F 18X1 Vi . . . . . . . . . . . 115 lbs (52 kg) F 19X1 Vi . . . . . . . . . . . . 79 lbs (36 kg) Installation options There are m...

Installation with partition using the"Merging Kit" The minimum thickness of the partitionis 5 / 8 " (16 mm). If there is a partition with a thickness from 5 / 8 " (16 mm) to 6 5 / 16 " (160 mm) between the adjacent appliances, theneach appliance should be individuallyinstalled wi...

Niche dimensions Niche width (A) F 18X1 Vi 30" (762 mm) F 19X1 Vi 36" (915 mm) Dimensions 50

Power supply and water connection 1. Power supply2. Water connection A F 18X1 Vi 15" (381 mm) F 19X1 Vi 18" (458 mm) Door dimensions (open 115°) A B F 18X1 Vi 32 5 / 8 " (829 mm) 14 5 / 16 " (363 mm) F 19X1 Vi 38 11 / 16 " (982 mm) 16 7 / 8 " (428 mm) Dimensions 51

Before you begin Read these instructions completelyand carefully.Have the appliance installed by aqualified technician, according tothe enclosed installation instructions. To reduce the risk of injury ordamage to the product, two peopleshould be used for installation. These installation instructions...

Check the installation niche To ensure a safe, trouble-freeinstallation and the best possiblecosmetic result, check to be surethat the installation space complieswith the installation requirements. ^ Check the base (see "Installation"). ^ Check the dimensions of the cavity. ^ Check that the ...

If the indicator light does not come on,installation of the module wasunsuccessful. In that case, repeat theprocess. If that does not correct theproblem, contact Miele. ^ Pull the antenna d straight out. ^ Guide the cover b over the antenna d and screw on the cover. ^ Angle the antenna d so that it ...

Aligning the appliance ^ Align the appliance with the customfront. The installation aids e have been designed for the following totalthicknesses of custom doors: – 3 / 4 " (19 mm) – 1 1 / 2 " (38 mm) Be sure to take into account thepossible differing thicknesses of thecustom door that is to ...

Preparing the custom door ^ Open the appliance door. ^ Unscrew the installation supports n from the appliance door. ^ Loosen the remaining screws fromthe strips o on each side of the door, then remove. ^ Set aside the screws and side strips o - you will need them again later. ^ Remove the light swit...

^ Mark the distance X on the back-side of the custom door. ^ Also calculate and mark the center ofthe custom door Y . ^ Remove the mounting frame from theappliance door and position itaccording to the markings on thecustom door. ^ Pre-drill the holes. ^ Tightly screw on the bracket usingthe pre-dril...

Attaching and aligning thecustom door front ^ Fit the door handle to the customdoor.Note that the screws are applied fromthe reverse side. ^ Open the door and hang the customdoor with the adjusting rail over thedouble-threaded bolts p . ^ Screw the nuts q a few turns onto the double-threaded bolts. ...

Attaching the lower bracket (Only for appliances using the "Frontpanel gap kit".) ^ Open the appliance door. ^ Screw on the lower brackets. Pre-drillholes in the custom door. The lower bracket corrects the sideposition of the door: ^ Loosen the screw. ^ Check the side position of the door. ^...

Attaching the covers ^ To mount the cover strips on bothsides of the door, click them intoplace from bottom to top, into thegap between the appliance door andthe custom door. ^ Screw the brackets onto both sidesof the appliance, to hold the coverstrip. ^ Insert the cover strip into the spacebetween ...

Attaching the toe-kick cover The maximum height of the toe-kickcover is 4" from the top of the floor.Do not cover the ventilation slits inthe plinth. Risk of damage to theappliance. ^ If required, cut the toe-kick cover tothe required length and height. ^ Attach the plinth to the appliance. ^ Pu...

Mounting the air separator The air separator keeps the supply andexhaust air separate. This preventswarm exhaust air from flowing into themachine, optimizing the energyperformance of the unit. ^ If necessary, shorten the three partsof the air separator. ^ Insert the foam pieces back into thesides. ^...

All plumbing work should be carriedout by a suitably qualified andcompetent person, in accordancewith all applicable local and nationalregulations. The water quality must conform tocountry requirements for drinkingwater. – The appliance is only suitable for connection to the cold water supply. – The...

Preparing the water connection The connection to the householdwater supply must be installedbefore the appliance is installed. ^ Turn off the main water valve to preventdamage caused by leaking water. ^ Attach the connecting pipe to theshut-off valve, according to theinstructions supplied by themanu...

Connecting the water supply When connecting the water pipe tothe solenoid valve of the appliance,follow the instructions supplied bythe manufacturer of the ice cubemaker installation kit. When bending the water pipe, be surenot to kink it, otherwise there is a risk ofleaks and water damage.Use bendi...

, Avoid the risk of electrical shock- Plug into a grounded 3-prongoutlet.- Do not move the ground plug.- Do not use an adapter.- Do not use an extension cord. Failure to follow these instructionscan result in death, fire, or electricalshock. Improper connection of theequipment grounding conductormay...

MasterCool control panel options for RemoteVision Status indicators Description of function Flashing ; ~ Module booting phase Flashing ; ‡ Not connected to network Flashing ; | Connection to network established, no IP addressassigned Solid ; # Connected to network Flashing ; < In Ad-Hoc Mode, not...