Miele ESW761-25 - Manual

The warming drawer is operated by thetimer, the temperature selector and thehumidity control. The controls are only visible when thedrawer is open. Once the warming drawer begins toheat the circulation fan will turn on toevenly heat the drawer. When theselected temperature is reached, theheat and th...

Temperature selector The temperature can be set on orbetween the "Low", "Medium" and "High"settings. The temperature settings: – Low: 140 °F (60 °C) – Medium: 176 °F (80 °C) – High: 203 °F (95 °C) Guide to the controls 9

Humidity control The humidity control adjusts the humid-ity within the drawer. The humiditycontrol can be set anywhere between"Moist" and "Dry". Use oven mitts when adjusting thehumidity control. The control maybecome hot during use. – "Moist": This position closes the vents ...

Temperature And Humidity Suggestions Food Temperature Humidity control Covered 1 / Uncovered Bacon 2 Medium Dry Uncovered Beef Medium / Well Medium Moist Covered Beef Rare Low Moist Covered Bread hard roles Medium Dry Uncovered Bread soft rolls Medium Moist Covered Bread proofing "0" Moist D...

The drawer load will depend on thetype and size of your dishes. The maximum load is 33 lbs (15 kg).Do not rest heavy items on thedrawer. Use the supplied rack to increase theload space. The rack can be inserted in threepositions: middle, left or right. ^ Insert the rack into the slots of therear wal...

Tips – To keep different foods hot, set the temperature for the food requiringthe highest temperature setting.Place the food needing the highestsetting on the rack and the otherfood on the floor of the drawer. – For large quantities of food, it may be necessary to use a higher temp-erature and humid...

Keeping food warm For best results, preheat the warmingdrawer before warming food. ^ Open the drawer. ^ Turn the timer to the desired timesetting. ^ Turn the temperature selector to thedesired temperature setting. ^ Slide the humidity control to thedesired humidity level. Use the"Moist" sett...

Prewarming the dishes The warming drawer can also be usedto warm dishes. Do not preheat thedrawer before warming dishes. Only use heat resistant dishes. ^ Open the drawer. ^ Place the dishes in the drawer. Arrange dishes evenly in the drawerand on the rack. Limit stacks to 2 platesfor better warming...

, CAUTION: Before servicing, disconnect the power supply byeither removing the fuse, shutting offthe power main or manually "trip-ping" the circuit breaker. Do not clean or remove the warmingdrawer until it has cooled.Danger of burns! Appliance front and controlpanel ^ All external surfaces ...

Drawer The drawer can be removed for easiercleaning. Removing the drawer ^ Pull the drawer completely out andloosen the nuts. Be careful when removing the heavydrawer. ^ Remove the non-slip mat. ^ Clean all surfaces of the drawer andthe non-slip mat with a solution ofwarm water and liquid dish soap....

, Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairscould cause an injury or machine damage. Some minor problems can be fixedwithout a service call. What if the drawer does not heat? Possible fault Fix T...

In the event of a fault which you cannoteasily fix yourself, please contact: – Your Miele Dealer or – The Miele Technical Service Department USA 1-800-999-1360 [email protected] CDN 1-800-565-6435 [email protected] When contacting Technical Serviceplease quote the serial number andmodel of the co...

, CAUTION: Before servicing, disconnect the power supply byeither removing the fuse, shutting offthe power main or manually "trip-ping" the circuit breaker. Installation work and repairs shouldonly be performed by a qualifiedtechnician in accordance with allapplicable codes and standards.Rep...

Installation tips – The warming drawer should be placed at a convenient height foreasy access. – The drawer should be installed clear of drafts caused by open doors andwindows. – Proper clearance must be allowed for the warming drawer to open without interference. – The warming drawer must be se- cu...

ESW 700-25: ESW 760-25, 761-25: Appliance dimensions 26

Installing the warming drawer ^ Remove the drawer from the casingbefore installing the appliance in thecabinetry. Removing the drawer ^ Pull the drawer completely out andloosen the nuts. ^ Carefully lift the drawer and pull itslowly out.Set the drawer down on a flat, stablesurface. ^ Push the casing...