Miele ESW 4721 - Manual

General notes ~ Children should not be left alone or unattended in an area where anappliance is in use. They should neverbe allowed to sit or stand on any part ofthe appliance. Caution : Do not store items of interest to children in cabinets above or in thewarming drawer. Children climbing onthe app...

a Timer b Temperature selector c Humidity control d Non-slip mat e Rack f Drawer Guide to the warming drawer 8

The warming drawer is operated by thetimer, the temperature selector, and thehumidity control. The controls are only visible when thedrawer is open. Once the warming drawer begins toheat the circulation fan will turn on toevenly heat the drawer. When theselected temperature is reached, theheat and t...

Temperature selector The temperature is infinitely variablebetween the basic setting (seeillustration) and the "High" setting. The temperature settings: – Basic setting: 97°F (36 °C) – Low: 140 °F (60 °C) – Medium: 176 °F (80 °C) – High: 203 °F (95 °C) Guide to the controls 10

Humidity control The humidity control adjusts thehumidity within the drawer. Thehumidity control can be set anywherebetween "Moist" and "Dry". Use oven mitts when adjusting thehumidity control. The control maybecome hot during use. – "Moist" : This position closes the vents a...

Temperature and Humidity Suggestions Food Temperature Humidity control Covered 1 / Uncovered Bacon 2 Medium Dry Uncovered Beef Medium / Well Medium Moist Covered Beef Rare Low Moist Covered Bread hard roles Medium Dry Uncovered Bread soft rolls Medium Moist Covered Bread proofing Basic setting Moist...

The drawer load will depend on thetype and size of your dishes. The maximum load is 33 lbs (15 kg).Do not rest heavy items on thedrawer. Use the supplied rack to increase theload space. The rack can be inserted in threepositions: middle, left or right. ^ Insert the rack into the slots of therear wal...

Tips – To keep different foods hot, set the temperature for the food requiringthe highest temperature setting.Place the food needing the highestsetting on the rack and the otherfood on the floor of the drawer. – For large quantities of food, it may be necessary to use a higher temp-erature and humid...

Keeping food warm For best results, preheat the warmingdrawer before warming food. ^ Open the drawer. ^ Turn the timer to the desired timesetting. ^ Turn the temperature selector to thedesired temperature setting. ^ Slide the humidity control to thedesired humidity level. Use the"Moist" sett...

Warming dishes The warming drawer can also be usedto warm dishes. Do not preheat thedrawer before warming dishes. Only use heat resistant dishes. ^ Open the drawer. ^ Place the dishes in the drawer. Arrange dishes evenly in the drawerand on the rack. Limit stacks to 2 platesfor better warming. ^ Tur...

, CAUTION: Before servicing, disconnect the power supply byeither removing the fuse, shutting offthe power main or manually"tripping" the circuit breaker. Do not clean or remove the warmingdrawer until it has cooled.Danger of burns! Appliance front and controlpanel ^ All external surfaces an...

Drawer ^ Remove the non-slip mat. ^ Clean all surfaces of the drawer witha solution of warm water and liquiddish soap. ^ Wipe dry with a soft cloth. Non-slip mat ^ Clean the non-slip mat by hand withwarm water and liquid dish soap. Only put the non-slip mat back in thedrawer when it is completely dr...

, Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairscould cause an injury or machine damage. Some minor problems can be fixedwithout a service call. What if the drawer does not heat? Possible fault Fix T...

In the event of a fault which you cannoteasily fix yourself, please contact theMiele Technical Service Department atthe address on the back of this booklet. When contacting Technical Serviceplease quote the serial number andmodel of the warming drawer. MieleCare (only USA) MieleCare , our Extended S...

Disposal of the packingmaterials The cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable. Ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of children.Danger of suffocation! Dis...

, CAUTION: Before servicing, disconnect the power supply byeither removing the fuse, shutting offthe power main or manually"tripping" the circuit breaker. Installation work and repairs shouldonly be performed by a qualifiedtechnician in accordance with allapplicable codes and standards.Repai...

Installation tips – The warming drawer should be placed at a convenient height foreasy access. – The drawer should be installed clear of drafts caused by open doors andwindows. – Proper clearance must be allowed for the warming drawer to open without interference. – The warming drawer must be secure...

Dimensions for Solo Installation ESW 4711 / ESW 4721 a Material must be moisture resistant Installation 25

Dimensions for a combination installation with an oven ESW 4711 / ESW 4721 a Material must be moisture resistant Installation 27 (25) (596) 23 7/16" (580) (280) 11" (5) 3/8" (10) 1" (2,8) (43) 22 (257) a 13/16" 11/16" 1 11/16" 1/8" 3/16" (18) 10 1/8"

Installing the warming drawer ^ Remove the drawer from the casingbefore installing the appliance intothe cabinetry. Removing the drawer ^ Pull the drawer out and loosen thenuts on the left and right a sides. ^ Carefully lift the drawer and pull itslowly out.Set the drawer down on a flat, stablesurfa...

Integrated installations Models 4701 FB and 4801 FB Custom made front panels can beinstalled with models 4701 FB and4801 FB. Panel dimensions 4701 FB Width 27 3 / 8 " (695 mm) Height 11" (279 mm) 4801 FB Width 29 13 / 16 " (757mm) Height 11" (279 mm) The custom panel must be at least...