Miele DAS 4720 - User Manual

IMPORTANT SAFETY INSTRUCTIONS 5 Technical safety  WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: - Use this appliance only in the manner intended by the manufacturer. If you have questions, contact Miele. - Before servicing or cleaning the applianc...

IMPORTANT SAFETY INSTRUCTIONS 7 Correct use  WARNING: TO REDUCE THE RISK OF A COOKTOP GREASE FIRE: - a) Never leave surface units unattended. Boilovers cause smoking and greasy spillovers may ignite. Heat oils slowly on low ormedium settings. - b) Always turn the hood on when cooking at a high heat...

IMPORTANT SAFETY INSTRUCTIONS 8  The ventilation hood may become damaged if exposed to excessive heat from a gas cooktop. - When using the ventilation hood over a gas cooktop, ensure that any burners in use are always covered by cookware. Turn burnersoff when removing the cookware, even if doing so...

IMPORTANT SAFETY INSTRUCTIONS 10 Cleaning and maintenance  There is a risk of fire if cleaning is not completed according to the instructions in this manual.  Never use a steam cleaner to clean the ventilation hood. The steam can reach the electrical components and cause a shortcircuit. Accessorie...

Caring for the environment 11 Disposal of the packing material The cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable.Ensure that any plastic wrappings, bags,etc. are disposed of safely and kept outof the reach of childr...

Description of functions 14 The following functions are available onyour ventilation hood, depending on themodel: Extraction mode Air entering through the intake iscleaned by the grease filters andconducted out of the building. Recirculation mode (only with conversion kit and charcoalfilters as opti...

Before using for the first time 15 Selecting extraction mode orrecirculation mode The ventilation hood can be operatedwith either extraction mode orrecirculation mode. The power of theblower is adapted to suit the selectedmode of operation. The ventilationhood is set up at the factory forrecirculati...

Before using for the first time 16 Performing Scan & Connect  Scan the QR code. If you have installed the Miele app andhave a user account, you will be takendirectly to the networking steps.If you have not yet installed the Mieleapp, you will be taken to the Apple AppStore ® or the Google Play ...

Before using for the first time 17 Setting up Con@ctivity Con@ctivity is the directcommunication system between aninduction Miele cooktop and a Mieleventilation hood. It enables theventilation hood to operateautomatically depending on theoperational state of a Miele cooktopwith onset controls. - Whe...

Before using for the first time 18 When successfully connected, 2 and 3 will light up constantly.  Quit connection mode on theventilation hood by pressing thedelayed shutdown control   . Con@ctivity has now been activated. With a direct WiFi connection, it is notpossible to connect the cooktop and...

Operation (Automatic mode) 19 When Con@ctivity is active, theventilation hood always operates inautomatic mode (see “Before using forthe first time – Setting upCon@ctivity”).If you wish to operate the ventilationhood manually; see “Operation(Manual mode) – Cooking withoutCon@ctivity”. Cooking with C...

Operation (Automatic mode) 20 Switching off  Turn off all burners. Over the next few minutes, theventilation hood blower setting willdecrease one level at a time until thehood eventually turns off.This helps to neutralize any lingeringvapors and odors in the air. - From the Booster setting, the blo...

Changing settings 24 Adjusting the grease filter filtersaturation indicator The filter saturation indicator can be setto suit the customer ’s cooking habits.The factory default setting is a cleaninginterval of 30 hours. - Select a shorter interval of 20 hours if food is fried regularly. - A shorter ...

Cleaning and care 26  Before proceeding with any maintenance or cleaning task, theventilation hood must bedisconnected from the power supply,see “IMPORTANT SAFETYINSTRUCTIONS”. Stainless steel housing General information Unsuitable cleaning agents candamage the surfaces and controlelements.Do not u...

Cleaning and care 27 Filter saturation indicator The ventilation hood registers the lengthof time it has been operated.Filter saturation indicators show whenthe filters need to be cleaned orchanged by lighting up the grease filtersymbol   or charcoal filter symbol   . You can set the filter satura...

Cleaning and care 28 Removing the grease filters  When handling the grease filter, be careful not to drop it.This can result in damage to the filterand the cooktop below.Make sure you hold the filter securelyat all times when handling it.  Pull out the deflector plate.  Support the grease filter ...

Cleaning and care 29 Cleaning the grease filter in adishwasher  Place the grease filter upright orslightly inclined in the lower basket.Ensure the spray arm is notobstructed.  Use a commonly available householddishwashing detergent.  In a Miele dishwasher use the“Normal” program. Depending on the...

Cleaning and care 30 Resetting the filter saturation indicatorfor the grease filter Once cleaning is complete, the filtersaturation indicator must be reset.  While the fan is turned on, press thefilter saturation indicator   for approx. 3 seconds until 1 is the only indicator flashing. The grease...

Cleaning and care 31 Installing /replacing the charcoal filters The matching frames must be installedin order to use the charcoal filter.Follow the directions on theinstallation sheet.  Remove the grease filter from theventilation hood.  Remove the charcoal filter packaging.  Push the charcoal fi...

Installation *INSTALLATION* 32 Before installation  Before installation, it is important to read the information contained inthis chapter and in the “IMPORTANTSAFETY INSTRUCTIONS” chapter. Information is subject to change. Pleaserefer to our website to obtain the mostcurrent product specification, ...

Installation *INSTALLATION* 33 4 screws, M4 x 8 mm 5 (9)* screws, 4 x 15 mm 4 screws, 4 x 30 mm 8 (12)* screws, 4 x 15 mm 4 screws, M4 x 12 mm* 4 screws, M4 x 8.5 mm* 2 screws, 3.9 x 7.5 mm with cover caps * For 35 ¹/₄" (896 mm) wide appliances Montage Installation Montaje Montaggio Montering Mo...

Installation *INSTALLATION* 34 Appliance dimensions Diagram 1:DAS 4720 in a 23 5/8" (600 mm) wide cabinet. The drawing is not to scale.

Installation *INSTALLATION* 36 Diagram 3:DAS 4920 in a 23 5/8" (600 mm) wide cabinet or in a 35 7/16" (900 mm) widecabinet with side compartments The drawing is not to scale. See diagram 1 for side view. Footnotes for diagrams 1 to 3: a Vented or recirculation with DUU 150 conversion kit b D...

Installation *INSTALLATION* 37 Distance between cooktop and ventilation hood (S) Provided a larger distance is not given by the manufacturer of the cooktop,follow the minimum safety distances between a cooktop and the bottom of thehood.Please also observe the information contained in the “IMPORTANT ...

Installation *INSTALLATION* 38 Installing the depth stop(optional) You can limit how far the deflector platecan be pushed in.For example, if the deflector plateshould sit flush with the front edge ofthe cabinet door when pushed in, ratherthan with the front edge of the cabinethousing, you can positi...

Installation *INSTALLATION* 39  Slide the covers back again.  Carefully push in the deflector plateas far as the required position. This will push the depth stops into therequired position.  Use a pen to mark the back edge ofthe deflector plate on the cover.  Pull out the deflector plate.  Dril...

Installation *INSTALLATION* 40 Air venting WARNING: Danger of toxic fumes.Gas cooking appliances releasecarbon monoxide that can be harmfulor fatal if inhaled.To reduce the risk of fire and toproperly exhaust air, the exhaustgases extracted by the hood shouldbe vented outside of the building only.Do...

Installation *INSTALLATION* 41 Condensate If the ducting is to run through coolrooms or ceiling space, for example, thesignificant variations in temperaturebetween the different areas can causecondensate to form. Insulate theducting to reduce temperaturevariations.If the ducting is to be laid horizo...

Installation *INSTALLATION* 42 Electrical connection WARNING: TO REDUCE THE RISKOF FIRE, ELECTRIC SHOCK, ORINJURY TO PERSONS, OBSERVETHE FOLLOWING:All electrical work should beperformed by a qualified electrician instrict accordance with nationalregulations (for USA: ANSI-NFPA70) and local safety re...

Customer Service 43 Information to help you rectify faultsyourself and about Miele spare partscan be found at www.miele.com/service. Contact in the event of a fault In the event of a fault which you cannotremedy yourself, please contact yourMiele dealer or Miele Customer Service. You can book a Miel...

Technical data 44 Fan motor 350 W Overhead lighting 3 W Total connected load 353 W Supply voltage, frequency 120 V AC, 60 Hz Fuse rating 15 A Power cord length 2.5 ft (0.75 m) Weight DAS 4720 35.3 lbs (16 kg) DAS 4920 37.5 lbs (17 kg) WiFi module Frequency range 2.400–2.4835 GHz Maximum transmission...

9 Independence WayPrinceton, NJ 08540www.mieleusa.com U.S.A. Miele, Inc. National Headquarters Please have the model and serial numberof your appliance available whencontacting Customer Service. Canada ImporterMiele Limited Headquarters and Miele Centre Customer Support Phone: 888-99-MIELE (64353)[e...