Miele 11619730 - User Manual

 fold here

 fold here

 fold here

 fold here

 fold here

 fold here

OPERA

TION

DR

YING

CHANGING THE PROGRAM SEQUENCE



Before commissioning the tumble

dryer for the first time, make sure it has
been installed correctly. Connect it cor-
rectly.
Please read the separate operating in-
structions supplied with the appliance.



Damage caused by switching the ap-

pliance on too soon.
The heat pump can be damaged.
After installing the tumble dryer, wait for at
least one hour before starting a drying
program.

Switching on the tumble dryer



Turn the program selector to a program.

The tumble dryer is switched on when you
select a program and switched off by turn-
ing the program selector to the



 position.























a

Control field

The



,



,



, and



sensor buttons

react to fingertip contact. Selection is
possible as long as the respective sen-
sor button is lit.

– If a sensor button is brightly lit, this

means it is currently selected.

– If a sensor button is dimly lit, this

means it can be selected.

b

Sensor buttons for the drying levels

After selecting a drying-level program
with the program selector, touch one of
the sensor buttons to select a drying
level.

c

Indicator lights

–



 Empty the condensed-water con-

tainer

–



 Clean the plinth filter/lint filters

–



 

PerfectDry

 for drying-level pro-

grams

d

Gentle

 sensor button

For temperature-sensitive fabrics with
the



 symbol.

e

Time display

The remaining program duration will be
displayed in hours and minutes.

f

Sensor buttons

–



 for the Delay start function

–

 

 for the duration of the Delay

start function or the

Time Dry/

DryFresh

 program cycle time

g

Start/Add laundry

sensor button

Touching the

Start/Add laundry

 sensor

button starts the selected program. The
current program can be interrupted to
add laundry. The program can be
started as soon as the sensor button is
flashing on and off. The sensor button
lights up constantly once the program
has started.

h

Optical interface

For Service.

i

Program selector

The program selector can be turned
clockwise and counterclockwise.

–



 

MobileStart

: remote control via

the app.

Energy savings

There are various steps you can take to
avoid unnecessarily long drying times and
high energy consumption:

- Make sure your laundry is spun at the

maximum spin speed before drying.

- Load according to the optimum amount

of laundry recommended for the drying
program. This will mean that the energy
consumption for the amount of laundry is
at its most economical.

- Clean the lint filters after every drying cy-

cle.

- Make sure the room temperature is not

too high.
If there are other heat-producing appli-
ances in the room in which the tumble
dryer is located, make sure the room is
well ventilated and switch the other appli-
ances off.

Preparing the laundry



Damage due to foreign objects which were not re-

moved from the laundry.
Foreign objects can melt, burn, or explode.



Ensure that any foreign objects (e.g., detergent dis-
pensing balls, loose bra wires, lighters) have been re-
moved from the laundry.



Fasten duvet covers and pillow cases to prevent small
items from being rolled up inside them.

Loading the tumble dryer

Do not overload the drum. Overloading can give a disap-
pointing drying result and cause unnecessary wear and
tear to the laundry. It can also cause more creasing.



Loosen the laundry.



Open the tumble-dryer door.



Check that the drum is empty.



Load the laundry in the drum.



Insert the fragrance flacon.

If you are drying without a fra-
grance flacon, close both sock-
ets. Push the tabs on both covers
to the bottom (see arrows).



Shut the tumble-dryer door gen-
tly.

Risk of damaging laundry.
When closing the door, make
sure that laundry does not get
trapped in the door opening.

1

Condensed-water container

2

Door

3

Control panel

4

Plinth-filter flap

5

Grille for cold-air intake

1. Selecting a program



Turn the program selector to a program. The drum light-
ing will come on.

2 possible ways to select a program:

1. Selecting the standard programs with the program
selector



Turn the program selector to the required program.

A suggested drying level may also light up brightly and du-
rations will appear.

2. Selecting programs via the



 MobileStart

program-selector position



Turn the program selector to the



 

MobileStart

posi-

tion.



Touch the

Start/Add laundry

sensor button.

The tumble dryer can now be operated via a mobile device
together with the Miele app.

2. Selecting program settings

Selecting the drying level

Drying levels can be selected for certain programs as per
the “Program guide” table.



Touch the sensor button for the
drying level you want. It then
lights up brightly.

Selecting the program cycle time

You can select a program cycle time for the

Time Dry/

DryFresh

 program.

  







Touch the



 sensor button re-

peatedly until the required time
lights up.



You can reduce the time with the



 sensor button.

Gentle

Delicate fabrics with the



 symbol on the

care label, e.g., acrylic garments, are dried
at a lower temperature.



Touch the sensor button. It then lights up
brightly.



Delay start/SmartStart

Delay start

With the Delay start function, you can delay
the start of the program. The start of the
program can be delayed from 30 minutes
up to a maximum of 24 hours.

 











Touch the



 sen-

sor button. It then
lights up brightly.



Touch the



or



 sensor button

to delay the start
of the program.

SmartStart

The SmartStart function lets you define a
time period during which your dryer will
start automatically.

3. Starting a program



Touch the flashing

Start/Add laundry

sensor button.

The

Start/Add laundry

 sensor button lights

up and the program starts.

Adding or removing laundry

You have forgotten an item of laundry, but
the program has already started.



Touch the

Start/Add laundry

sensor but-

ton.



 will light up* on the time display.



Open the tumble-dryer door.



Add or remove laundry items.



Close the door.



Touch the

Start/Add laundry

sensor but-

ton.

The program starts.
* Exceptions
In some cases – for example, during the
cooling phase or the

Proofing

 program – it

is not possible to add laundry items.



does not light up in this case.

Canceling the current program

You cannot change to another program
once a program has started. This prevents
the appliance being operated unintention-
ally.
If you adjust the program selector, the



 symbol will light up in the time display.

This indicator goes out when you select the
original program.



Turn the program selector to the



 posi-

tion.

The program is canceled. You can now se-
lect a new program.

Program end

End of program:



lights up and the

Start/Add laundry

 sensor button goes out.

- 10 minutes after the end of the program,

the

Start/Add laundry

 sensor button will

begin to flash slowly and the display will
go out.

- The tumble dryer switches off automati-

cally.

Do not open the tumble-dryer door before
the end of the program.



Open the door.



Remove the laundry.

Items left in the tumble dryer could be
damaged by over-drying when the dryer is
used the next time.
Always remove all items from the drum.

If the dryer is switched on at the power
supply and the door is opened, the drum
lighting will come on. The drum lighting will
go out after a few minutes to save energy.



Turn the program selector to



.



Clean the lint filters.



Close the drum door.



Empty the condensed-water container.

Emptying the condensed-water
container

Empty the condensed-water container af-
ter every drying program.

The



 indicator light will light up if the maxi-

mum level of the condensed-water con-
tainer is reached.



Open and close the door to deactivate
this message.



Remove the con-
densed-water
container.



To prevent water running out, hold the
condensed-water container by the front
panel and at the back to keep it in a hori-
zontal position.



Empty the con-
densed-water
container.



Replace the con-
densed-water
container in the
dryer.

Tip:

This tumble dryer has 2 sockets for

inserting fragrance flacons. You can use
one or both sockets to give your laundry a
pleasant scent.

Close the unused socket.

Before using a fragrance flacon, please
read “IMPORTANT SAFETY INSTRUC-
TIONS – Using a fragrance flacon (op-
tional accessory)” and “Fragrance flacon”
in the operating instructions.

Inserting a fragrance flacon

1.

2.

3.

4.

Marker



must be in position



.

5.

6.



Turn the outer ring clockwise a little.

Marker



must be in position



.

Setting the fragrance intensity



The further you
turn the outer ring
of the fragrance
flacon clockwise,
the more intense
the fragrance.

Closing the fragrance flacon



Turn the outer
ring counter-
clockwise until
marker 



is in

position 



.

Removing the fragrance flacon



Turn the outer
ring until marker



is in position



.



Remove the fragrance flacon.

To prevent any fragrance running out of
the flacon, do not lay it down on any
surface.



Only store the fragrance flacon in its
original packaging.

Before the first use

Operation

Drying

Program end

FragranceDos

 fold here

 fold here

 fold here

 fold here

 fold here

 fold here

en-US

M.-Nr

. 11 631 560

TWD 360 WP