Miele 11503670 - User Manual

IMPORTANT SAFETY INSTRUCTIONS 6 Appropriate use  This wine conditioning unit is intended for use in domestic house- holds and similar residential environments such as - staff kitchen areas in shops, offices and other working environ- ments - farm houses and by clients in hotels, motels and other re...

IMPORTANT SAFETY INSTRUCTIONS 7 Safety with children  Children near the wine conditioning unit must be supervised. Do not let children play with the wine conditioning unit.  The wine conditioning unit door hinges can cause injury. Keep children away at all times.  Ensure that any packing material...

IMPORTANT SAFETY INSTRUCTIONS 8 Technical safety  The refrigerant circuit has been checked for leaks. The wine con- ditioning unit complies with statutory safety requirements.  This wine conditioning unit contains the coolant Isobutane (R600a), a natural gas which is environmentally friendly. The ...

IMPORTANT SAFETY INSTRUCTIONS 10  In environments with a tropical climate (above approximately 90°F (32°C) and above approximately 70% humidity), the wine condition-ing unit must be operated in an air-conditioned room. Otherwise, it isnot possible to guarantee that the wine conditioning unit will o...

IMPORTANT SAFETY INSTRUCTIONS 11  WARNING! DANGER of overheating! Do not cover or block the air vents. This can impair the efficiency of the appliance, increase thepower consumption and cause damage to the appliance.  If the wine conditioning unit is used for storing food which con- tains fat or o...

IMPORTANT SAFETY INSTRUCTIONS 12 Stainless steel machines:  Adhesives will damage the coated stainless steel surface and cause it to lose its dirt-repellent protective coating. Do not use stickynotes, transparent adhesive tape, masking tape, or other types ofadhesive on the stainless steel surface....

IMPORTANT SAFETY INSTRUCTIONS 13 Cleaning and maintenance  Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time.  Do not use a steam cleaning appliance to clean this wine condi- tioning unit.The steam could reach electrical components and cause a short ...

IMPORTANT SAFETY INSTRUCTIONS 14 Disposal of your old appliance  Children could become trapped in the machine and could suffo- cate. - Remove the machine doors. - Leave the wooden shelves in the machine so children cannot climb inside.  DANGER of electric shock! - Cut the plug off the power cord. ...

Caring for the environment 15 Disposal of packaging material The packaging is designed to protectthe wine conditioning unit from damageduring transportation. The packagingmaterials used are selected from mate-rials which are environmentally friendlyfor disposal and should be recycled. Ensure that an...

Installation *INSTALLATION* 16 Installation location This appliance should be installed in adry, well-ventilated room. When deciding where to install yourwine conditioning unit, please bear inmind that it will use more energy if in-stalled near to a heater, a range, or an-other appliance that gives ...

Installation *INSTALLATION* 17 Climate class This wine storage unit is designed foruse in climate class SN-T (room tem-perature range). Do not use in a climateclass for which it is not designed. Climate class Room tempera- ture SN 50°F to 90°F/ +10°C to +32°C N 60°F to 90°F/ +16°C to +32°C ST 60°F t...

Installation *INSTALLATION* 18 Installation notes  Risk of damage and injury from the wine conditioning unit tippingover.The wine conditioning unit is veryheavy and can tip forwards when theappliance door is open.Keep the appliance door shut untilthe wine conditioning unit has beeninstalled and sec...

Installation *INSTALLATION* 19 Ventilation  Risk of fire and damage due to insufficient ventilation.If the wine conditioning unit is notventilated sufficiently, the compres-sor will run more frequently and forlonger periods. This causes increased energy con-sumption and an increased com-pressor ope...

Installation *INSTALLATION* 20 If the door hinges of the appliancesare next to each other, you must takeinto account the thickness of thecabinet fronts and door handles sothat the appliance doors do not col-lide and become damaged if they areopened at the same time. The wine conditioning units/refri...

Installation *INSTALLATION* 21 Installation dimensions Position of the electrical connection - The electrical connection must not be positioned higher than 9" (228 mm) above the floor. The electrical socket must not be concealed behind the appliance and must beeasily accessible in an emergency.

Installation *INSTALLATION* 24 Dimensions when the appliance door is open (opening angle 90°/115°) 3/8" (10 mm) A D B C A B C D 26 5/8" (677 mm) Cabinet front Door handle 11 5/8" (296 mm)

Installation *INSTALLATION* 25 Installing the wine conditioningunit Before starting... It is essential to read these installa-tion instructions carefully beforestarting to install the wine condition-ing unit.The wine conditioning unit should beinstalled by a suitably qualifiedtradesman in accordance...

Installation *INSTALLATION* 26 Tools required - Cordless drill - TX 20 screwdriver - Hammer drill - Drill bits in various sizes, depending on materials - Hammer - Open-ended wrench - Ratchet wrench, attachment: socket, 5/16" (8 mm) - Adhesive tape - Utility knife - Pipe wrench - Level - Tape mea...

Installation *INSTALLATION* 27 Checking the installation niche  Check the installation dimensions(see “Installation – Installation dimen-sions”).  Check the position of the electricalconnection. The length of the powercord is 9' 10" (3 m). The electrical socket must not beconcealed behind the ...

Installation *INSTALLATION* 28  Unscrew the fixing brackets   .  With the help of several people as re-quired, carefully lift the wine storageunit from the pallet, starting with theback of the appliance.  Risk of damaging the floor from the load.Moving the wine storage unit cancause damage to th...

Installation *INSTALLATION* 29 The anti-tip brackets prevent the winestorage unit from tipping. The anti-tip brackets are also used to fixthe installation niche securely to thesurrounding walls. 2  Use 2 anti-tip brackets   for each in- dividual wine storage unit or 4 anti-tipbrackets for each (si...

Installation *INSTALLATION* 31 Pushing the wine conditioning unitinto the niche Then push the wine conditioning unitinto the niche, taking care not todamage the electrical cord. If you are installing two wine storageunits or a wine storage unit and an-other refrigeration appliance side byside, now s...

Installation *INSTALLATION* 32 Tip: Secure the power cord to prevent it becoming caught: tie a piece of stringto the middle of the cord and as thewine storage unit is being pushed intothe niche, pull the cord forward under-neath the wine storage unit.  Push the wine storage unit carefullyinto the i...

Installation *INSTALLATION* 33  Position the supplied spacers  on both sides on the markings next tothe adjustable feet at the front of thewine storage unit.  Adjust the front feet with a ratchet (at-tachment: 5/16" (8 mm) socket) or aTX 20 screwdriver  .

Installation *INSTALLATION* 34  Adjust the front feet with a ratchet (at-tachment: 5/16" (8 mm) socket) or aTX 20 screwdriver  . Tip: Proceed carefully when adjusting the feet, alternating between the leftand right feet.  Unscrew the feet  and  on both sides at least until the marking on th...

Installation *INSTALLATION* 35 Securing the wine conditioning unitin the niche  Use the screws supplied to securethe wine storage unit on both sides. In a side-by-side combination, onlythe external panels of the two appli-ances can be secured to the cabinetwall. Securing the toe-kick board andcover...

Installation *INSTALLATION* 36 Aligning the appliance door Following installation, align the appli-ance door with adjacent cabinet fronts. To do this, check the gaps to the adja-cent cabinet fronts.  If necessary, use the spacers pro-vided   and place them on both sides of the appliance door at th...

Installation *INSTALLATION* 37  Remove the cover   from the light contact switch.  Remove the nuts   and washers from the threaded bolts   .  Align the height and sides of the ap-pliance door using the threadedbolts   .  If necessary, also align the depth ofthe appliance door via the gaps in...

Installation *INSTALLATION* 39 Limiting the opening angle of the ap-pliance door The door hinges are set ex works to en-able the appliance door to be openedwide. If, for example, the appliance door hitsan adjacent wall when it is opened, youshould limit the opening angle of theappliance door to 90°:...

Installation *INSTALLATION* 40 Electrical connection  Risk of electric shock! The wine conditioning unit must onlybe switched on when it has been in-stalled in accordance with the instal-lation instructions.Ground the wine conditioning unit.The wine conditioning unit must notbe grounded via a gas p...

Installation *INSTALLATION* 41 If the outlet is no longer accessible afterinstallation, an additional means of dis-connection must be provided for allpoles. Suitable means of disconnectioninclude switches with an all-pole con-tact gap of at least 1/8" (3 mm). Thesecan be circuit breakers, fuses,...

Saving energy 42 Normal energy consumption Increased energy consumption Installation /Maintenance In a well-ventilated room. In an enclosed, poorly venti-lated room. Protected from direct sun-light. In direct sunlight. Away from heat sources (ra-diator, range/oven). Near a heat source (radiator,oven...

Saving energy 43 Normal energy consumption Increased energy consumption Use Wooden shelves arrangedas they were when the appli-ance was delivered. Only open the door whennecessary and for as short atime as possible. Store winebottles in an organized way. Frequent opening of thedoor for long periods ...

Guide to the appliance 44 a Display b On/Off switch c Wooden shelves with labels d Interior lighting e Isolator plate for thermal separation of the wine conditioning zones f SommelierSet* g Glass door with UV filter h Automatic door opening (Push2open/Pull2open)

Guide to the appliance 46 Start screen °F 52     1 2 3 4 5 °F  52 °F 52 a Temperature display (target temperature) for the three wine conditioning zones b   sensor For setting the temperature and humidity  c   sensor control For switching the interior lighting on and off when the appliance d...

Guide to the appliance 47 Settings mode   In Settings mode, you can select the following appliance functions and alter theirsettings to some extent: Symbol Function  Language Set  Display Brightness Adjust (darker to brighter) Color Scheme Set (dark or bright)  /  Buzzer Tones Adjust the volume...

Guide to the appliance 48  Factory Default Reset to default settings (see “Selecting additional settings”)  Ambient Lighting Choose between 5 different settings for ambientlighting (see “Selecting additional settings”) Ambient Display Set the appearance of the display when the dooris closed (see “...

Accessories 49 Accessories supplied Appliance plug Chalk Use the chalk supplied to write on themagnetic strips on the wooden shelvesfor easy identification of the wines instorage. Toe-kick cover in stainless steel look The toe-kick cover in stainless steellook ensures a uniform stainless steelappear...

Before first use 50 Before first use Allow the wine conditioning unit tostand for approx. 1 hour prior to con-necting it to the power supply.This will help prevent any malfunc-tions. Packaging material  Remove all packaging material fromthe inside of the wine conditioningunit. Always remove all pac...

Before first use 51 Once your wine storage unit is con-nected to your WiFi network you canuse the app to carry out the followingactivities, for example: - Call up information on the operating status of your wine storage unit - Change the settings on your wine storage unit Connecting your wine storag...

Before first use 52 Operating the wine condition-ing unit The touch display can be scratchedby pointed or sharp objects, e.g.,pens.Only touch the display with your fin-gers. If your fingers are cold, the touchdisplay may not react.   °F   °C  -18 °C  °F 52     °F  52 °F 52 The sensor cont...

Before first use 53 Starting up for the first time  Open the appliance door.  Switch the wine storage unit on bypressing the On/Off switch. The On/Off switch is located belowthe display. The wine storage unit will start to cooland the interior lighting will come onwhen the appliance door is opened...

Switching the wine conditioning unit on and off 54 Switching the wine storageunit on  Open the appliance door.  Switch the wine storage unit on bypressing the On/Off switch. The wine storage unit will start to cooland the interior lighting will come onwhen the appliance door is opened. Miele will ...

Switching the wine conditioning unit on and off 55 Switching off for longer peri-ods of time If the wine storage unit is not going tobe used for a longer period of time:  Switch the wine storage unit off.  Unplug the appliance or switch offthe breaker.  Clean the wine storage unit.  Leave the do...

Selecting additional settings 56 In Settings mode   , you can select dif- ferent wine conditioning unit functionsand alter their settings to some extent,allowing you to adjust the appliance tosuit your requirements. Only the functions in Settings mode   that require further explanation are de-scri...

Selecting additional settings 57 Performing a Self Test    Perform a Self Test if you are concerned that your wine conditioning unit is notworking properly and want to check if itis suffering from any problems.  In Settings mode   , use the   and   sensor controls to select the Self Test and se...

Selecting additional settings 58 Switching on Push2Open  In Settings mode   , use the   and   sensor controls to select Door As- sistant and select OK to confirm your selection.  Use the   and   sensor controls to select Mode and select OK to confirm your selection.  Use the   and   sensor...

Selecting additional settings 59 – Adjusting the intensity You can also adjust the intensity of the Pull2Open function. The lower the set in- tensity, the less force required whenyou pull the appliance door.  In Settings mode   , use the   and   sensor controls to select Door As- sistant and sel...

Selecting additional settings 60 Miele@home Setting up Miele@home The message Set up Miele@home only appears if your wine storage unit hasnot yet been connected to a WiFi net-work.  Connect your wine storage unit asdescribed in “Before using for thefirst time”. Deactivating Miele@home  In Settings...

Selecting additional settings 61 Setting up Miele@home again If you have changed your WiFi network,you can set up Miele@home again foryour wine conditioning unit.  In settings mode   , use the   and   arrow buttons to select  Miele@home and select  OK to confirm your selec- tion.  Use the   an...

Selecting additional settings 62 Resetting the settings to their default settings   You can reset the wine conditioning unit‘s settings to their default settings. Reset the wine conditioning unit’s settings to the default settings when disposingof your wine conditioning unit, selling it, or putting...

Selecting additional settings 63 The wine conditioning unit‘s settings will be reset to the following values: Function Default settings  Language English  Display Brightness Average value (4 of 7 segments) Color Scheme Dark  /  Buzzer Tones Average value (4 of 7 segments) / Keypad Tone Average v...

Selecting additional settings 64 Switching Sabbath Mode    on or off The wine conditioning unit offers a Sab- bath Mode for the purposes of religious observance. When Sabbath Mode is switched on, you cannot make any settings on yourwine conditioning unit. Ensure that the appliance door isproperly c...

Selecting additional settings 65 Switching Ambient Lighting    on or off The Ambient Lighting can be switched on so your wines are on display even whenthe appliance door is closed. The inte-rior lighting now remains on even whenthe appliance door is closed. Each wine conditioning zone has itsown li...

Selecting additional settings 66  Risk of injury from LED lighting. This lighting corresponds to riskgroup RG 2. If the cover is defective,there is a risk of eye injury.If the lighting cover is defective, donot look from a close range directlyinto the lighting with optical instru-ments (e.g., magni...

The ideal temperature and humidity 67 Wine continues to mature depending onthe surrounding conditions. The lengthof time for which wine can be kept ingood condition will therefore dependnot only on the temperature but also onthe air quality. The wine conditioning unit with its con-stant ideal temper...

The ideal temperature and humidity 68 Isolator panels for thermal separation The wine conditioning unit has twofixed isolator panels that divide the inte-rior into three zones, which can be con-ditioned in different ways. This meansthat you can store up to three differenttypes of wine at the same ti...

The ideal temperature and humidity 69 The temperature display always showsthe required temperature. If you have adjusted the temperature, wait for approx. 6 hours if the wineconditioning unit is not very full andfor approx. 24 hours if the wine con-ditioning unit is full before checking the temperat...

The ideal temperature and humidity 70 Not increasing the humidity    Touch the   sensor control to set the temperature.  Use the   and   sensor controls to select the wine conditioning zone forwhich you do not want to increasethe humidity and select OK to confirm your selection.  Touch the  ...

Door alarm 71 Door alarm An alarm will sound if the appliancedoor has been left open for longer thanapprox. 2 minutes.The Close the door message also ap- pears on the display. As soon as the door is closed, thealarm will stop and the message on thedisplay will disappear. Turning the door alarm off e...

Storing wine bottles 72 Always observe USDA food safetyguidelines.  WARNING! Fire hazard! Do not operate any electrical equip-ment inside the wine conditioning.This can cause sparking. Vibration and movement have a nega-tive effect on the maturing processwhich can in turn affect the taste of thewin...

Storing wine bottles 73 Wooden shelves The wooden shelves are mounted ontelescopic runners which can be pulledout to make it easier to store and re-move bottles. Moving the wooden shelves The wooden shelves can be removedand replaced again if required.  Pull the wooden shelf out until itstops, then...

Storing wine bottles 74 Labeling the wooden shelves For quick and easy identification of thewines stored, you can write on theblackboard-painted surface of the stripson the wooden shelves. You can write directly on the strip or re-move it from the wooden shelf. To doso:  Hold the strip by the sides...

SommelierSet 75 Setting up the SommelierSet The SommelierSet can be used to haveyour wine ready for drinking, straightfrom the wine conditioning unit. You canstore wine glasses and accessories, de-cant your wine, and store open bottlesin the wine conditioning unit. a Large and small box for accessor...

Automatic defrosting 77  WARNING! DANGER of injury and damage!Do not use any mechanical or othertypes of aids which are not recom-mended by the manufacturer to ac-celerate the defrosting process. The wine conditioning unit defrosts au-tomatically.

Cleaning and care 78  WARNING! DANGER of electric shock!Unplug the appliance or trip the cir-cuit breaker.  WARNING! Fire hazard! Do not damage the coolantpipework. Do not let water get into the elec-tronic unit or the lighting. Do not use a steam cleaning appli-ance to clean this wine conditionin...

Cleaning and care 79 Before cleaning the wine con-ditioning unit  Switch the wine conditioning unit offby pressing the On/Off switch.  Take any wine bottles out of the wineconditioning unit and store them in acool place.  Take out all other removable parts forcleaning (see “Storing wine bottles –...

Cleaning and care 80 Appliance front The appliance front has a special high-quality finish (Clean Touch Steel). This isresistant to soiling and is very easy toclean.  Do not use stainless steel cleaning agent on these surfaces, as it will damage the finish. Do not use Miele stainless steelcondition...

Frequently Asked Questions 81 With the help of the following guide minor faults in the performance of the ma-chine, some of which may result from incorrect operation, can be remedied with-out contacting the Service Department. This guide may help you to find the reason for the fault, and how to corr...

Frequently Asked Questions 84 Messages in the display Message Possible cause and solution The warning soundsand the message Close the door appears on the display. The appliance door is open.  Close the appliance door.  If you wish to turn the alarm off early, touch thesensor control OK on the disp...

Frequently Asked Questions 85 The interior lighting is not working. Problem Possible cause and solution The interior lighting isnot working. The wine conditioning unit is not switched on.  Switch the wine conditioning unit on. The Sabbath Mode function is switched on: the tem- perature display is d...

Frequently Asked Questions 86 General problems with the wine conditioning unit Problem Possible cause and solution Bacteria has begun toform on the wine bottlelabels. Bacteria may form on the labels, depending on thetype of label adhesive used.  Clean the wine bottles and remove any adhesiveresidue...

Causes of noises 87 Normalnoises Cause Brrrrr ... A humming noise is made by the motor (compressor). This noisecan get louder for brief periods when the motor switches on. Blub, blub ... A gurgling noise can be heard when the refrigerant circulatesthrough the pipes. Click ... Clicking sounds occur w...

Customer Service 88 Contact in the event of a fault In the event of a fault which you cannotremedy yourself, please contact yourMiele dealer or Miele Customer Service. You can book a Miele Service Call on-line at www.miele.com/service. Contact information for Miele Cus-tomer Service can be found at ...

Declaration of conformity 89 Frequency range 2.412 GHz –2.462 GHz Maximum trans-mitting power < 100 mW

Copyrights and licenses 90 Miele uses their own and third party software which is not subject to any so-calledopen source license for the operation and control of the device/appliance. Thissoftware/these software components are protected by copyright. The copyrightpowers of Miele and third parties h...

9 Independence WayPrinceton, NJ 08540 U.S.A. Miele, Inc. National Headquarters Please have the model and serial numberof your appliance available whencontacting Customer Service. Canada ImporterMiele Limited Headquarters and Miele Centre Customer Service & Support Phone: 888-99-MIELE(64353)[emai...