Miele 11503590 - User Manual

IMPORTANT SAFETY INSTRUCTIONS 6 Appropriate use  This wine conditioning unit is intended for use in domestic house- holds and similar residential environments such as - staff kitchen areas in shops, offices and other working environ- ments - farm houses and by clients in hotels, motels and other re...

IMPORTANT SAFETY INSTRUCTIONS 7 Safety with children  Children near the wine conditioning unit must be supervised. Do not let children play with the wine conditioning unit.  The wine conditioning unit door hinges can cause injury. Keep children away at all times.  Ensure that any packing material...

IMPORTANT SAFETY INSTRUCTIONS 8 Technical safety  The refrigerant circuit has been checked for leaks. The wine con- ditioning unit complies with statutory safety requirements.  This wine conditioning unit contains the coolant Isobutane (R600a), a natural gas which is environmentally friendly. The ...

IMPORTANT SAFETY INSTRUCTIONS 11 Correct use  The wine conditioning unit is designed for use within a specific cli- mate class (room temperature range). Do not use in a climate classfor which it is not designed. A lower room temperature will cause thecompressor to switch off for longer periods, mea...

IMPORTANT SAFETY INSTRUCTIONS 12 Cleaning and maintenance  Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time.  Do not use a steam cleaning appliance to clean this wine condi- tioning unit.The steam could reach electrical components and cause a short ...

IMPORTANT SAFETY INSTRUCTIONS 13 Disposal of your old appliance  Children could become trapped in the machine and could suffo- cate. - Remove the machine doors. - Leave the wooden shelves in the machine so children cannot climb inside.  DANGER of electric shock! - Cut the plug off the power cord. ...

Caring for the environment 14 Disposal of packaging material The packaging is designed to protectthe wine conditioning unit from damageduring transportation. The packagingmaterials used are selected from mate-rials which are environmentally friendlyfor disposal and should be recycled. Ensure that an...

Installation *INSTALLATION* 15 Installation location This appliance should be installed in adry, well-ventilated room. When deciding where to install yourwine conditioning unit, please bear inmind that it will use more energy if in-stalled near to a heater, a range, or an-other appliance that gives ...

Installation *INSTALLATION* 16 Climate class This wine storage unit is designed foruse in climate class SN-T (room tem-perature range). Do not use in a climateclass for which it is not designed. Climate class Room tempera- ture SN 50°F to 90°F/ +10°C to +32°C N 60°F to 90°F/ +16°C to +32°C ST 60°F t...

Installation *INSTALLATION* 17 Installation notes  Risk of damage and injury from the wine conditioning unit tippingover.The wine conditioning unit is veryheavy and can tip forwards when theappliance door is open.Keep the appliance door shut untilthe wine conditioning unit has beeninstalled and sec...

Installation *INSTALLATION* 18 Door hinge  Risk of damage and injury when changing the door hinges.Changing the door hinges single-handedly can cause damage to theappliance and injury.The wine conditioning unit is sup-plied with a fixed hinge. On no ac-count should you attempt to changethe door hin...

Installation *INSTALLATION* 19 If the door hinges of the appliancesare next to each other, you must takeinto account the thickness of thecabinet fronts and door handles sothat the appliance doors do not col-lide and become damaged if they areopened at the same time. The wine conditioning units/refri...

Installation *INSTALLATION* 20 Installation dimensions Position of the electrical connection - The electrical connection must not be positioned higher than 9" (228 mm) above the floor. The electrical socket must not be concealed behind the appliance and must beeasily accessible in an emergency.

Installation *INSTALLATION* 23 Dimensions when the appliance door is open (opening angle 90°/115°) 3/8" (10 mm) A D B C A B* C* D (with a door frontof 3/4" (19 mm)) 26 5/8" (677 mm) Door front (3/4"-1 1/2" (19–38 mm)) Door handle 11 5/8" (296 mm) * The dimensions of the door ...

Installation *INSTALLATION* 24 Dimensions of the cabinet front 23 3/4" (604 mm) 17 3/4" (450 mm) 3" (77 mm) 5 7/8" (149,5 mm) 63 7/8" (1622 mm) 79 7/8" (2029 mm) 10 1/8" (257,5 mm) ≥ 4" – 5 3/16" (≥ 102 – 132 mm)

Installation *INSTALLATION* 25 Installing the wine conditioningunit Before starting... It is essential to read these installa-tion instructions carefully beforestarting to install the wine condition-ing unit.The wine conditioning unit should beinstalled by a suitably qualifiedtradesman in accordance...

Installation *INSTALLATION* 26 Tools required - Cordless drill - TX 20 screwdriver - Hammer drill - Drill bits in various sizes, depending on materials - Hammer - Open-ended wrench - Ratchet wrench, attachment: socket, 5/16" (8 mm) - Adhesive tape - Utility knife - Pipe wrench - Level - Tape mea...

Installation *INSTALLATION* 27 Aligning the installation niche The installation niche must be carefullyaligned using a bubble level before in-stalling the wine conditioning unit. Theniche corners must be at 90° angles toeach other, otherwise the cabinet frontwill not sit straight on all 4 corners of...

Installation *INSTALLATION* 28 Before installation  Before installation, remove any ac-cessories from the back of the appli-ance.  Check the wine conditioning unit fordamage during transportation. Do not install the wine conditioningunit if it is damaged.  Check that all parts at the back of thea...

Installation *INSTALLATION* 29 Preparing the installation niche  Risk of damage and injury from the wine conditioning unit tippingover.The wine conditioning unit is veryheavy and can tip forwards when theappliance door is open.The installation niche must be se-cured to the wall behind it and/orabov...

Installation *INSTALLATION* 30  Danger of injury and damage to the appliance due to the wine condi-tioning unit tipping over.If the anti-tip brackets are fixed toohigh up, they cannot be used to se-cure the wine conditioning unit.The distance between the anti-tipbrackets and the wine conditioningun...

Installation *INSTALLATION* 31 Securing with a wooden wedge  Secure the installation niche to thewall behind it and/or above it as re-quired using the anti-tip brackets  . Pushing the wine conditioning unitinto the niche Then push the wine conditioning unitinto the niche, taking care not todamage ...

Installation *INSTALLATION* 33 Aligning the wine conditioning unit The installation aids  on the appli- ance door provide assistance with thealignment of the wine conditioning unitin the installation niche. The installation aids are suitable for acabinet front thickness of 3/4" or 1 1/2" (1...

Installation *INSTALLATION* 34  Position the supplied spacers  on both sides on the markings next tothe adjustable feet at the front of thewine conditioning unit.  Adjust the rear feet with a ratchet (at-tachment: socket, 8 mm) or a TX 20screwdriver  .

Installation *INSTALLATION* 35  Adjust the front feet with a ratchet (at-tachment: socket, 8 mm) or a TX 20screwdriver   . Tip: Proceed carefully when adjusting the feet, alternating between the leftand right feet.  Place a bubble level across the instal-lation aids  on the appliance door to che...

Installation *INSTALLATION* 36  Risk of damage if the feet are adjusted too much.The rear adjustable feet can be dam-aged.Unscrew the feet only until the marking on the toe-kick is aligned toa maximum of 2 7/16" (62 mm) (max.niche height of 85 3/16" (2,164 mm)).  Check the alignment of the...

Installation *INSTALLATION* 38 Preparing the cabinet fronts  Open the appliance door as far as itwill go.  Unscrew the installation aids  from the appliance door.  Unscrew the angle trims  from both sides of the appliance door and placethe trims and screws to one side –they will be required lat...

Installation *INSTALLATION* 40  Secure the mounting frame  to the top of the cabinet front, using at least6 screws. The mounting frame has several differ-ent types of holes to take account of avariety of cabinet fronts. When securing the frame, alwaysscrew into the strongest part of thecabinet fro...

Installation *INSTALLATION* 43 Mounting the fixing brackets The fixing bracket is used to secure thecabinet front to the bottom of the appli-ance door. Do not mount the fixing brackets untilthe wine conditioning unit (or side-by-side combination, if applicable) hasbeen installed and the cabinet fron...

Installation *INSTALLATION* 44  Tighten the screw at the bottom ofthe appliance door.  Install the cover  over the fixing bracket  .  Click the covers  onto the fixing brackets.

Installation *INSTALLATION* 45 Securing the covers  Before the cover  can be installed in the gap above the wine condition-ing unit, it must be assembled as fol-lows:  Insert the two parts of the cover intoone another. Cover viewed from the side  Place the assembled cover  into the gap above th...

Installation *INSTALLATION* 46  Install the two plastic covers  on both sides of the appliance door byclicking them into the gap betweenthe appliance door and the cabinetdoor, starting at the bottom andworking up to the top.  Secure both sides of the wine condi-tioning unit using at least 3 clips...

Installation *INSTALLATION* 48  Cut the short pieces of door trim forthe top and bottom of the door to thelength required Y.  Fit the door trim into the gap betweenthe cabinet front and the glass. Securing the toe-kick ventilationgrille and toe-kick panel  Click the toe-kick ventilation grille  ...

Installation *INSTALLATION* 49 Limiting the opening angle of the ap-pliance door The door hinges on the wine condition-ing unit are set at the factory to enablethe appliance door to be opened wide. If, for example, the appliance door hitsan adjacent wall when it is opened, youshould limit the openin...

Installation *INSTALLATION* 50 Electrical connection  Risk of electric shock! The wine conditioning unit must onlybe switched on when it has been in-stalled in accordance with the instal-lation instructions.Ground the wine conditioning unit.The wine conditioning unit must notbe grounded via a gas p...

Installation *INSTALLATION* 51 If the outlet is no longer accessible afterinstallation, an additional means of dis-connection must be provided for allpoles. Suitable means of disconnectioninclude switches with an all-pole con-tact gap of at least 1/8" (3 mm). Thesecan be circuit breakers, fuses,...

Saving energy 52 Normal energy consumption Increased energy consumption Installation /Maintenance In a well-ventilated room. In an enclosed, poorly venti-lated room. Protected from direct sun-light. In direct sunlight. Away from heat sources (ra-diator, range/oven). Near a heat source (radiator,oven...

Saving energy 53 Normal energy consumption Increased energy consumption Use Wooden shelves arrangedas they were when the appli-ance was delivered. Only open the door whennecessary and for as short atime as possible. Store winebottles in an organized way. Frequent opening of thedoor for long periods ...

Guide to the appliance 54 a Display b On/Off switch c Wooden shelves with labels d Interior lighting e Isolator plate for thermal separation of the wine conditioning zones f Glass door with UV filter g Automatic door opening (Push2open/Pull2open)

Guide to the appliance 55 Start screen °F 52     1 2 3 4 5 °F  52 °F 52 a Temperature display (target temperature) for the three wine conditioning zones b   sensor For setting the temperature and humidity  c   sensor control For switching the interior lighting on and off when the appliance d...

Guide to the appliance 56 Settings mode   In Settings mode, you can select the following appliance functions and alter theirsettings to some extent: Symbol Function  Language Set  Display Brightness Adjust (darker to brighter) Color Scheme Set (dark or bright)  /  Buzzer Tones Adjust the volume...

Guide to the appliance 57  Factory Default Reset to default settings (see “Selecting additional settings”)  Ambient Lighting Choose between 5 different settings for ambientlighting (see “Selecting additional settings”) Ambient Display Set the appearance of the display when the dooris closed (see “...

Accessories 58 Accessories supplied Appliance plug Chalk Use the chalk supplied to write on themagnetic strips on the wooden shelvesfor easy identification of the wines instorage. Optional accessories A range of useful Miele accessories andcare products are available for yourwine conditioning unit. ...

Before first use 59 Before first use Allow the wine conditioning unit tostand for approx. 1 hour prior to con-necting it to the power supply.This will help prevent any malfunc-tions. Packaging material  Remove all packaging material fromthe inside of the wine conditioningunit. Always remove all pac...

Before first use 60 Operating the wine condition-ing unit The touch display can be scratchedby pointed or sharp objects, e.g.,pens.Only touch the display with your fin-gers. If your fingers are cold, the touchdisplay may not react.   °F   °C  -18 °C  °F 52     °F  52 °F 52 The sensor cont...

Before first use 61 Starting up for the first time  Open the appliance door.  Switch the wine conditioning unit onby pressing the On/Off switch. The On/Off switch is located belowthe display. The wine conditioning unit will start tocool and the interior lighting will comeon when the appliance door...

Switching the wine conditioning unit on and off 62 Switching the wine condition-ing unit on  Open the appliance door.  Switch the wine conditioning unit onby pressing the On/Off switch. The wine conditioning unit will start tocool and the interior lighting will comeon when the appliance door is op...

Selecting additional settings 63 In Settings mode   , you can select dif- ferent wine conditioning unit functionsand alter their settings to some extent,allowing you to adjust the appliance tosuit your requirements. Only the functions in Settings mode   that require further explanation are de-scri...

Selecting additional settings 64 Performing a Self Test    Perform a Self Test if you are concerned that your wine conditioning unit is notworking properly and want to check if itis suffering from any problems.  In Settings mode   , use the   and   sensor controls to select the Self Test and se...

Selecting additional settings 65 Switching on the Door Assis- tant    You can choose between the two DoorAssistants Push2Open and Pull2Open . The default Door Assistant is Push2Open . The Push2Open Door Assistant is suit- able for cabinet fronts without handles.The door will then open automatically...

Selecting additional settings 66 – Adjusting the duration of the Auto-Close function You can also adjust the duration forhow long the appliance door will remainopen until it closes automatically.  In Settings mode   , use the   and   sensor controls to select Door As- sistant and select OK to co...

Selecting additional settings 67 Switching off the Door Assis- tant     In Settings mode   , use the   and   sensor controls to select Door As- sistant and select OK to confirm your selection.  Use the   and   sensor controls to select Mode and select OK to confirm your selection.  Use the ...

Selecting additional settings 68 Availability of the WiFi connection The WiFi connection shares a frequencyrange with other appliances (includingmicrowave ovens and remote controltoys). This can cause sporadic or evencomplete connection failures. There-fore, the availability of featured func-tions c...

Selecting additional settings 70 Deactivating Miele@home  In Settings mode   , use the   and   sensor controls to select the Miele@home and select OK to confirm your selection.  Use the   and   sensor controls to select Deactivate and select OK to confirm your selection. Deactivation successf...

Selecting additional settings 71 Resetting the network configuration Reset the wine conditioning unit’s set-tings to the default settings when dis-posing of your wine conditioning unit,selling it, or putting a used wine condi-tioning unit into operation. This will re-set the network configuration so...

Selecting additional settings 72 Resetting the settings to their default settings   You can reset the wine conditioning unit‘s settings to their default settings. Reset the wine conditioning unit’s settings to the default settings when disposingof your wine conditioning unit, selling it, or putting...

Selecting additional settings 73 The wine conditioning unit‘s settings will be reset to the following values: Function Default settings  Language English  Display Brightness Average value (4 of 7 segments) Color Scheme Dark  /  Buzzer Tones Average value (4 of 7 segments) / Keypad Tone Average v...

Selecting additional settings 74 Switching Sabbath Mode    on or off The wine conditioning unit offers a Sab- bath Mode for the purposes of religious observance. When Sabbath Mode is switched on, you cannot make any settings on yourwine conditioning unit. Ensure that the appliance door isproperly c...

Selecting additional settings 75 Switching Ambient Lighting    on or off The Ambient Lighting can be switched on so your wines are on display even whenthe appliance door is closed. The inte-rior lighting now remains on even whenthe appliance door is closed. Each wine conditioning zone has itsown li...

Selecting additional settings 76  Risk of injury from LED lighting. This lighting corresponds to riskgroup RG 2. If the cover is defective,there is a risk of eye injury.If the lighting cover is defective, donot look from a close range directlyinto the lighting with optical instru-ments (e.g., magni...

The ideal temperature and humidity 77 Wine continues to mature depending onthe surrounding conditions. The lengthof time for which wine can be kept ingood condition will therefore dependnot only on the temperature but also onthe air quality. The wine conditioning unit with its con-stant ideal temper...

The ideal temperature and humidity 78 Isolator panels for thermal separation The wine conditioning unit has twofixed isolator panels that divide the inte-rior into three zones, which can be con-ditioned in different ways. This meansthat you can store up to three differenttypes of wine at the same ti...

The ideal temperature and humidity 79  Risk of damage caused by ex- cess moistureThis will lead to condensation on theinterior walls, which can cause corro-sion damage.Do not introduce additional moisture into the air, e.g., by placing a dish ofwater inside the wine conditioningunit. Increasing the...

Door alarm 80 Door alarm An alarm will sound if the appliancedoor has been left open for longer thanapprox. 2 minutes.The Close the door message also ap- pears on the display. As soon as the door is closed, thealarm will stop and the message on thedisplay will disappear. Turning the door alarm off e...

Storing wine bottles 81 Always observe USDA food safetyguidelines.  WARNING! Fire hazard! Do not operate any electrical equip-ment inside the wine conditioning.This can cause sparking. Vibration and movement have a nega-tive effect on the maturing processwhich can in turn affect the taste of thewin...

Storing wine bottles 82 Wooden shelves The wooden shelves are mounted ontelescopic runners which can be pulledout to make it easier to store and re-move bottles. Moving the wooden shelves The wooden shelves can be removedand replaced again if required.  Pull the wooden shelf out until itstops, then...

Storing wine bottles 83 Labeling the wooden shelves For quick and easy identification of thewines stored, you can write on theblackboard-painted surface of the stripson the wooden shelves. You can write directly on the strip or re-move it from the wooden shelf. To doso:  Hold the strip by the sides...

Automatic defrosting 84  WARNING! DANGER of injury and damage!Do not use any mechanical or othertypes of aids which are not recom-mended by the manufacturer to ac-celerate the defrosting process. The wine conditioning unit defrosts au-tomatically.

Cleaning and care 85  WARNING! DANGER of electric shock!Unplug the appliance or trip the cir-cuit breaker.  WARNING! Fire hazard! Do not damage the coolantpipework. Do not let water get into the elec-tronic unit or the lighting. Do not use a steam cleaning appli-ance to clean this wine conditionin...

Cleaning and care 86 Before cleaning the wine con-ditioning unit  Switch the wine conditioning unit offby pressing the On/Off switch.  Take any wine bottles out of the wineconditioning unit and store them in acool place.  Take out all other removable parts forcleaning (see “Storing wine bottles –...

Cleaning and care 87 Cleaning the door seal  Risk of damage as a result of in- correct cleaning.If you treat the door seal with oils orgrease, it can become porous.Do not use any oils or grease on thedoor seal.  The door seals should be cleanedregularly with clean water, and thenwiped dry with a s...

Frequently Asked Questions 88 With the help of the following guide minor faults in the performance of the ma-chine, some of which may result from incorrect operation, can be remedied with-out contacting the Service Department. This guide may help you to find the reason for the fault, and how to corr...

Frequently Asked Questions 91 Messages in the display Message Possible cause and solution The warning soundsand the message Close the door appears on the display. The appliance door is open.  Close the appliance door.  If you wish to turn the alarm off early, touch thesensor control OK on the disp...

Frequently Asked Questions 92 The interior lighting is not working. Problem Possible cause and solution The interior lighting isnot working. The wine conditioning unit is not switched on.  Switch the wine conditioning unit on. The Sabbath Mode function is switched on: the tem- perature display is d...

Frequently Asked Questions 93 General problems with the wine conditioning unit Problem Possible cause and solution Bacteria has begun toform on the wine bottlelabels. Bacteria may form on the labels, depending on thetype of label adhesive used.  Clean the wine bottles and remove any adhesiveresidue...

Causes of noises 94 Normalnoises Cause Brrrrr ... A humming noise is made by the motor (compressor). This noisecan get louder for brief periods when the motor switches on. Blub, blub ... A gurgling noise can be heard when the refrigerant circulatesthrough the pipes. Click ... Clicking sounds occur w...

Customer Service 95 Contact in the event of a fault In the event of a fault which you cannotremedy yourself, please contact yourMiele dealer or Miele Customer Service. You can book a Miele Service Call on-line at www.miele.com/service. Contact information for Miele Cus-tomer Service can be found at ...

Declaration of conformity 96 Frequency band 2.412 GHz –2.462 GHz Maximum trans-mitting power < 100 mW

Copyrights and licenses 97 Miele uses their own and third party software which is not subject to any so-calledopen source license for the operation and control of the device/appliance. Thissoftware/these software components are protected by copyright. The copyrightpowers of Miele and third parties h...

9 Independence WayPrinceton, NJ 08540Phone:Fax:www.mieleusa.com U.S.A. Miele, Inc. National Headquarters Please have the model and serial numberof your appliance available whencontacting Customer Service. Canada ImporterMiele Limited Headquarters and Miele Centre 800-843-7231609-419-4298 Customer Se...