MicroBoards GX Auto Printer - Manual

• GX Auto Printer Installation 8 GX Auto Printer Installation The GX Auto Printer installation disk includes an Installer that will walk you through the process step by step. Please use the Installer and follow the installation steps in order. The following installation sections are intended only as...

MICROBOARDS TECHNOLOGY, LLC GX AUTO PRINTER 9 Windows Vista Hardware Installation The Microboards GX Auto Printer Installer should always be run when logged in as user with full Administrator rights. This is required for the driver pre-installation to be successful. Once the GX Auto Printer is plugg...

MICROBOARDS TECHNOLOGY, LLC GX AUTO PRINTER 11 Setting Printer Alignment Alignment The GX Auto Printer system has been aligned at the factory. The factory alignment values are on a label on the back of the GX Auto Printer. Follow these steps to enter the factory values: • Click on the Start Button o...

• Using the GX Auto Printer 12 Using the GX Auto Printer Loading Discs The next step is to load your GX Auto Printer with output discs. The system will accept CD or DVD 120 mm (12 cm) inkjet printable discs. If the disc does not have an inkjet printable surface, the ink will not adhere to the surfac...

MICROBOARDS TECHNOLOGY, LLC GX AUTO PRINTER 13 Printing Preferences Access the Printing Preferences by clicking the Start Button on your Windows computer. Select Settings and then select Printers . Right click on the Microboards GX Series icon, then select Printing Preferences . Print Quality Tab Pr...

• Printing Preferences 14 Color Tab Color Space defines the range of colors that can be printed. sRGB/sYCC will be the setting selected unless your image specifically was created using the AdobeRGB standard. Click the Advanced color settings button on the Color tab to access the controls. Advanced C...

MICROBOARDS TECHNOLOGY, LLC GX AUTO PRINTER 15 Ink Tab The Ink Levels show how much remains of all 3 colors, Cyan, Magenta and Yellow. NOTE: If you place a used cartridge in the GX Auto Printer, the ink level may not be reported correctly. If the GX Auto Printer can identify the cartridge, it may re...

• Manual Software Re-Installation 16 Manual Software Re-Installation This section will only apply to a manual re-installation of the SureThing software package. If you have not yet installed the GX Auto Printer using the Installer, it is recommended that you do so. There are 3 methods of reinstallin...

MICROBOARDS TECHNOLOGY, LLC GX AUTO PRINTER 17 Troubleshooting Printer not printing 1. Confirm the GX Auto Printer is plugged into a power source and is turned on. The ON/OFF switch is located at the back of the unit, above the power cable connector. 2. Confirm the green light on the power button is...

• Printing Specifications 18 Printing Specifications Print Speed: Depends upon percentage of coverage and print mode selected: Photo Normal Mode: Approx. 45 seconds for 100% full-color coverage Text & Graphics Best Mode: Approx. 20 seconds for 100% full-color coverage Text & Graphics Normal ...