Meyer Sound X-10 - Manual
Meyer Sound X-10 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – A typical electrostatic loudspeaker’s impulse response
- Page 3 – A typical dynamic loudspeaker’s impulse response; proximity of the dual drivers.
- Page 4 – PHYSICAL DIMENSIONS
X-10 provides an accurate,
detailed and consistently
linear representation of
the input signal.
To achieve the design
goals of the X-10 project,
Meyer Sound engineers
first confronted the
tradeoffs inherent in
high level reproduction of
low frequencies. Recent
trends in large room
monitors have
emphasized dual 15- or
18-inch woofers. However,
when operating above
250Hz, dual woofers
produce destructive comb
filtering effects. But
placing the LF crossover
below 250Hz normally
requires a three- or four-
way system, which in turn
introduces the inevitable
phase distortion
The Meyer Sound X-10
represents a fundamental
redefinition of large format
studio monitors for the
emerging era of high
resolution digital media.
Powerful, yet relatively
compact, the self-powered
X-10 exhibits extremely low
distortion, near-perfect
impulse response and
uniform dispersion across
a wide listening area.
Also, by employing cutting-
edge control technology
adapted from avionics, the
X-10 demonstrates an
extraordinarily linear
response characteristic:
the frequency response
curve does not change
with variations in
monitoring levels. From
the threshold of audibility
up to full output, the
complexities of multiple
crossover points.
In order to achieve
an impulse response
exceeding that of
electrostatics and Meyer's
own patented HD-1 near-
field monitor, Meyer
Sound engineers opted
for a two-way design with
a single LF driver crossing
over at 500Hz. In order
to produce low frequency
output equivalent to dual
woofer designs, Meyer
first developed and
manufactured a new, high
output linear 15-inch
driver. This robust woofer
utilizes a long excursion,
4-inch diameter voice coil
suspended in a high
intensity (1.5 million
Maxwell1) field generated
by dual concentric rings of
Superior
engineering
for the art
and science
of sound.
w w w . m e y e r s o u n d . c o m
•
Self-powered
•
Linear response
•
Extremely low distortion
•
Uniform dispersion with
no comb filtering effects
•
Phase aligned for near-perfect
impulse response
•
Full range output of 136 dB
SPL peak (@ 1 meter)
•
PSAC™ (Pressure Sensing
Active Control - patent pending)
•
Patented HF driver and
wave guide
•
Soffit mount or freestanding
•
RMS™ (Remote Monitoring
System) compatible
•
X-800 subwoofer option for
extended headroom
X-10
High Resolution Linear Control Room Monitor
FEATURES
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
neodymium magnets. It also employs a unique suspension to maintain linear response by holding the voice coil in linear regions of the gap. However, even this exceptionally powerful woofer could not realize the ambitious goals of the X-10 without the highly evolved technology of PSAC (Pressure Sensin...
linearity of the overall system. (Unlike conventional monitors, the X-10 does not simply move into a more non-linear region when presented with peak levels beyond specified capabilities. It remains linear at all times, under all conditions.) Also, because the X-800's dual 18-inch drivers are not tig...
10.25 [260 mm] 15.50 [394 mm] 31.00 [787 mm] To reduce the risk of fire or electric shock ATTENTION: U.K. WARNING: ATENCI”N: ACHTUNG: Turn on 165V~ Turn off 264V~ Turn on 85V~ Turn off 134V~ 1400W RMS MAX 1400W RMS MAX 95-125V ~ 208-235V~ REFER SERVICING TO QUALIFIED PERSONNEL. NO OPERATOR SERVICEAB...
