Maytag 120 V - Manual

Maytag 120 V

Maytag 120 V – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
Page: / 28

Table of Contents:

  • Page 2 – Your safety and the safety of others are very important.; DANGER; Table of Contents
  • Page 3 – Location Requirements; INSTALLATION REQUIREMENTS; Tools and Parts; Tools needed; IMPORTANT SAFETY INSTRUCTIONS
  • Page 4 – Drain System; Standpipe Drain System; Product Dimensions
  • Page 5 – Electrical Requirements; WA RNING; Recommended Ground Method
  • Page 6 – Connect the drain hose; Remove Shipping Strap; INSTALLATION INSTRUCTIONS; WARNING; Connect the Hoses; Connect the inlet hoses to the washer
  • Page 7 – Connect the inlet hoses to the water faucets; Level the Washer; Install the front leveling feet
  • Page 8 – Level the washer; Complete Installation
  • Page 9 – Operating Tips
  • Page 10 – GENERAL USER INFORMATION; MINUTES; PRICE; ELECTRONIC CONTROLS SETUP
  • Page 11 – CONTROL SET-UP PROCEDURES; S P
  • Page 12 – C S
  • Page 13 – EXIT FROM SET-UP MODE
  • Page 15 – Votre sécurité et celle des autres est très importante.; AVERTISSEMENT; SÉCURITÉ DE LA LAVEUSE
  • Page 16 – EXIGENCES D’INSTALLATION; Outillage et pièces; Outils nécessaires; Exigences d’emplacement
  • Page 17 – Système de vidange; Système de vidange avec tuyau de rejet à l'égout; Dimensions du produit
  • Page 18 – Spécifications électriques; A VERTISS; INSTRUCTIONS DE LIAISON À LA TERRE; Méthode recommandée de mise à la terre
  • Page 19 – Connecter le tuyau de vidange; Enlever la sangle d’expédition; INSTRUCTIONS D'INSTALLATION; Raccordement des tuyaux; Connecter les tuyaux d'alimentation à la laveuse
  • Page 20 – Réglage de l'aplomb de la laveuse; Installation des pieds de réglage de l’aplomb avant
  • Page 21 – Réglage de l’aplomb de la laveuse; Tailles de charges complètes classiques; Achever l'installation
  • Page 23 – RÉGLAGE DE LA COMMANDE ÉLECTRONIQUE
  • Page 26 – NOTES
  • Page 27 – GARANTIE DE LA LAVEUSE ET SÉCHEUSE COMMERCIALES
Loading the manual

Write down the model and serial numbers before installing washer.
Both numbers are listed on the model/serial rating plate located
under the lid.
Model # _______________________________
Serial # _______________________________
Date of Purchase _______________________

Prendre note des numéros de modèle et de série avant d'installer
la laveuse.
Les deux numéros sont indiqués sur la plaque signalétique sous
le couvercle.
Numéro de modèle_______________________________
Numéro de série _________________________________
Date d’achat ____________________________________

W10135312B

www.maytagcommerciallaundry.com

INSTALLATION INSTRUCTIONS

COMMERCIAL WASHER

120-volt, 60-Hz Models

INSTRUCTIONS D’INSTALLATION DE LA

LAVEUSE COMMERCIALE

Modèles 120 V, 60 Hz

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Your safety and the safety of others are very important.; DANGER; Table of Contents

2 You can be killed or seriously injured if you don't immediately You can be killed or seriously injured if you don't follow All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed....

Page 3 - Location Requirements; INSTALLATION REQUIREMENTS; Tools and Parts; Tools needed; IMPORTANT SAFETY INSTRUCTIONS

3 Location Requirements IMPORTANT : Do not install or store the washer where it will be exposed to the weather. Do not store or operate the washer intemperatures at or below 32°F (0°C). Some water can remain inthe washer and can cause damage in low temperatures.Proper installation is your responsibi...

Page 4 - Drain System; Standpipe Drain System; Product Dimensions

4 Drain System Standpipe Drain System The standpipe drain requires a minimum diameter standpipe of2" (50 mm). The minimum carry-away capacity can be no lessthan 17 gal. (64 L) per minute.The top of the standpipe must be at least 39" (990 mm) high andno higher than 72" (1.8 m) from the bo...

Other Maytag Models