Master Bilt K - Manual
Master Bilt K – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – TABLE OF CONTENTS; INSTALLATION INSTRUCTIONS............................................................................................... 6; General; CABINET COMPONENT AMP DRAW..........................................................................................11
- Page 4 – INTRODUCTION; case. A parts list is included with this manual. Read all these; STORE CONDITIONS; store. The store temperature should be at or below 75; NOTICE
- Page 5 – WARNING LABELS AND SAFETY INSTRUCTIONS; Severe injury or death will occur if you ignore the message.
- Page 6 – PRE-INSTALLATION INSTRUCTIONS; INSPECTION FOR SHIPPING DAMAGE
- Page 7 – condensate pan from the top unit compartment.
- Page 8 – DOORS; cabinets have Anthony glass doors; Figure 3; Torque Adjustment
- Page 9 – ELECTRONIC REFRIGERATION CONTROL
- Page 10 – HOW TO CHANGE THE SETPOINT; SET; or wait 15s without pressing a key.
- Page 12 – FINAL CHECK LIST
- Page 13 – Disconnect power to the cabinet
- Page 14 – MASTER-BILT PART LIST; Sight Glass
- Page 15 – OWNER RESPONSIBILITY
BLG/
TLG
Series
Bottom Mount Glass Door Merchandisers
2005 “K” Version with Dixell controller
Installation & Operations Manual
Master-Bilt Products
908 Highway 15 North
New Albany, MS 38652
Service Phone: 800-684-8988
PN 303-91000
Rev:8-20-05
Rev:8-23-06
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 TABLE OF CONTENTS INTRODUCTION………………………………….……………………………………………………………………4 STORE CONDITIONS…………………………….……………….…..…………………………………………….. 4 WARNING LABELS AND SAFETY INSTRUCTIONS………..…..……………………………………………… 5 PRE-INSTALLATION INSTRUCTIONS………………………..…..………………………………….…………… 6 Inspection for Shipping Damage…………...
4 INTRODUCTION Thank you for purchasing a Master-Bilt cabinet. This manual contains important instructions for installing, using, and servicing a Master-Bilt BLG/TLG case. A parts list is included with this manual. Read all these documents carefully before installing or servicing your equipment. STO...
5 CAUTION! GROUND REQUIRED FOR SAFE OPERATION WARNING LABELS AND SAFETY INSTRUCTIONS This symbol is the safety-alert symbol. W hen you see this symbol on your cabinet or in this manual, be alert to the potential for personal injury or damage to your equipment. Be sure you understand all safety messa...