Page 3 - CE MARKING
CE MARKING English The SR3001 is in conformity with the EMC directive and low-voltage directive. Français Le SR3001 est conforme à la directive EMC et à la directive sur les basses tensions. Deutsch Das Modell SR3001 entspricht den EMC-Richtlinien und den Richtlinien für Nieders-pannungsgeräte. Nede...
Page 5 - ENGLISH; TABLE OF CONTENTS; EQUIPMENT MAINS WORKING SETTING; — Dramatic and Musical Performers Act 1958; INTRODUCTION; II; PRECAUTIONS; CAUTIONS ON INSTALLATION
1 ENGLISH TABLE OF CONTENTS FOREWORD This section must be read before any connection is made to the mains supply. EQUIPMENT MAINS WORKING SETTING Your Marantz product has been prepared to comply with the household power and safety requirements that exist in your area.SR3001 can be powered by 230V AC...
Page 6 - DESCRIPTION; About Dolby Pro Logic
2 ENGLISH DESCRIPTION DTS was introduced in 1994 to provide 5.1 channels of discrete digital audio into home theater systems.DTS brings you premium quality discrete multichannel digital sound to both movies and music.DTS is a multichannel sound system designed to create full range digital sound repr...
Page 7 - FEATURES; ACCESSORIES; AM Loop Antenna
3 ENGLISH FEATURES The SR3001 incorporates the latest generation of digital surround sound decoding technology such as Dolby Digital EX, Dolby Digital, DTS ES (Discrete 6.1 and Matrix 6.1), DTS Neo:6 (Cinema, Music), Dolby Pro-Logic II x (Movie, Music and Game), Circle Surround II (Cinema and Music)...
Page 8 - FRONT PANEL; q w; • The surround mode is automatically switched to; SPEAKER B
4 ENGLISH FRONT PANEL This feature (Sound Injection) combines a sound from one source with a picture from another.Choose the video source fi rst, and then choose a different audio source to activate this function. r S.(Surround) SPEAKER B button Press this button to activate the Surround Speaker B s...
Page 9 - DIGITAL; AUTO; This indicator illuminates when the; TUNED; This indicator illuminates when; PCM; button on the front panel or the remote.
5 ENGLISH FL DISPLAY DISP AUT O TUNED ST V – OFF NIGHT PEAK ANALOG DIGITAL AT T SLEEP SURR AUTO DIRECT DISC 6.1 MT X 6.1 EQ DIGITAL SURROUND P CM L C R SL S SR LFE SPKR B ¡7 ¡6 f s a ¡5 g j l ¡1 ¡3 d h ¡0 ¡2 ¡4 k ¡8 a DISP (Display Off) indicator This indicator is illuminated when the SR3001 is in t...
Page 10 - REAR PANEL; b n
6 ENGLISH n DIGITAL INPUT (Dig.1 - 3) (coaxial, optical) There are 2 digital inputs with coaxial jacks, 1 with optical jack. The inputs accept digital audio signals from a compact disc, LD, DVD, or other digital source component. m COMPONENT VIDEO INPUT/ OUTPUT If your DVD player or other device has...
Page 11 - Numeric buttons; FUNCTION AND OPERATION; POWER; AMP; button is set CDR function at initial. To; button and press; button and press
7 ENGLISH m Cursor ( 1 , 2 , 3 , 4 ) / OK buttons (when AMP mode is selected) Use these button when operating the SETUP MAIN MENU. , MENU OFF button (when AMP mode is selected) This button is used to exit from the SETUP MAIN MENU. . Numeric buttons 1 to 9 / Surround mode buttons Numeric buttons Thes...
Page 12 - RESETTING THE ALL CODE; SCANNING THE CODE TABLE; CHECKING THE CODE; If a code digit is “0”, the indicator will not blink.; PROGRAMMING THE REMOTE CONTROLLER; PROGRAMMING WITH THE 4-DIGIT CODE; PURE DIRECT button; This button is unavailable for SR3001.; buttons
8 ENGLISH RESETTING THE ALL CODE MENU OSD VOL. TV VOL. MAIN SLEEP MUTE AMP TUNER CD TAPE CDR/MD DVD POWER VCR1 DSS/VCR2 TV AUX1 1. ENTER TUNE/SEARCH TREBLE CHANNEL/SKIP BASS A/D P.SCAN/V-OFF 7.1CH IN STEREO MCH-ST MEMO CLEAR DISPLAY NIGHT CSII EX/ES VIRTUAL DTS PURE DIRECT AUTO 3 2 1 6 5 4 9 8 0 7 T...
Page 13 - OPERATION OF REMOTE CONTROL UNIT; REMOTE CONTROL; Remote-controllable range; LOADING BATTERIES
9 ENGLISH OPERATION OF REMOTE CONTROL UNIT REMOTE CONTROL The distance between the transmitter of the remote control and the IR SENSOR of the SR3001 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of ...
Page 14 - THE CONTRABLE FUNCTION TABLE
10 ENGLISH CH.SEL LIP.SYNC PTY SUB-T/ATT AUDIO INPUT/DISC+ F.DIRECT RDS TUNE/SEARCH T-MODE TREBLE CHANNEL/SKIP BASS A/D P.SCAN/V-OFF 7.1CH IN STEREO MCH-ST MEMO CLEAR DISPLAY NIGHT CSII EX/ES VIRTUAL DTS PURE DIRECT AUTO 3 2 1 6 5 4 9 8 0 7 T.TONE MENU OFF SET UP/ MENU OSD VOL. TV VOL. MAIN SLEEP MU...
Page 15 - CONNECTIONS; SPEAKER PLACEMENT; HEIGHT OF THE SPEAKER UNITS; CONNECTING SPEAKERS; CONNECTING SPEAKER WIRE
11 ENGLISH CONNECTIONS SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, surround back left and right speakers, and a subwoofer.For best results we recommend that all front ...
Page 16 - CONNECTING A SUBWOOFER; CONNECTING AUDIO COMPONENTS; CONNECTING DIGITAL AUDIO COMPONENTS; • There are 3 digital inputs, 2 coaxial jacks and; CD recorder / MD deck
12 ENGLISH Caution: • Be sure to use speakers with the specifi ed impedance as shown on the rear panel of this unit. • To prevent damage to circuitry, do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. • Do not touch the speaker terminals when t...
Page 17 - CONNECTING VIDEO COMPONENTS; There are 3 types of video jacks on the rear panel.
13 ENGLISH IN MONITOR VCR1 R SPEAKER SYSTEMS 6 - 8 OHMS CENTER R FRONT SURROUND BACK S. SPEAKER B SURROUND L L L R DVD OUT IN MONITOR TV DVD VCR1 OUT IN DSS / VCR2 OUT VIDEO IN 1 7.1CH INPUT L SL C SBL SBR SW SR R TV DVD VCR1 OUT IN IN OUT DSS / VCR2 IN OUT CDR/MD TAPE OUT IN CD R L FM (75 Ω ) GND A...
Page 18 - ADVANCED CONNECTING; CONNECTING MULTI CHANNEL AUDIO SOURCE; CONNECTING THE REMOTE CONTROL JACKS; MENU
14 ENGLISH MONITOR VCR1 R SPEAKER SYSTEMS 6 - 8 OHMS CENTER R FRONT SURROUND BACK S. SPEAKER B SURROUND L L L R DVD OUT IN MONITOR TV DVD VCR1 OUT IN DSS / VCR2 OUT VIDEO IN 7.1CH INPUT L SL C SBL SBR SW SR R TV DVD VCR1 OUT IN IN OUT DSS / VCR2 IN OUT CDR/MD TAPE OUT IN CD R L FM (75 Ω ) GND AM ANT...
Page 19 - CONNECTING THE ANTENNA TERMINALS; ASSEMBLING THE AM LOOP ANTENNA; Connecting the supplied FM antenna; CONNECTING AN FM OUTDOOR ANTENNA
15 ENGLISH CONNECTING THE ANTENNA TERMINALS IN OUT MONITOR VCR1 MONITOR R SPEAKER SYSTEMS 6 - 8 OHMS CENTER R FRONT SURROUND BACK S. SPEAKER B SURROUND L L L R DVD OUT IN MONITOR TV DVD VCR1 OUT IN DSS / VCR2 OUT VIDEO IN Y DSS / VCR 2 DVD 3 2 1 7.1CH INPUT L SL C SBL SBR SW SR R TV DVD VCR1 OUT IN ...
Page 20 - S E T U P M E N U; SETUP; SETUP MENU SYSTEM; EXIT; MENU STRUCTURE
16 ENGLISH 1. INPUT SIMPLE SETUP 2. SPEAKER 3. PREFERENCE 5. DOLBY PL II 6. CS II 4. SURROUND CDTAPECD-RTVDVDVCR1DSS SUBWL&RCENTSL&SRSBSB SIZELPF/HPF BASS (Subwoofer)(Front Left & Right)(Center)(Surround Left & Right)(Surround Back)(Surround Back Size)(Low/High Pass Filter) (Bass Mix...
Page 21 - • D1AUTO to D3AUTO : Digital AUTO mode; The relation of the room size and fl oor space; MENU STRUCTURE of Simple Setup; SW
17 ENGLISH 1. INPUT SETUP(ASSIGNABLE DIGITAL INPUT) Four digital inputs can be assigned as the desired source.Use this menu to select the digital input jack to be assigned to the input source.The Input Setup consists of 6 items, which are as below. • D1AUTO to D3AUTO : Digital AUTO mode If the input...
Page 22 - • If “
18 ENGLISH 5. If you fi nish these setup, press the 3 or 4 cursor button to select “TO MAIN MENU” then press the ENTER button to return the SETUP MENU. Or press the 1 or 2 cursor button to select “EXIT” then press the ENTER button to exit the SETUP MENU. Notes: • When a DTS-LD or DTS-CD is playing, ...
Page 24 - • Speakers that you selected “None” for in the Speaker; -3. SPEAKERS LEVEL SETTING WITH TEST TONE; -4. SPEAKERS LEVEL SETTING WITHOUT TEST TONE; MANU
20 ENGLISH 1. When you select “MANUAL” in T-MODE menu by pressing the 1 or 2 button, this unit will emit a pink noise from the front left speaker. At this time, adjust the desired level of the master volume. Remember the level of this noise and then press the 4 button. This unit will emit the pink n...
Page 25 - Surround setting group; • If one of the following modes is selected, all other
21 ENGLISH HT-EQ : Select to active the HT-EQ with the 1 or 2 cursor buttons.The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because fi lm soundtracks were designed to be played back in large movie theater environ...
Page 27 - BASIC OPERATION; Example : AUTO SURROUND; • The volume can be adjusted within the range of –
23 ENGLISH USING THE SLEEP TIMER MENU OSD VOL. TV VOL. MAIN SLEEP MUTE AMP TUNER CD TAPE CDR/MD DVD VCR1 DSS/VCR2 TV ENTER AUX1 To program the SR3001 for automatic standby, press the SLEEP button on the remote. Each press of the button will increase the time before shut down in the following sequenc...
Page 28 - SURROUND MODE; x movie processing before play.; MODE; dts MODE; : This mode is enabled when playing source; CIRCLE SURROUND; mode or
24 ENGLISH SURROUND MODE The SR3001 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played.The available surround modes may be restricted depending on the input signal and speaker setup. AUTO When...
Page 29 - VIRTUAL; • When you use this mode with certain DVD and CD; CAUTION; NOTE for DTS signal
25 ENGLISH VIRTUAL This mode creates a virtualized surround sound experience from a two-speaker (front L and R) playback system playing any multichannel audio source (such as found on DVDs and digital broadcasts), including Dolby Digital, Dolby Pro Logic or DTS. STEREO This mode bypasses all surroun...
Page 30 - Surround fl ag Speakers are full set.
26 ENGLISH The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector on SR3001 or the remote control unit. However, the sound you hear is subject to the relationship between the selected surround mode and input signal. That rel...
Page 31 - DISPLAY MODE; DISPLAY; OTHER FUNCTION; ATTENUATION TO ANALOG INPUT SIGNAL; PEAK; LISTENING THROUGH HEADPHONES; • W h e n u s i n g h e a d p h o n e s , t h e s u r r o u n d m o d e; VIDEO OFF
27 ENGLISH DISPLAY MODE SURROUND AV SURROUND RECEIVER SR3001 R PHONES PURE SETUP DIRECT SIMPLE AUTO HT-EQ MENU ENTER DISPLAY MEMORY EXIT BAND MODE DISP MULTI AUT O TUNED ST V – OFF NIGHT PEAK ANALOG DIGITAL AT T SLEEP SURR AUTO DIRECT DISC 6.1 MT X 6.1 EQ DIGITAL SURROUND A AC P CM L C R SL S SR LFE...
Page 32 - Monitor Outputs; input selector; • If you change the input source during recording, you; RECORDING AN ANALOG SOURCE; INPUT FUNCTION SELECTOR
28 ENGLISH 7.1 CH INPUT The SR3001 is equipped for future expansion through the use of Multi channel SACD multichannel player or DVD-Audio player.When this is selected, the input signals connected to the L(front left), R (front right), CENTER, SL (surround left), SR (surround right) and SBL (surroun...
Page 33 - • When no operation is taken for 5 seconds, the level; MENU STRUCTURE of 7.1CH INPUT LEVEL setup; • In addition, there is no signal at the record outputs
29 ENGLISH 7.1 CH INPUT LEVEL This menu is to adjust the speaker levels for 7.1-channel input sources.Here you will adjust the volume for each channel so that they are all heard by the listener at the same level. DTS PURE DIRECT AUTO T.TONE MENU OFF SET UP/ MENU OSD VOL. TV VOL. MAIN SLEEP MUTE ENTE...
Page 34 - LISTENING TO THE TUNER; AUTO TUNING; MANUAL TUNING; DIRECT FREQUENCY CALL; PRESET MEMORY; AUTO PRESET MEMORY; MANUAL PRESET MEMORY
30 ENGLISH BASIC OPERATION (TUNER) LISTENING TO THE TUNER Frequency scan step for AM is selectable. Default setup is 9 kHz step, if your country’s standard is 10 kHz step, Press TUNER button on the remote more than 6 seconds. Scan step will change. Note: Preset memory for the tuner will clear by cha...
Page 35 - RECALLING A PRESET STATION; PRESET SCAN; CLEARING STORED PRESET STATIONS; To clear all stored preset stations, press and hold the; CLEAR; and the; buttons for two seconds.; SORTING PRESET STATIONS; NAME INPUT OF THE PRESET STATION.; Ten keypad
31 ENGLISH (Using the remote control unit) 1. Tune into the radio station you desire (Refer to the “MANUAL TUNING ” or “AUTO TUNING” section). 2. Press the MEMO button on the remote. “ – – “ (preset number) starts blinking on the display. 3. Enter the desired preset number by pressing the numeric bu...
Page 36 - RDS OPERATION; RADIO TEXT; PTY AUTO SEARCH
32 ENGLISH RDS OPERATION Now in use in many countries, RDS (Radio Data System) is a description of the station’s programming hidden space in the FM signal.Your new receiver is equipped with RDS to assist in the selection of FM stations using station and network names, rather than broadcast frequenci...
Page 37 - Press the; SPKR B; ” will appear on the display.
33 ENGLISH SURROUND SPEAKER B SYSTEM The Surround Speaker B system is a function which allows you to listen to the same source in a room other than the room in which the SR3001 is located.The operations possible with the Surround speaker function are explained briefl y below. ANOTHER ROOM PLAYBACK U...
Page 38 - TROUBLESHOOTING; Are the connections made properly ?
34 ENGLISH TROUBLESHOOTING In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following the user’s guide ? 3. Are the power amplifi ers and speaker working properly ? If the unit does not operate properly,...
Page 39 - GENERAL MALFUNCTION; Memory; HOW TO RESET THE UNIT; mm; DIMENSIONS
35 ENGLISH TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ................................. 87.5 - 108.0 MHz Usable Sensitivity ............................ IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ................... Mono/Stereo 75/70 dB Distortion .........................................
Page 40 - SETUP CODES; CD
SETUP CODES CD Aiwa .................................................................................. 0184Burmester ......................................................................... 0447California Audio Labs ........................................................ 0056Carver ..................
Page 41 - VCR; ii
Broksonic ................................................................ 0263, 0490Candle .............................................................................. 0057Carnivale .......................................................................... 0057Carver ................................
Page 42 - iii; DVD
MTC ........................................................................ 0267, 0027Multitech ........................................................................... 0027NAD .................................................................................. 0085NEC ...............................
Page 43 - is a registered trademark.; Printed in China
www.marantz.com You can find your nearest authorized distributor or dealer on our website. is a registered trademark. 09/2006 00M23CW851310 ecmf-e Printed in China
