Marantz SR6001 - Manuals - manualsarea.com

Page 2 - CAUTION; RISK OF ELECTRIC SHOCK; CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,; WARNING; TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,; TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG; NOTE TO CATV SYSTEM INSTALLER:; IMPORTANT SAFETY; READ BEFORE OPERATING EQUIPMENT

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the us...

Page 3 - D E C L A R AT I O N O F C O N F O R M I T Y; AV Surround Receiver

FIGURE 1 EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. NEC - NATIONAL ELECTRICAL CODE ANTENNALEAD IN WIRE GROUNDCLAMP ANTENNAD...

Page 4 - ENGLISH; TABLE OF CONTENTS; SELECTING ANALOG AUDIO INPUT OR DIGITAL AUDIO

ENGLISH 1 TABLE OF CONTENTS SETUP ..................................................26 ONSCREEN DISPLAY MENU SYSTEM .........................26 1 INPUT SETUP .............................................................28 2 SPKR (SPEAKER) SETUP ..........................................31 ERROR MESS...

Page 5 - DESCRIPTION; XM Satellite Radio Ready; PRECAUTIONS; DO NOT LOCATE IN THE FOLLOWING PLACES; ENTER; A AC

ENGLISH 2 DESCRIPTION DTS was introduced in 1994 to provide 5.1 channels of discrete digital audio into home theater systems.DTS brings you premium quality discrete multichannel digital sound to both movies and music.DTS is a multichannel sound system designed to create full range digital sound repr...

Page 6 - About Dolby Pro Logic

ENGLISH 3 About Dolby Pro Logic II x Dolby Pro Logic II x technology delivers a natural and immersing 7.1-channel listening experience to the home theater environment. A product of Dolby's exper tise in surround sound and matrix decoding technologies, Dolby Pro Logic II x is a complete surround soun...

Page 8 - FEATURES; ACCESSORIES

ENGLISH 5 FEATURES The SR6001 incorporates the latest generation of digital surround sound decoding technology such as Dolby Digital EX, Dolby Digital, DTS ES (Discrete 6.1 and Matrix 6.1), DTS Neo:6 (Cinema, Music), Dolby Pro-Logic II (Movie, Music and Game), Dolby Pro- Logic II x (Movie, Music and...

Page 9 - How to Attach the Front AUX Jack Cover; Front AUX Jack Cover; FRONT PANEL; t y u

ENGLISH 6 r SURROUND MODE button You can select the surround mode by pressing this button. t AUTO (Auto surround) button Press this button to select the AUTO mode from the surround modes. When this mode is selected, t h e r e c e i ve r d e t e r m i n e s t h e s u r r o u n d m o d e corresponding...

Page 10 - FL DISPLAY AND INDICATOR; Opening and closing the front panel door; • Be careful not to pinch your fi ngers between the

ENGLISH 7 FL DISPLAY AND INDICATOR DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ANALOG DIGITAL AT T E Q SLEEP SURR AUTO DISC 6.1 DIRECT MT X 6.1 SPKR A B DIGITAL SURROUND P CM L C R SL S SR LFE ¡6 g s a ¡7 ™0 ™1 ¡8 ¡5 h k ¡0 ¡1 ¡3 f j l ¡2 ¡4 d ¡9 ™2 a DISP (Display Off) indicator This indicator is i...

Page 11 - • In order to avoid potential turn-off thumps, anything; REAR PANEL; See page 23 for connecting information.

ENGLISH 8 u Speaker outputs terminals (SURROUND BACK / MULTI SPEAKER / SPEAKER C) Two terminals are provided for the front left, and right speakers for multi room (2nd zone) or surround back.The terminals can be used to connect a third set of speakers by setting the SPEAKER C selector switch to ON. ...

Page 12 - NIGHT; FUNCTION AND OPERATION; POWER

ENGLISH 9 !9 AUDIO IN/OUT (TV, DVD, VCR, DSS, TAPE, CD/CDR) These are the analog audio inputs and outputs. There are 6 audio inputs and 3 audio outputs. The audio jacks are nominally labeled for cassette tape decks, compact disc players, DVD players and etc.... The audio inputs and outputs require R...

Page 13 - PTY button; AUTO

ENGLISH 10 ⁄3 CONTROL buttons These buttons are used when operating PLAY, STOP, PAUSE and other commands of a source. (When TUNER mode is selected) T.DISP button Used to select the display mode in RDS. PTY button Used to display the programme type information of the current station. F.DIRECT button ...

Page 14 - OPERATION OF REMOTE CONTROL UNIT; REMOTE CONTROL; Remote-controllable range; LOADING BATTERIES; • Do not mix alkaline and manganese batteries.; CAUTIONS ON BATTERIES

ENGLISH 11 OPERATION OF REMOTE CONTROL UNIT REMOTE CONTROL The distance between the transmitter of the remote control and the IR SENSOR of the SR6001 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of...

Page 15 - SOURCE; button. Please refer below for the details in AMP and TUNER mode.; AMP MODE; TUNER MODE

ENGLISH 12 GENERAL INFORMATION OF RC5001SR TO SR6001 To control the SR6001 by your RC5001SR, you have to select the device AMP or TUNER by pressing the SOURCE button. Please refer below for the details in AMP and TUNER mode. AMP MODE CAT P.SCAN CAT T.MODE - T.DISP F.DIRECT PTY TUNING PRESET - + + 1 ...

Page 16 - CONTROLLING MARANTZ COMPONENTS; Press the desired; CONTROLLING A MARANTZ DVD PLAYER (DVD MODE)

ENGLISH 13 CONTROLLING MARANTZ COMPONENTS 1. Press the desired SOURCE button. 2. Press the desired operation buttons to play the selected component. • For details, refer to the component’s user guide.• It may not be possible to operate some models. CONTROLLING A MARANTZ DVD PLAYER (DVD MODE) CONTROL...

Page 17 - CONTROLLING A MARANTZ CD RECORDER (CDR MODE)

ENGLISH 14 CONTROLLING A MARANTZ CD RECORDER (CDR MODE) SOURCE ON / OFF Turns the CD recorder on and offPOWER OFF Turns the CD recorder off POWER ON Turns the CD recorder on 0-9 Inputs the numeric CL Clears the inputting MEMO Programs INFO Scrolls the disc information MENU Switches the display infor...

Page 18 - After this procedure, the selected; button is; BASIC OPERATION; (When operating Marantz AV equipment products)

ENGLISH 15 RESETTING THE CODE 1 2 3 SEND INPUT dts P.DIRECT OFF ON SET AUTO SURROUND SLEEP DISPLAY LEARN LIP SYNC/ l/ SOURCE 1. CAT P.SCAN CAT T.MODE 1 2 3 4 5 6 7 8 9 0 +10 HT-EQ MULTI/ SEND MENU SPKR A/B INFO CH/ INPUT M-SPKR MUTE EX/ES VIRTUAL CS VOLUME dts P.DIRECT OFF ON SET 7.1CH IN STEREO NIG...

Page 19 - LEARN MODE; • This remote control is capable to learn around 60; LEARNING PROCEDURE; • When the SEND indicator blinks once again, the; Erasing the code by SOURCE; Erasing the all SOURCES

ENGLISH 16 LEARN MODE This remote control is capable of learning and storing codes used by other remote controls that you already own.For codes which are not learned, the remote control will transmit either the Marantz preset codes from the initial settings, or remote codes from another manufacturer...

Page 20 - CONNECTIONS; SPEAKER PLACEMENT; HEIGHT OF THE SPEAKER UNITS; • Use magnetically-shielded speakers for front left,; CONNECTING SPEAKERS; CONNECTING SPEAKER WIRE; Twist the bared wire ends tight, to prevent short

ENGLISH 17 CONNECTIONS SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround back left and right speakers, and a subwoofer.For best results we recommend that all fron...

Page 21 - CONNECTING A SUBWOOFER; CONNECTING AUDIO COMPONENTS; CONNECTING DIGITAL AUDIO COMPONENTS; • There are 5 digital inputs, 2 coaxial jacks and; CD recorder / MD deck

ENGLISH 18 Caution: • Be sure to use speakers with the specifi ed impedance as shown on the rear panel of this unit. • To prevent damage to circuitry, do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. • Do not touch the speaker terminals when t...

Page 22 - HDMI JACK; DVD player; INPUT SETUP; SATELLITE TUNER

ENGLISH 19 HDMI JACK This SR6001 has two HDMI inputs and one HDMI output. The unit can send digital video and audio signals from DVDs and other sources directly to a display. It minimizes signal degradation caused by analog conversion so that high quality images can be enjoyed. The SR6001 is also ca...

Page 23 - CONNECTING VIDEO COMPONENTS; There are 3 types of video jacks on the rear panel.

ENGLISH 20 FM (75) GND AM DC OUT OUTPUT COMPONENT VIDEO IN OUT PREOUT SL L R SR FLASHER IN INPUT 1(DVD) COAX. DIGITAL IN DIGITAL OUT 3 5 4 2 1 SURROUND BACK OUT R OUT L RS-232C OUTPUT TAPE CD/CD-R OUT OUT IN MULTI R L DSS (AUX2) AUDIO TV 7.1CH IN IN OPT. DVD(2) DSS(4) TV(1) VIDEO OUT VCR(3) OUT IN R...

Page 24 - ADVANCED CONNECTING; CONNECTING MULTI CHANNEL AUDIO SOURCE; CONNECTING THE REMOTE CONTROL JACKS; MULTI; • Be sure to set to “IR=ENABLE” when external

ENGLISH 21 DC OUT OUTPUT IN OUT PREOUT SL L R SR FLASHER IN OUT L OUTPUT E CD/CD-R OUT OUT MULTI R (AUX2) O 7.1CH IN T UT 1(TV) INPUT 4(DSS) N SR IN UT 3(VCR) SL C B / P B C R / P R C R / P R C R / P R C B / P B C B / P B Y Y DVD(2) DSS(4) VCR(3) TV(1) MONI. OUT SBR SBL SBR SBL C SW SW C AC INPUT 2(...

Page 25 - CONNECTING THE ANTENNA TERMINALS; ASSEMBLING THE AM LOOP ANTENNA; Connecting the supplied FM antenna; CONNECTING AN FM OUTDOOR ANTENNA

ENGLISH 22 CONNECTING THE ANTENNA TERMINALS FM (75) GND AM DC OUT OUTPUT COMPONENT VIDEO IN OUT PREOUT SL L R SR FLASHER IN SPEAKERSYSTEMS INPUT 1(DVD) COAX. DIGITAL IN DIGITAL OUT 3 5 4 2 1 SURROUND BACK OUT R OUT L RS-232C OUTPUT TAPE CD/CD-R OUT OUT IN MULTI R L DSS (AUX2) AUDIO TV 7.1CH IN IN OP...

Page 26 - XM RADIO OVERVIEW; Introducing XM Satellite Radio; CONNECTING THE XM CONNECT-AND-PLAY ANTENNA; Note

ENGLISH 23 XM RADIO OVERVIEW SR6001 is the XM Ready ® receiver. You can receive XM Satellite Radio ® by connecting to the XM Mini-Tuner and Home Dock (sold separately) and subscribing the XM service. Introducing XM Satellite Radio There’s a world of audio listening pleasure beyond AM and FM. XM Sate...

Page 27 - CONNECTING FOR THE MULTI ROOM; • You can use surround back speaker terminals as; CONNECTING FOR SPEAKER C USE; • If incorrectly connected, a protective circuit in the

ENGLISH 24 FM (75) GND AM DC OUT OUTPUT COMPONENT VIDEO IN OUT PREOUT SL L R SR FLASHER IN SPEAKERSYSTEMS INPUT 1(DVD) COAX. DIGITAL IN DIGITAL OUT 3 5 4 2 1 SURROUND BACK OUT R OUT L RS-232C OUTPUT TAPE CD/CD-R OUT OUT IN MULTI R L DSS (AUX2) AUDIO TV 7.1CH IN IN OPT. DVD(2) DSS(4) TV(1) VIDEO OUT ...

Page 28 - FLASHER IN; CONNECTING OTHER EQUIPMENT

ENGLISH 25 a RS232C Connect an external control device or other device for servicing. (Use a straight cable for the connection.) s DC OUT (DC TRIGGER) External devices can be controlled from the SR6001 by connecting them to the DC OUT terminal (12 V). d FLASHER IN This receiver can be controlled by ...

Page 29 - SETUP; ONSCREEN DISPLAY MENU SYSTEM; UNLOCKED; SR6001 FRONT BUTTON CONTROL

ENGLISH 26 SETUP After all components are connected, initial setup must be performed. ONSCREEN DISPLAY MENU SYSTEM The SR6001 incorporates an onscreen menu system, which makes various operations possible by using the cursor ( 3 , 4 , 1 , 2 ) and ENTER buttons on the remote control unit or on the fro...

Page 30 - • After you complete this portion of the setup, move; RETURN; ” with the; MAIN MENU

ENGLISH 27 Note: • After you complete this portion of the setup, move cursor to “ RETURN ” with the 3 , 4 , 1 and 2 cursor buttons and press the ENTER button. M A I N M E N U 1 . I N P U T S E T U P 2 . S P K R S E T U P3 . S U R R S E T U P L O C K E D4 . V I D E O S E T U P5 . P R E F E R E N C E ...

Page 31 - INPUT SETUP; • FUNC INPUT SETUP :

ENGLISH 28 1 INPUT SETUP This menu is for setting the matching the output of connected audio devices and the input jacks of this receiver. • FUNC INPUT SETUP : “1-1 FUNC INPUT SETUP” (see page 29) • 7.1 CH INPUT SETUP : “1-2 7.1 CH INPUT SETUP” (see page 29) • FUNC RENAME : “1-3 FUNCTION RENAME” (se...

Page 32 - MODE; LAST

ENGLISH 29 1-1 FUNC INPUT SETUP (ASSIGNABLE DIGITAL INPUT) The 5 and F (Front) digital inputs can be assigned to a desired source.HDMI and COMPONENT inputs can be assigned to the preferred source.Use this menu to select which digital input jacks are to be assigned to which input source. 1. S e l e c...

Page 33 - • RENAME cannot be left blank.

ENGLISH 30 1-3 FUNCTION RENAME Input sources can be registered under any name. This menu is for renaming input source.This menu is for renaming function name. Names can be up to 10 characters long, including spaces. (Characters are selected from those appearing on the display.) This name appears on ...

Page 34 - • AUTO SETUP; • After you complete this the portion of the setup,; button. The cursor will move to; ” and press the; button to go to

ENGLISH 31 2 SPKR (SPEAKER) SETUP After you have installed the SR6001 connected all the components and determined the speaker layout, it is now time to perform the settings in the Speaker Setup menu for the optimum sound acoustics for your environment and speaker layout.Before you perfor m the follo...

Page 35 - HOW TO PERFORM AUTO SETUP

ENGLISH 32 5. Detection Check During the detection check, the following OSD appears on the display and checks are made to detect dark sound in the listening room, whether there are speakers or not and polarity. A U T O S E T U P S P E A K E R S C H E C K : - - N O W A N A L Y Z I N G ! ! C A N C E L...

Page 36 - • Less than 6 positions can be measured, but it is; • Do not turn the power to the SR6001 off while

ENGLISH 33 8. 8. Move the microphone to the second listening position, select “ START ” with the 3 / 4 cursor bu t t o n s a n d p r e s s t h e E N T E R bu t t o n t o measure the second point. At this point, you can cancel second point measurement and calculate measurement results by selecting “ ...

Page 37 - ERROR MESSAGES; Displayed Error

ENGLISH 34 ERROR MESSAGES Displayed Error Cause How to Remedy MIC SET ERROR!! A U T O S E T U P A U T O S E T U P : S T A R T M A I N R O O M S U R R B A C K : 2 C H M I C S E T E R R O R ! ! R E T U R N E X I T • The microphone is not properly connected. • Connect the included microphone. • Check t...

Page 38 - SUB W; LARGE; CENTER; BASS MIX; NONE

ENGLISH 35 2-2 MANUAL SETUP 1. Select “ 2. SPKR SETUP ” from the MAIN MENU. 2. Select “ MANUAL SETUP ” with the 3 or 4 cursor buttons. 3. P r e s s th e E N T E R b u t t o n t o e n t e r t h e selection. <SPEAKER SIZE> S P E A K E R S I Z E I N I . S E T S P K R : Y E S S U B W : Y E S F R O...

Page 40 - SURROUND SETUP; CHANNEL LEVEL

ENGLISH 37 3 SURROUND SETUP This menu is for setting surround effect parameters for the various surround input signals so as to bring out the live audio effect of your speaker system. • CHANNEL LEVEL: “3-1 CHANNEL LEVEL” (see page 37) • PL II x MUSIC PARAMETER: “3-2 PL II x MUSIC PARAMETER” (see pag...

Page 41 - PARAMETER

ENGLISH 38 SUB W LEVEL: Set the effect level of the subwoofer speaker between –18 and +12 level in 0.5 level interval . • If “ NONE ” was selected for the subwoofer speaker setting in the SPEAKER SIZE, then this setting will not appear. Note: • Setting to a mode other than multichannel stereo or CSI...

Page 42 - VIDEO SETUP; • OSD information is not output to Monitor Output; • For details on video convert feature, see page 45.

ENGLISH 39 4 VIDEO SETUP Video settings are made as follows. 1. Select “4. VIDEO SETUP” from the MAIN MENU with the 3 / 4 cursor buttons and press the ENTER button. 4 . V I D E O S E T U P V I D E O C O N V E R T T V . A U T O : D I S A B L EO S D I N F O : E N A B L EI / P C O N V E R T : E N A B L...

Page 43 - PREFERENCE

ENGLISH 40 5 PREFERENCE • MULTI ROOM SETUP : “5-1 MULTI ROOM SETUP” (see page 41) • DC TRIGGER SETUP : “5-2 DC TRIGGER SETUP” (see page 41) 1. Select “ 5. PREFERENCE ” from MAIN MENU with the 3 or 4 cursor buttons and press the ENTER button. 5 . P R E F E R E N C E M U L T I R O O M S E T U P D C T ...

Page 44 - -1 MULTI ROOM SETUP; -2 DC TRIGGER SETUP

ENGLISH 41 5-1 MULTI ROOM SETUP The SR6001 has source selectors, sleep timers and multispeaker output remote control units for the other rooms in the multi room system. These features can be set from this menu. 1. Select “5. PREFERENCE” from the MAIN MENU with the 3 or 4 cursor buttons and press the...

Page 45 - ACOUSTIC EQ; • “AUDYSSEY”, “FRONT” and “FLAT” can be

ENGLISH 42 6 ACOUSTIC EQ This display is for setting up the equalizer and changing the Equalizer mode. • PRESET G. EQ ADJ : “6-1 PRESET G. EQ ADJ” (see page 43) • CHECK AUTO : “6-2 CHECK AUTO” (see page 43) EQ MODE: There are 4 equalizer modes to choose from: PRESET G. EQ that allows the user to man...

Page 46 - • The frequency will not be exactly the same as in the

ENGLISH 43 6-2 CHECK AUTO These menus are for confir ming the results of AUTO SETUP function equalizer measurement (AUDYSSEY, FRONT, FLAT). 1. Select “ 6. ACOUSTIC EQ ” from MAIN MENU with the 3 or 4 cursor buttons and press the ENTER button. 2. Select “ CHECK AUTO ” with the 3 or 4 cursor buttons. ...

Page 47 - ADJUSTING THE MAIN VOLUME; NIGHT MODE; Example: AUTO SURROUND; SELECTING AN INPUT SOURCE

44 ENGLISH ADJUSTING THE MAIN VOLUME DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO VOLUME UP DOWN MultEQ A/B T-MODE MEMORY CLEAR DISPLAY EXIT SPEAKERS BAND MIC L C R SL S SR LFE DIGITAL SURROUND GHT EAK ANALOG DIGITAL AT T EQ P CM A AC READY CAT CAT 0 +10 HT-EQ MULTI/ MENU SPKR A/B ENTER INFO CH/ M-SP...

Page 48 - TEMPORARILY TURNING OFF THE SOUND; MUTE; USING THE SLEEP TIMER; SLEEP; SLEEP; VIDEO CONVERT; ANALOG VIDEO CONVERSION; Notes of OSD menu system:

45 ENGLISH TEMPORARILY TURNING OFF THE SOUND CAT CAT 0 +10 HT-EQ MULTI/ MENU SPKR A/B ENTER INFO CH/ M-SPKR VOLUME 7.1CH IN A/D MEMO CL MUTE MUTE To temporarily silence all speaker outputs such as when interrupted by a phone call, press the MUTE button on the remote. This will interrupt the output t...

Page 49 - Dolby Pro Logic; dts; SURROUND MODE; x movie processing before play.

46 ENGLISH 2 MODE (Dolby Digital, Pro Logic II x MOVIE, Pro Logic II x MUSIC, Pro Logic II x GAME) This mode is used with source materials encoded in Dolby Digital and Dolby Surround. DOLBY DIGITAL This mode is enabled when playing source materials encoded in Dolby Digital.Playing multichannel-encod...

Page 50 - • The Neo:6 mode is available for 2 channel input; CIRCLE SURROUND; Dolby Virtual Speaker; Notes for DTS

47 ENGLISH Neo:6 Cinema, Neo:6 Music This mode decodes 2 channel signals into 6 channel signals using high-accuracy digital matrix technology.The DTS Neo:6 decoder has near-discrete properties in the frequency characteristics of the channels as well as in channel separation.According to the signals ...

Page 52 - with Dolby Surround are fully equipped.

49 ENGLISH Surround Mode Input Signal Decoding Output Channel Front information display L/R C SL SR SBL SBR SubW Signal format indicators Channel status Dolby Virtual Speaker Dolby Surr.EX Dolby Virtual Speaker O - - - - 2 DIGITAL EX L, C, R, SL, SR, S, LFE Dolby D (5.1ch) Dolby Virtual Speaker O - ...

Page 53 - OTHER FUNCTION; TV AUTO ON/OFF FUNCTION; AUTO POWER ON; ATTENUATION TO ANALOG INPUT SIGNAL; LISTENING THROUGH HEADPHONES; DOLBY HEADPHONE MODE

50 ENGLISH OTHER FUNCTION TV AUTO ON/OFF FUNCTION This function allows the component connected to the TV-VIDEO in jack to control the power (ON/OFF) to the SR6001. AUTO POWER ON 1. Be sure the TV auto mode is ENABLED. (Refer to page 39: PREFERENCE) 2. Connect your TV TUNER (etc) to the TV- VIDEO in ...

Page 54 - RECORDING AN ANALOG SOURCE; DISPLAY MODE; • Only the DISP indicator will be illuminated on the

51 ENGLISH RECORDING AN ANALOG SOURCE In nor mal operation, the audio or video source selected for listening through the SR6001 is sent to the record outputs.This means that any program you are watching or listening to may be recorded simply by placing machines connected to the outputs for TAPE OUT ...

Page 55 - Monitor Outputs; MAIN VOLUME; • In addition, there is no signal at the record outputs; AUX2 INPUT; LIP SYNC

52 ENGLISH 7.1 CH INPUT The SR6001 is equipped for future expansion through the use of Multi channel Super Audio CD multichannel player or DVD-Audio player.When this is selected, the input signals connected to the L(front left), R (front right), CENTER, SL (surround left), SR (surround right) and SB...

Page 56 - LISTENING TO THE TUNER; • Preset memory for the tuner will clear by changing; AUTO TUNING; MANUAL TUNING; DIRECT FREQUENCY CALL

53 ENGLISH (FM) TUNING MODE (AUTO STEREO OR MONO) DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO VOLUME UP DOWN MultEQ R A/B T-MODE MEMORY CLEAR DISPLAY EXIT SPEAKERS BAND MIC L C R SL S SR LFE DIGITAL SURROUND V-OFF NIGHT PEAK ANALOG DIGITAL AT T 6.1 EQ P CM A AC R P.SCAN T.MODE 1 2 3 4 5 6 7 8 9 +10 ...

Page 57 - PRESET CHANNEL LIST DISPLAY; MANUAL PRESET MEMORY; PRESET MEMORY; AUTO PRESET MEMORY

54 ENGLISH PRESET CHANNEL LIST DISPLAY A complete list of the broadcast channels stored in this unit can be displayed. CAT MULTI/ MENU ENTER EXIT INFO T.TONE/SET UP M-SPKR 2.4. TAPE REMOTE CONTROLLER RC5001SR MD CDR CD DVD AMP AUX2 VCR TUNER DSS TV BASS TREBLE AUX1 1. 1. Press the TUNER button on th...

Page 58 - NAME INPUT OF THE PRESET STATION.; SORTING PRESET STATIONS; CLEARING STORED PRESET STATIONS; • To clear all stored preset stations, press and hold the; CLEAR; and the; buttons for two seconds.; Ten keypad

55 ENGLISH NAME INPUT OF THE PRESET STATION. This function allows the name of each preset channel to be entered using alphanumeric characters. Before name inputting, you need to store preset stations with the preset memory operation. DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO VOLUME UP DOWN STANDBY...

Page 59 - LISTENING TO XM SATELLITE RADIO; X M O O O R A D I O I D; • If “; ” appears in the front panel display,; Artist name/Song title; X M O 4 0 : D e e p T r c

56 ENGLISH LISTENING TO XM SATELLITE RADIO SELECTING AN INPUT SOURCE Before you can listen to XM Satellite Radio, you must fi rst select the input source on the SR6001. P.SCAN T.MODE +10 HT-EQ INPUT EX/ES VIRTUAL CS dts P.DIRECT l/ OFF ON SET 7.1CH IN STEREO NIGHT M-CH ST AUTO SURROUND SLEEP DISPLAY...

Page 60 - P i n k F l o i d /; • To change the display content from XM information; • If the information contains a character that cannot; SEARCH MODE; ALL CHANNEL SEARCH MODE; PRESET SEARCH MODE

57 ENGLISH When the Artist name/Song title is displayed: N A M E / T I T L E P i n k F l o i d / F l o i d / M o n e y The “NAME/TITLE” is displayed for 2 seconds, followed by the artist’s name and song title.(If artist’s name or song title is more than 13 characters long, the text is scrolled.) Not...

Page 61 - CATEGORY SEARCH MODE; CHANNEL DIRECT CALL; CHECKING THE XM PRESET CHANNEL

58 ENGLISH CATEGORY SEARCH MODE You can select the desired channel from the category allocated to each channel.Category being aired can be only selected. CAT 0 +10 MULTI/ MENU S PKR A/B INFO M- S PKR MUTE VOLUME MEMO CL CAT CAT CH/ CH/ 2. 3 . - TUNING PRE S ET - + + REMOTE CONTROLLER RC5001 S R TAPE...

Page 62 - PRESET SCAN; • To clear all stored preset stations, press and hold; buttons for two

59 ENGLISH PRESET SCAN CAT T.MODE 4 5 6 7 8 9 0 +10 HT-EQ MULTI/ S PKR A/B M- S PKR MUTE EX/E S VIRTUAL C S VOLUME 7.1CH IN S TEREO NIGHT M-CH S T A/D MEMO CL CAT CAT CH/ CH/ P. S CAN 2. 5 - TUNING PRE S ET - + + REMOTE CONTROLLER RC5001 S R TAPE BA SS TREBLE AUDIO ANGLE S UB TITLE DI S C+ CH- S EL ...

Page 63 - Notes for Multi Room Speaker

60 ENGLISH MULTI ROOM SYSTEM The Multiroom System mode allows the same source or different sources to be heard in two rooms other than where this receiver is installed. When using the multiroom system, the audio is output from the MULTI AUDIO output terminals and input to the MULTI ROOM amps. If a s...

Page 64 - Notes for the Multi Room System

61 ENGLISH OPERATION OF THE MULTI ROOM OUTPUTS WITH THE REMOTE CONTROL FROM MULTI ROOM Multi Room output can be operated from a room where the receiver is not installed. This requires a separately sold IR receiver. (For connections, see page 24.) CAT +10 0 0 CAT CAT MULTI/ MENU SPKR A/B ENTER INFO T...

Page 65 - TROUBLESHOOTING; Are the connections made properly ?

62 ENGLISH TROUBLESHOOTING In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following the user’s guide ? 3. Are the power amplifi ers and speaker working properly ? If the unit does not operate properly,...

Page 66 - HDMI; SYMPTOM

63 ENGLISH HDMI SYMPTOM CAUSE REMEDY T h e d i s p l ay d o e s n o t a p p e a r ove r a n H D M I connection. The connected monitor or projector does not support HDCP. The HDMI input of on the TV is not on. Set HDMI input so that it tur ns on, as explained in the TV's instruction manual. The HDMI ...

Page 67 - DIMENSIONS; GENERAL MALFUNCTION; Memory; HOW TO RESET THE UNIT

64 ENGLISH DIMENSIONS DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO VOLUME UP DOWN STANDBY PHONES INPUT SELECTOR AV SURROUND RECEIVER SR6001 MultEQ ENTER HT-EQ PURE DIRECT THX 7.1CH INPUT MODE AUTO MULTI A/B T-MODE MEMORY CLEAR DISPLAY EXIT SPEAKERS BAND MIC PURE DIRECT SURROUND SPEAKER MULTI DSD POWE...

Page 68 - SETUP CODES; TV

SETUP CODES TV Acer .......................................................... 1141Admiral .................................1002, 1009, 1089Aiko .......................................................... 1059Aiwa ................................................ 1117, 1118Akai ..........................

Page 69 - ii

Dimensia ..............................3004, 3063, 3085Dixon .............................................. 3077, 3081Dynatech .................................................. 3035Electrohome ............................................. 3052Electrophonic .............................................

Page 70 - iii

Hughes ........................................... 4001, 4016Janeil ........................................................ 4025JVC ........................................................... 4017Mitsubishi ................................................. 4001Panasonic ...............................

Page 71 - a re; Printed in China

www.marantz.com Yo u ca n fi n d yo u r n eare s t a u thorized di s trib u tor or dealer o n o u r web s ite. i s a re g i s tered trademark. 12/2006 00M25CW851250 mzh-d Printed in China SR6001U DFU̲5̲Setup.indd iv SR6001U DFU̲5̲Setup.indd iv 06.12.21 4:22:29 PM 06.12.21 4:22:29 PM