Marantz DV3001e - Manual

5 E n g l i s h Connection to TV and Audio players IMPORTANT! Ensure that ALL equipment to be connected is SWITCHED OFF before proceeding, especially by using HDMI or YUV connection. We also recommend that you consult with the connecting instructions of any equipment to be connected before you pro- ...

6 A B Audio connections Connection to a TV via HDMI A This player supports the full digital connection HDMI ( High Definition Multimedia Interface). When the player is connected via HDMI to the TV set you can experience best digital video and audio quality with one single wire. For the correct repro...

7 E n g l i s h Digital audio connections Connecting to a decoder with Dolby Digital processing or MPEG processing A When DVDs recorded in Dolby Digital or MPEG audio are played, Dolby Digital bitstream or MPEG audio bitstream is sent to the player’s OPTICAL digital audio output connector or COAXIAL...

8 Remote control preparation Battery installation A Insert the batteries while observing the correct (+) and (-) polari- ties as illustrated. Service life of batteries The batteries normally last for about one year although this depends on how often and for what operations the remote con- trol is us...

9 E n g l i s h Basic operation Preparations Switch on the TV and select “Video” as the input source. Switch on the stereo system if the player has been connected to a stereo audio amplifier. Basic play 1. Press POWER ON button on the main unit to switch on the power. 2. Press OPEN/CLOSE by the main...

10 Playing Audio CD’s Press the Power button then the OPEN/CLOSE button to open the CD drawer. Place the audio CD on the tray with the label facing up. Press the OPEN/CLOSE button once again to close the CD drawer. The player will read the disc contents and automatically play. To view the CD informa...

15 E n g l i s h Initial settings Once the initial setting have been set, the player will always oper- ate with the same parameters. The setting will be retained in the memory even after switching off the power. Initial settings must be in the setup mode, but function can be set in all mode. Using t...

16 AUDIO SETUP Speaker Setup ( picture 6 ) Press UP/DOWN CURSOR to select the items in the Speaker Setup DOWNMIX (picture 7) LT/RT or STEREO: If you connect only two speakers, you should choose these. 5.1CH: When you play a disc with Dolby Digital, you should choose this best. When you select it, th...

20 Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Troubleshooting Symptom (Common) No power Play fails to start even...

22 Definition of terms Angle Recorded onto some DVD discs are scenes, which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.). With such discs, the ANGLE button can be used to view the scene from dif...