Makita MAC5200 - Manual
This user manual provides a comprehensive guide for Makita’s oil-lubricated air compressors (models MAC700, MAC2400, MAC5200), covering everything from safety protocols and operational requirements to maintenance schedules and troubleshooting common issues. The document emphasizes critical safety measures–such as proper grounding, pressure limits, and hazard prevention–to ensure safe use, while also detailing technical specifications like horsepower ratings, voltage compatibility, and recommended oil viscosity for different climates. Maintenance routines include regular inspections of filters, valves, and air tanks to prevent malfunctions, alongside troubleshooting steps for problems like pressure drops or motor failures.
Table of Contents:
- Page 1 – Product Specifications and Circuit Requirements
- Page 2 – Table of Contents
- Page 3 – Critical Safety Instructions
- Page 4 – Air Tank and Attachment Safety Hazards
- Page 5 – Hazards: Electric Shock, Fire, and Breathing Risks
- Page 6 – Operational Safety Hazards
- Page 7 – Definitions, Guidelines, and Inspection Procedures
- Page 8 – Component Functions and Storage Procedures
- Page 9 – Component Operation and Installation Procedures
- Page 10 – Installation and Initial Start-up Procedures
- Page 11 – Piping Installation and Daily Checklist
- Page 12 – Safe Shutdown and Maintenance Procedures
- Page 13 – Routine Maintenance Schedule and Oil Management
- Page 14 – Service and Motor Troubleshooting
- Page 15 – Troubleshooting Air Leaks and Pressure Issues
- Page 16 – Motor and Supply System Troubleshooting
- Page 17 – Motor and Regulator Fault Diagnosis
- Page 18 – Service Information and Registration Details
- Page 19 – Health Risks from Dust Exposure
- Page 20 – Warranty Policy
- Page 21 – Customer Feedback Form
MAC700 - 02/04
OWNERS MANUAL FOR
Oil Lubricated Air Compressor
MODEL NO.
MAC700 | MAC2400 | MAC5200
Model No.
MAC700
MAC2400
MAC5200
Horsepower
2
2.5
3
SCFM @ 40 PSIG
3.8
4.8
6.9
SCFM @ 90 PSIG
3.3
4.2
6.5
Cut-In Pressure
100 PSI
100 PSI
110 PSI
Cut-Out Pressure
130 PSI
130 PSI
140 PSI
Bore
4 7 m m
51 mm
47 mm
Stroke
44
mm
4 4
mm
4 4
mm
Voltage -Single Phase
120
120
120
Motor RPM
1720
1720
3420
Amperage @ max pressure
12.4
12.3
13.8
Tank Size
2.6 Gallon
4.2 Gallon
5.2 Gallon
CSA/US Listed
Yes
Yes
Yes
SPECIFICATION CHART
Minimum Circuit Requirement: 15 AMPS
*
A circuit breaker is preferred. Use only a fuse or circuit breaker that is the same rating
as the branch circuit the air compressor is operated on. If the air compressor is
connected to a circuit protected by fuses, use time delay fuses.
IMPORTANT:
Read the Safety Guidelines and ALL
instructions carefully before operating.
www.makitatools.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Makita
- Model
- MAC5200
- Document type
- Manual
- Category
- Compressor
- Language(s)
- English
- Pages
- 22
- File size
- 182.5 KB
- Format
Other Manuals for Makita MAC5200
Summary
Lists technical specifications for various air compressor models including horsepower, flow rates, pressure settings, dimensions, and minimum circuit requirements.
Lists the main sections of the owner's manual, including safety instructions, operation procedures, maintenance, troubleshooting, and warranty details.
Outlines essential safety guidelines emphasizing that understanding warnings is necessary to prevent serious injury or property damage during operation and maintenance.
