Makita LB1200F - Manual

Makita LB1200F

Makita LB1200F – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 3 – SAVE THESE INSTRUCTIONS.
  • Page 5 – INSTALATION; Securing the band saw stand; • After attaching the stand, attach the handle and tires.
  • Page 6 – How to load dust box
  • Page 7 – Installing the guide rail
  • Page 8 – FUNCTIONAL DESCRIPTION; Switch action; • Before operation, make sure that the tool is turned on and off.; Lighting up the lamps
  • Page 10 – ASSEMBLY; Changing the band saw blade; cause a personal injury.
  • Page 12 – Close the lower cover.
  • Page 13 – Tensioning the Band saw Blade; adjustment in dependence on the band saw blade width.; Aligning the band saw blade; the saw
  • Page 14 – With the quick release lever the saw blade tension is released.; Upper blade guide adjustment
  • Page 15 – mm from bottom of blade.
  • Page 16 – Align the lower blade guide; to a position of 1 or 2 mm from bottom of individual blade.; Adjusting the thrust bearing; to adjust the table, and tighten the lock lever again.
  • Page 17 – Operation; against the saw blade from the side.
  • Page 19 – How to move machine; • Do not use guarding for handling or transportation.; MAINTENANCE; perform inspection or maintenance.; Cleaning; ACCESSORIES
  • Page 20 – Makita Corporation
Loading the manual

EN
GL
ISH

(Origina

l Ins

truction Manua

l)

Band Saw

LB1200F

INSTRUCTION MANUAL
IMPORTANT:

Read Before Using.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - SAVE THESE INSTRUCTIONS.

3 15. Disconnect tools. When not in use, before servicing and when changing accessories such as blades, bits and cutters. 16. Remove adjusting keys and wrenches. Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on. 17. Avoid unintentional...

Page 5 - INSTALATION; Securing the band saw stand; • After attaching the stand, attach the handle and tires.

5 INSTALATION Securing the band saw stand If during operation there is any tendency for the band saw to tip over, slide or move, the band saw stand be secured to the floor. • After attaching the stand, attach the handle and tires. 1 2 3 4 5 Frame Handle Tire Hex socket head bolt Washer

Page 6 - How to load dust box

6 How to load dust box The dust box is loaded from the underside of the table saw. When loading, insert plate spring (for securing) at inside edge of the machine’s positioning hole, slot both shoulders of dust box onto rails, and then slide toward the outside.Once the leading edge of the securing pl...

Other Makita Models