Makita EH6000W - Manual - manualsarea.com

Page 2 - SYMBOLS; English; Table of Contents

2 Thank you very much for selecting the MAKITA hedge trimmer. We are pleased to be able to offer you the MAKITA hedge trimmer which is the result of a long development program and many years of knowledge and experience. The hedge trimmer models EH5000W, EH6000W and EH7500W combine the advantages of ...

Page 3 - General Instructions; Intended use of the machine; SAFETY INSTRUCTIONS

3 General Instructions - THIS MACHINE CAN CAUSE SERIOUS INJURIES. Read the Instructions carefully for correct handling, preparation, maintenance, starting and stopping of the machine. Be familiar with all controls and the proper use of the machine. (1) - It is recommended only to loan the hedge trim...

Page 4 - meters

4 Starting up the hedge trimmer - Please make sure that there are no children or other people within a working range of 15 meters (5), also pay attention to any animal in the working vicinity. - Before operating, always check the hedge trimmer is safe for operation. - Check the security of the throt...

Page 5 - Method of operation; Maintenance instructions; Packaging

5 Method of operation - Always use two hands to grip each handle during operation. - Use the hedge trimmer only in a good light and visibility. During cold seasons beware of slippery or wet areas, ice and snow (risk of slipping). Always ensure a safe footing. - Never work on unstable surfaces or ste...

Page 6 - TECHNICAL DATA; Model

6 TECHNICAL DATA Model EH5000W EH6000W EH7500W Dimension (L x W x H) mm 1,014 x 262 x 216 1,119 x 262 x 216 1,259 x 262 x 216 Mass (without blade cover) kg 4.8 5.0 5.2 Volume (fuel tank) L 0.4 Engine displacement cm 3 22.2 Cutting length mm 483 588 728 Maximum engine performance kW 0.68 Stroke per m...

Page 7 - DESIGNATION OF PARTS

7 DESIGNATION OF PARTS DESIGNATION OF PARTS DESIGNATION OF PARTS DESIGNATION OF PARTS 1 Blade 7 Carburetor (not shown) 13 Release lever 2 Blunt extension 8 I-O switch (ON-OFF) 14 Muffler 3 Front handle 9 Spark plug 15 Primer pump 4 Recoil starter 10 Lock-off lever 16 Fuel tank 5 Fuel tank cap 11 Thr...

Page 9 - PRECAUTIONS BEFORE STARTING

9 Refuelling - The engine must be switched off.- Stop the engine during refuelling, keep away from flames and do not smoke. - Take care not to spill either fuel or oil in order to prevent soil contamination. Clean the hedge trimmer immediately after fuel has been spilled. - Do not spill fuel onto th...

Page 10 - remains at “; STARTING THE MACHINE; STOPPING THE MACHINE

10 Move at least 3 meters away from the place of refuelling. Place the hedge trimmer on a clean area of ground. Make sure that the cutting blades do not come into contact with the ground or any other objects. Cold starting: (When the engine is cold or it has been stopped for more than 5 minutes or w...

Page 11 - OPERATION OF THE MACHINE

11 - Never operate the hedge trimmer with a loose grip.- Never touch the cutting blades when starting the engine and during operation. - Operate the hedge trimmer in such a manner as to avoid inhalation of the exhaust gases. Never run the engine in enclosed rooms (Risk of gas poisoning). Carbon mono...

Page 12 - MAINTENANCE INSTRUCTIONS

12 - Turn off the engine and remove the spark plug connector when cleaning/replacing/sharpening the cutting blades or carrying out any maintenance. - Never straighten or weld a damaged cutting blade.- Frequently inspect the cutting blades for damage with the engine switched off. - Keep the cutting b...

Page 13 - Checking and adjusting the idling speed; Cleaning the air cleaner; DANGER: Inflammables strictly prohibited; Points in handling the air cleaner elements

13 Checking and adjusting the idling speed The cutting blades should not run when the engine is at idle. - Idle speed should be set to 3,000 min -1 (rpm). - If necessary, adjust the idle screw (the cutting blades must not run when the engine is on idle). • The cutting blades run while idling - turn ...

Page 14 - Cleaning the fuel filter (suction head in the fuel tank); WARNING: Inflammables strictly prohibited; Replacing the fuel pipe; CAUTION: Inflammables strictly prohibited; Replacing the tank cap

14 For any maintenance or adjustment not described in this manual, ask your local Makita authorized service center. Daily checkup and maintenance To ensure a long service life and to avoid any damage to the equipment, the following servicing operations should be performed at regular intervals.- Befo...

Page 15 - STORAGE; MAINTENANCE SCHEDULE

15 - When keeping the machine in storage for a long time, drain fuel from the fuel tank and carburetor, as follows: Drain all fuel from the fuel tank. - Remove the spark plug and add a few drops of oil into the spark plug hole. Then, pull the starter gently to confirm that oil film covers inside of ...

Page 16 - Makita Corporation

Makita EH6000W - Manual

Table of Contents:

Summary

Other Makita Models