Makita DC18WA - Manual
Makita DC18WA – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – epair; Terminal unit is fully integral with Charger case complete.
- Page 3 – Sign of Varistor breakage:; Varistor/ Fuse is soldered on Charging circuit.
- Page 4 – Be sure to push Power supply cord firmly between the ribs; Important
- Page 5 – Neither Varistor nor Fuse is supplied for the repair.
P 1/
5
Model No.
Description
C
ONCEPT AND MAIN APPLICATIONS
S
pecification
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
150 (5-7/8)
100 (3-15/16)
65 (2-9/16)
Model DC18WA is a Makita charger developed specially for
charging new slide-style Li-ion batteries.
New Makita Li-ion batteries model BL1411G (14.4V-1.1Ah)
and model BL1811G (18V-1.1Ah) can be charged approximately
in 60 minutes. But the maktec band Li-ion batteries designed with
the same concept, model L1451 (14.4V-1.1Ah) and model
L1851(18V-1.1Ah) cannot be charged.
In order to achieve a cost-competitive advantage, this charger
is not equipped with:
• Optimum charging system
• Forced air-cooling system
Also note that it is not compatible with:
• ADP01 Interchangeable adapter
• ADP02 Refreshing adapter
• ADP03 Automatic refreshing adapter
• ADP04 Interchangeable adapter
PRODUCT
DC18WA
Charger
Continuous Rating (W)
Voltage (V)
Cycle (Hz)
Input
Output
Standby power (W)
100 - 240
220 - 240
110 - 120
Current (A)
50/60
50/60
41
41
50/60
41
0.3
0.3
0.3
*
The charging time may depend on various conditions such as room temperature,
the condition of battery, etc.
Output voltage
Output current
Charging time*
DC 14.4 - 18V
DC 1.65 - 1.1A
approx. 60 min.
Protection against electric shock
Double insulation/ Grounding
Weight according to
EPTA-Procedure 01/2003:
kg (lbs)
Power supply cord: m (ft)
0.35 (0.77)
2.0 (6.6)
T
ECHNICAL INFORMATION
L
W
H
S
tandard equipment
O
ptional accessories
No
No
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
P 2 / 5 R epair [1] DISASSEMBLY/ASSEMBLY FOR DC18WA [1] -1. Terminal unit and Charger case complete Fig. 1 CAUTION: Disconnect the charger from the power source for safety before repair/ maintenance! DC18WA has two different kinds of specifications. Distinguish them by name plate “DC18WA” and “DC18W...
P 3 / 5 R epair [1] DISASSEMBLY/ASSEMBLY FOR DC18WA [1] -1. Terminal unit and Charger case complete (cont.) Fig. 3 1. Set Connector on Charging circuit as drawn below. Then insert Push mount tie into the hole of Charging circuit until its levers are fixed in the hole. 3. Assemble Charger case comple...
P 4 / 5 R epair [2] DISASSEMBLY/ASSEMBLY FOR DC18WA U [2] -1. Terminal unit and Charger case complete Fig. 5 DISASSEMBLING ASSEMBLING 1. Turn Charger upside down and remove four Tapping screws. 2. Turn Charger over again and open Charger case complete from rear side. Charger case complete Charger ca...
