Makita DC18RC - Manual
Makita DC18RC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – epair; from those shown in the following drawings.
- Page 3 – Note
- Page 5 – In this case, replace Varistor solely.
Continuous Rating (W)
Voltage (V)
Cycle (Hz)
Input
Output
Standby power (W)
DC 7.2 - 18
DC 9.0
2.0 (6.5)
0.75 (1.65)
110-120
50/60
240
Models No.
Description
PRODUCT
Current (A)
C
ONCEPT AND MAIN APPLICATIONS
S
pecification
O
ptional accessories
P 1/ 5
DC18RC
Charger
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
156 (6-1/8)
190 (7-1/2)
84 (3-5/16)
220-240
50/60
240
0.4
0.8
Power supply cord: m (ft)
Weight according to
EPTA-Procedure 01/2003: kg (lbs)
Output voltage: V
ADP03 Automatic Refreshing Adapter,
ADP04 Interchangeable Adapter
Output current: A
Li-ion
BL1815
Cell
Charging time
Voltage:V
Capacity:Ah
Battery
Approx. 15 min.
Approx. 20 min.
Approx. 22 min.
Approx. 30 min.
Approx. 45 min.
Approx. 60 min.
Approx. 70 min.
18
9.6
1.3
BL1430, BL1430A
14.4
3.0
Li-ion
Ni-MH
Ni-MH
BH1420
14.4
BH9020, BH9020A
2.0
2.0
14.4
BH1427
2.7
7.2 - 18
Ni-Cd
*
2
2.6
12
Ni-MH
3.3
BH1233, BH1233C
Note:
The charging time depends to a large extent on battery's temperature or room temperature.
*2:
use with interchangeable adapter ADP04 (optional accessory).
Model DC18RC is a new developed compact size fast charger
with the equivalent functions as current model DC18RA.
Its brief benefits are:
1) Only 22 minutes to fully charge of 3.0Ah Li-ion battery
2) Innovative computer controlled charging system provides
optimum charge to each battery through the digital
communication between charger and battery
3) Cooling fan to keep the battery temperature low
for minimum charging time
4) The adapter ADP04 (optional accessory) enables to charge
the existing Ni-Cd and Ni-MH batteries
5) The adapter ADP03 (optional accessory) enables to refresh
inactive batteries
6) Selectable melody sound of completed charging
W
L
H
9.6
BH9033, BH9033A
3.3
Ni-MH
Ni-MH
*
2
Ni-MH
*
2
7.2 - 18 All 1.3Ah Ni-Cd batteries except maktec series
All 2.0Ah Ni-Cd batteries
All 2.6Ah Ni-MH stick/ pod batteries
9.6 - 18
3.0
All 3.0Ah Ni-MH stick/ pod batteries
1.3
7.2 - 18
2.0
Ni-Cd
*
2
Double insulation
*
1
*1:
excludes some countries
Protection against electric shock
T
ECHNICAL INFORMATION
14.4
BL1415
12
BH1220, BH1222C
14.4
BH1433
BL1830
18
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
P 2/ 5 R epair CAUTION: • Repair the machine in accordance with “Instruction manual” or “Safety instructions”. • Due to the difference of factories, the shapes and positions of actual parts are different from those shown in the following drawings. [1] DISASSEMBLING / ASSEMBLING [1]-1. Charger case a...
[1] DISASSEMBLING / ASSEMBLING [1]-2. Terminal cover DISASSEMBLING 1. While compressing a couple of Compression spring 4 toward the retaining portions of Terminal cover, insert the boss of Terminal cover into the elliptic hole of Charger case. Terminal cover Fig. 4 Fig. 3 3x10 Tapping screw Charger ...
[1] DISASSEMBLING / ASSEMBLING [1] -5.Varistor and Fuse (2) Replacing Varistor/ Fuse Varistor/fuse is soldered on the Circuit board. Remove a broken Varistor / Fuse with soldering iron and solder brand-new one. ( Fig. 7 ) Note : Be sure to use the appropriate parts. (1) Types of Breakage 1. If Fuse ...
