Makita 5620D - Manual - manualsarea.com

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA003-1 (FOR All BATTERY OPERATED TOOLS) WARNING: Read and understand all instructions. Failure to follow all instructions listed bel...

Page 4 - SPECIFIC SAFETY RULES

4 22. When servicing a tool, use only identicalreplacement parts. Follow instructions inthe Maintenance section of this manual. Use of unauthorized parts or failure to followMaintenance instructions may create a risk ofshock or injury. SPECIFIC SAFETY RULES USB067-1 DO NOT let comfort or familiarity...

Page 8 - Tips for maintaining maximum battery life

8 may result in a risk of overheating, possi-ble burns and even an explosion. 4. If electrolyte gets into your eyes, rinsethem out with clear water and seek medi-cal attention right away. It may result inloss of your eyesight. 5. Always cover the battery terminals withthe battery cover when the batt...

Page 11 - ASSEMBLY; Removing or installing saw blade

11 ASSEMBLY CAUTION: • Always be sure that the tool is switched off and thebattery cartridge is removed before carrying out anywork on the tool. Removing or installing saw blade CAUTION: • Be sure the blade is installed with teeth pointing up atthe front of the tool. • Use only the Makita wrench to ...

Page 12 - OPERATION

12 OPERATION CAUTION: • Be sure to move the tool forward in a straight line gently.Forcing or twisting the tool will result in overheating themotor and dangerous kickback, possibly causing severeinjury. • If the tool is operated continuously until the batterycartridge has discharged, allow the tool ...

Page 13 - MAINTENANCE; Adjusting for accuracy of 90° cut (vertical cut)

13 MAINTENANCE CAUTION: • Always be sure that the tool is switched off and thebattery cartridge is removed before attempting toperform inspection or maintenance. Adjusting for accuracy of 90° cut (vertical cut) This adjustment has been made at the factory. But if it is off,adjust the adjusting screw...

Page 14 - Recycling the Battery; ACCESSORIES

14 To maintain product SAFETY and RELIABILITY, repairs, anyother maintenance or adjustment should be performed byMakita Authorized or Factory Service Centers, always usingMakita replacement parts. EN0001-1 Recycling the Battery The only way to dispose of a Makita battery is to recycle it.The law pro...

Page 15 - Memo

Page 18 - Your answers to the following questions are appreciated.; Certificate of Warranty

18 Your answers to the following questions are appreciated. Date Purchased Model No. Serial No. Initial Last Name Street Address City Province AGE: Male Female Married Single Month Day Year 20 Under 19 20-29 30-39 40-49 Over 50 Paste Paste Paste Paste Paste Paste Paste Paste P aste P aste P aste P a...

Page 19 - Factory Service Centres; CUSTOMER RECORD

19 Factory Service Centres For the authorized service centre nearest you please refer to the local yellow pages directory under “tools” or con-tact our customer service department (Tel) 1-800-263-3734 When you need service... • Explain the problem in a letter • Enclose the letter with the tool • Pac...

Page 20 - Warranty Policy; MAKITA LIMITED ONE YEAR WARRANTY; Makita Corporation of America

Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects fromworkmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop duringthis one year period, return the COMPLE...

Makita 5620D - Manual

Table of Contents:

Summary

Other Makita Models