Makita 2012NB - Manual - manualsarea.com

Page 2 - SPECIFICATIONS

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. For Your Own Safety Read Instruction Manual Before Operating Tool Save it for future reference GENERAL SAFETY PRECAUTIONS USA007-1 (For All Tools) 1. KNOW ...

Page 4 - ADDITIONAL SAFETY RULES

4 USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current yourproduct will draw. An undersized cord will cause a drop in line voltage resulting in loss ofpower and overheating. Table 1 shows the...

Page 5 - SAVE THESE INSTRUCTIONS

5 SAVE THESE INSTRUCTIONS WARNING: MISUSE or failure to follow the safety rules stated in thisinstruction manual may cause serious personal injury.

Page 6 - INSTALLATION; Movement and transport of planer; Positioning the planer

6 INSTALLATION Movement and transport of planer CAUTION: • Watch your step when moving the tool. Fold the sub-tables. Grasp the carrying handles when mov-ing the tool.When transporting it by vehicle, secure with a rope or othersubstantial means to prevent tipping or movement. Positioning the planer ...

Page 9 - ASSEMBLY; Replacing planer blades

9 ASSEMBLY CAUTION: • Always be sure that the tool is switched off andunplugged before carrying out any work on the tool. Replacing planer blades CAUTION: • Handle the blades very carefully when removing orinstalling the blades to prevent cuts or injury from theblades and to prevent damage to the bl...

Page 13 - OPERATION

13 The planer stand should be bolted with the four bolts to thefloor using the bolt holes provided in the legs. OPERATION CAUTION: • Two or more pieces of narrow but similar thickness stockcan be passed through the planer side by side.However, allow some spacing between the stock topermit the feed r...

Page 14 - MAINTENANCE; Adjusting height of sub-table

14 • Stop the tool when the workpiece has stalled. Allowingthe tool to run with a stalled workpiece causes rapidwearing of the feed rollers. MAINTENANCE CAUTION: • Always be sure that the tool is switched off andunplugged before attempting to perform inspection ormaintenance. Adjusting height of sub...

Page 16 - ACCESSORIES

16 ACCESSORIES CAUTION: • These accessories or attachments are recommended foruse with your Makita tool specified in this manual. Theuse of any other accessories or attachments mightpresent a risk of injury to persons. Only use accessory orattachment for its stated purpose. If you need any assistanc...

Page 18 - MAIL THIS PORTION; Your answers to the following questions are appreciated.; Please return this portion by facsimile or mail.

18 1. This product was purchased from: Home Center Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply Other ( ) 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog Radio Exhibition From Friend Previous Usage Other ( ) 2. Use of the ...

Page 19 - FACTORY SERVICE CENTERS; RETAIN THIS PORTION FOR YOUR RECORDS

19 FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ARIZONA 3707 E. Broadway Rd., Ste. 6 Phoenix, AZ 85040 (602) 437-2850 CALIFORNIA 41850 Christy St. Fremont, CA 94538-5107 (510) 657-9881 14930 Northam St. La Mirada, CA 90638-5753 (714) 522-8088 1970 Fulton Avenue Sacrame...

Page 20 - WARNING; MAKITA LIMITED ONE YEAR WARRANTY; Warranty Policy; Makita Corporation

WARNING Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known to the State of Californiato cause cancer, birth defects or other reproductive harm. Some examplesof these chemicals are:• lead from lead-based paints, • crystalline sili...

Makita 2012NB - Manual

Table of Contents:

Other Manuals for Makita 2012NB

Summary

Other Makita Electric Planers Models