Majestic ODSR36A - Manual - manualsarea.com

Page 2 - Majestic Fireplaces; Listed; Standard for Factory Built Fireplaces; Installing Line for Gas Logs

2 Majestic Fireplaces ® ODSR Series "A" 20006811 ODSR36A / ODSR42A Listed UL 127 / ULC-S610 Standard for Factory Built Fireplaces Safety Information Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Precautions . . . . . . . . . . ....

Page 3 - PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING FIREPLACE.; Description; Any such action may possibly cause a fire hazard.; before; installing the fireplace.; Drafts; Proposition 65 Warning:; Safety Information

3 Majestic Fireplaces ® ODSR Series "A" 20006811 PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING FIREPLACE. IMPORTANT: Read all instructions and warnings carefully before starting installation. Failure to follow these instruc- tions may result in a possible ﬁre hazard and will void the w...

Page 4 - ODSR42A Woodburning Fireplace — Circulating Model

4 Majestic Fireplaces ® ODSR Series "A" 20006811 Fig. 2 ODSR42A speciﬁcations and framing. ODSR42A Woodburning Fireplace — Circulating Model 42" (1067 mm) 46" (1168 mm) 39 �� " (1006 mm) 5/8" (16 mm) 5/8" (16 mm) 1/2" (13 mm) 1/2" 22 �� " (578 mm) 24" (6...

Page 5 - Front Width Back Width; When installation; Chase Installation; Exterior Chase Installation

5 Majestic Fireplaces ® ODSR Series "A" 20006811 A B C FP1531hearth dimensions9/04 djt Front Width Back Width Depth A B C ODSR36A 31 ¹⁄₈ " 19 ⁷⁄₈ " 15 ¹⁄₂ " (791 mm) (505 mm) (394 mm) ODSC42A 36 ³⁄₄ " 22 ⁷⁄₈ " 15 ¹⁄₂ " (934 mm) (581 mm) 394 mm) FP1531 Fig. 3 Hearth di...

Page 6 - If the fireplace is a

6 Majestic Fireplaces ® ODSR Series "A" 20006811 FP1001 fireplace setting 1/4/00 djt 10' (3m) Min. 6'4" (1.9m) Min. NOTE: If the ﬁreplace is a freestanding unit, it must be located a minimum of 10' (3 m) from the opening of the ﬁrebox to a combustible structure.A minimum height of 6'4...

Page 7 - Chimney Requirements - Offset Installations; 0 ̊ Elbow Offsets; Illustration Key; total; RISE

7 Majestic Fireplaces ® ODSR Series "A" 20006811 0 0 0 0 0 3" 11" 1 0 0 0 0 8 ¹⁄₄ " 20" 0 1 0 0 0 11 ¹⁄₄ " 25 ¹⁄₄ " 2 0 0 0 0 13 ¹⁄₂ " 29 ¹⁄₄ " 1 1 0 0 0 16 ¹⁄₂ " 34 ¹⁄₄ " 0 0 1 0 0 20 ¹⁄₄ " 40 ³⁄₄ " 2 1 0 0 0 21 ³⁄₄ " 43 ¹⁄₂ " 0 0 0 1 ...

Page 8 - Planning Information; Mounting the Fireplace; The fireplace; must

8 Majestic Fireplaces ® ODSR Series "A" 20006811 Planning Information Preplanning an installation is very important to ensure safety and to save time and money. An installer must predetermine where a ﬁreplace will be set and how the chimney system will be run. Mounting the Fireplace A ﬁrepla...

Page 9 - Installation; Chimney Supports; must not; Support provided by elbow straps fulfills the; BR; Insulating Fireplace Enclosure; If you live in a cold climate, it is not required but; highly recommended; that you insulate fireplace; very important; for outside wall installations over

9 Majestic Fireplaces ® ODSR Series "A" 20006811 Installation Chimney Supports The chimney system is supported by the ﬁreplace for vertical chimney heights less than 30' (9 m) above the hearth. Chimney supports are required if the vertical height exceeds 30' (9 m) with SK8 chimneys or 20' (6...

Page 11 - Cutting the Hole

11 Majestic Fireplaces ® ODSR Series "A" 20006811 Cutting the Hole Cover ﬁreplace collar opening and cut proper sized chimney hole in chimney. The SK8 pipe allows you to run pipe through a typical 16” on center joist without cutting joists. Framing the Ceiling Hole Frame the ceiling chimney ...

Page 12 - Elbow Strap; is

12 Majestic Fireplaces ® ODSR Series "A" 20006811 FP270/271 CR Series 2/19/99 djt Elbow Strap Angled Strap Fig. 18 Attach straps to a structural framing member. FP270/271 Support Structure Elbow Strap (must be tight) Ceiling Hole Framing Angle Firestop Chimney Support Strap (must be tight) I...

Page 13 - Attic Installation; Chimney supports are generally used in long; use an approved; horizontal

13 Majestic Fireplaces ® ODSR Series "A" 20006811 FP593 SR/C 11/20/97 Fig. 19 Installing ﬁrestop spacer. FP593 Attic Installation Ceiling Installation Nails (4) Firestop Spacer Joist Joist Firestop Spacer Nails (4) Install the attic insulation shield with the ﬂanges on its base extending dow...

Page 14 - Ten Foot Rule; Air Space Clearances

14 Majestic Fireplaces ® ODSR Series "A" 20006811 Cut and frame the hole. It is good practice to use fram-ing lumber that is the same size as the rafters. Install the frame securely because the chimney top and ﬂash-ing anchored to the frame must be able to withstand heavy winds. Install Rema...

Page 16 - Minimum Wall Clearances; Side Wall Protection; Examples of wall shield insulation:; Hearth Installation; or

16 Majestic Fireplaces ® ODSR Series "A" 20006811 Minimum Wall Clearances WITH Noncombustible Surround Facing WITHOUT Noncombustible Surround Facing Minimum Hearth Extension Dimensions (for On-Site Construction) G H G J Seal cracks between the fireplace and hearth extension with noncombustib...

Page 17 - To determine the thickness required for any; new; K of new material (per inch) Thickness; Example for Common Brick; COMMON MATERIALS AND FACTORS; Side View

17 Majestic Fireplaces ® ODSR Series "A" 20006811 WARNING: HEARTH EXTENSION MUST BE IN-STALLED IN ACCORDANCE WITH FIGURE 25 AND MUST NOT COVER THE BOTTOM FRONT OPENING OF THE CIRCULATING MODEL. Alternate noncombustible materials may be used pro-viding the (total) thermal resistance (Rt value...

Page 18 - If installing an unvented gas log set, refer to statement below:; Fireplace Top View; CSA draft

18 Majestic Fireplaces ® ODSR Series "A" 20006811 CAUTION: WHEN USING DECORATIVE GAS APPLIANCE, FLUE DAMPER MUST BE SET IN FULLY OPEN POSITION. IF YOU HAVE GLASS DOORS ON THE FIREPLACE, THEY MUST ALSO BE FULLY OPENED. WARNING: DO NOT OPERATE AN UNVENTED GAS LOG SET IN THIS FIRE-PLACE WITH TH...

Page 19 - ODSR36A/42A Outdoor Woodburning Fireplace

19 Majestic Fireplaces ® ODSR Series "A" 20006811 1 2 3 4 5 6 a b c 7 8 9 10 6811ODSR parts9/2/03 djt d 11 e ODSR36A/42A Outdoor Woodburning Fireplace Item/Model Number ODSR36A ODSR42A 1. Damper Weld Assembly RP199 RP199 2. Damper Bracket 3030176 3030176 3. Screen Rod Assembly 20006805 20006...

Page 20 - Model Number; Accessories

20 Majestic Fireplaces ® ODSR Series "A" 20006811 Glass Door — Standard Bi-Fold door set Brushed Brass ﬁnish 36GDKBBSR (ODSR36A) 42GDKBBSR (ODSR42A) Black ﬁnish 36GDKBKSR (ODSR36A) 42GDKBKSR (ODSR42A) Polished Brass ﬁnish 36GDKDBSR (ODSR36A) 42GDKDBSR (ODSR42A) Pewter ﬁnish 36GDKSSR (ODSR36A...

Page 21 - Chimney Components

21 Majestic Fireplaces ® ODSR Series "A" 20006811 Chimney Components Round Top Termination Top used to terminate chimney at roof. RLTSK8 (Flashing not included.) Round Top Termination - Top used to terminate chimney at chase. RLTSK8L Extended (Flashing not included.) Flashing Metal ﬁnishing ...

Page 22 - Canada

22 Majestic Fireplaces ® ODSR Series "A" 20006811 Chimney Collar Enclosure Installs on the "over the chimney collar" of the CCE-SK ﬁreplace; provides outside air to assist in cooling the chimney system. Attic Insulation Shield Used to prevent insulation from coming in AIS-SK contact ...

Page 23 - LIMITED WARRANTY & 30 YEAR PROTECTION PLAN; For MAJESTIC FIREPLACES

23 Majestic Fireplaces ® ODSR Series "A" 20006811 LIMITED WARRANTY & 30 YEAR PROTECTION PLAN For MAJESTIC FIREPLACES ® PRE-ENGINEERED Fireplace Systems CFM Corporation warrants its MAJESTIC FIREPLACES® Pre-En-gineered Fireplace (“Fireplace”) and the CFM Corporation supplied ﬁregrate, gla...

Page 24 - CFM Corporation

2695 Meadowvale Blvd. • Mississauga, Ontario, Canada L5N 8A3 800-668-5323 • www.cfmcorp.com CFM Corporation