Page 2 - For your Safety
2 Safeguards & Safety Thank you very much for your purchase of this product. To enjoy your set to the full from the very beginning, read this manual carefully and keep it handy for ready reference. When using electrical appliances, in order to reduce the risk of fire, electric shock, and/or injur...
Page 3 - Product Features
3 Ventilation There should be at least 10cm space between the top, rear and sides of the TV. To Prevent the TV From Falling Over To prevent the TV from falling over due to earthquakes, children playing, etc., place the TV on a stable horizontal surface. Wall or Ceiling Mounting We do not recommend m...
Page 4 - Contents
4 Safeguards & Safety ....................................................................................................................................................................... 2 Product Features ..........................................................................................
Page 5 - Quick Start
5 Quick Start Note: For connection of Television directly to Wall socket or indoor antenna only. 1. Carefully unpack your Magnavox television, ensuring the following items are present:- • Instruction Booklet • Remote Control • 75Ohm Antenna Lead • 2 x AA size batteries for Remote Control 2. Read thr...
Page 6 - Knowing Your Television Set; Front Controls for MTV68A
6 Knowing Your Television Set Front Controls for MTV68A Remote control sensor : If remote control unit within an effective operating range, the unit can be operated. Remote indicator light : When the unit is on, the indicator is lighted. Power button : To turn unit on, press the button and the indic...
Page 7 - Back Connections; Front Controls for MPF68A
7 Ω Back Connections Remote control sensor : If remote control unit within an effective operating range, the unit can be operated. Remote indicator light : When the unit is on, the indicator is lighted. Power button : To turn unit on, press the button and the indicator will light up. Press the butto...
Page 8 - Remote Control Handset
8 Infrared LED Remote Control Handset Standby - to switch the TV off, to Standby mode or on last viewed position Direct Access Tuning Quick View Digit - to select the digit of the position number Sleep - to set the Sleep Timer Scan Menu 2 Channel Up/Down Volume Up/Down TV/AV - to select the signal s...
Page 9 - To Prepare Remote Control Handset
9 Battery Installation The remote control unit uses two AA batteries. For battery installation and replacement, read the following. 1. Turn the remote control unit upside down. Press down on the grip of the battery compartment and slide the cover in the direction of the arrow. 2. Install two new bat...
Page 10 - Tuning Procedure
10 MENU 1 - A. Press [MENU 1] key continuously, menu screen will appear as follows: B. Press [P+] [P-] key, cursor up or down. Press [V+] [V-] key, change value for selection . Note: Tint only for NTSC system. Auto Search Function Automatic Search and Memory (ASM) for program installation from Anten...
Page 11 - Fine; Skip
11 Fine FUNCTION: Fine Tuning for current setting. May be used to tune weak stations. A. Press [MENU 1] key repeatedly to select “PRESET”. B. Using [P+] or [P-] key, select “PROGRAM.”. Using [V+] or [V-] change Program Number. C. Using [P+] or [P-] key, select “FINE TUNE”. D. Using [V+] or [V-] key,...
Page 12 - Direct Access Tuning; Normal Operation
12 1. Power ON /OFF Firstly, the power supply of the unit must be switched at the power switch on the television set. This status is called Stand-By mode. While in standby mode, the TV can be turned on/off via the remote control by pressing the ON/ OFF button or alternatively the [P+]/[P-] keys on t...
Page 17 - Menu Operation
17 Picture Menu Function: Brightness, Contrast, Colour Sharpness, Tint. A. Press [MENU] key on TV set or press [MENU 1] key on remote control, MENU appears on screen. Select “PICTURE”. B. Select each function using the [P+]/[P-] keys. C. Each value can be controlled by the [V+]/[V-] keys. D. Repeat ...
Page 18 - Clock Function; Picture Adjustment
18 Menu Operation Clock Function Time and Timer setting. A. Press [MENU] key on front or press [MENU 1] key on remote control, MENU appears on screen. Select “CLOCK”. B. TIME (TIME, TIMER, OFF-TIME, ON-TIME) setting: Using the [V -] key, hours will increase from “0, 1... 23,24”. Using the [V+] key, ...
Page 19 - Troubleshooting
19 Troubleshooting Before calling the service personnel, please check the list below to fix some simple problems not caused by the unit itself. Symptom To be checked No picture. No sound. Be sure the power cord is plugged in. Normal picture. No sound. The sound volume is adjusted to the lowest level....
Page 20 - Technical Data
20 Technical Data Rated voltage: AC 230-240V, 50Hz Power consumption: 138-150W Sound output: 4W x 2 Dimensions: 780mm (w) x 580mm (h) x 570mm (d) Mass: 35kg approx. System: Colour sound RF PAL 5.5MHz AV NTSC 3.58/4.43 PAL4.43 Channel coverage: CATV 470MHz *Design and specifications are subject to cha...
Page 21 - Notes
Page 22 - Warranty
22 Warranty The benefits conferred by this warranty are in addition to all implied warranties, other rights and remedies in respect of the product which the consumer has under the Trade Practices Act and similar State and Territory Laws. The original purchaser of this MAGNAVOX product is provided wit...
