Mackie SP400C - Manual
Mackie SP400C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Instructions
- Page 4 – IN
- Page 5 – Installation with Rigid Conduit; Flexible; DO NOT
- Page 6 – System Acoustic; FULL RANGE
- Page 7 – SP400C Frequency Response vs. Impedance; Vert BW; SP400C Beamwidth vs. Frequency; Physical
- Page 8 – Disclaimer; Mackie Designs continually engages in research; Service Information; This is
SP400C
2-Way Ceiling Monitor
Sound Palette
Instruction Manual
3.7
7.5
15
30
70v
100v
HIGH
PASS
FULL
RANGE
FULL
RANGE
(16 OHMS)
7.5
15
30
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SP400C – 2 1. Safety Instructions 1.1. Read Instructions — Before connecting and usingthe equipment, please read this Instruction Manualcarefully and keep it for future reference. 1.2. HEED ALL WARNINGS — Always follow theprecautions provided on this Mackie Designs productand in the instruction manu...
SP400C – 4 6. Installing the SP400C The SP400C can be installed into suspended or drywall-based ceilings. The speaker is secured inplace with the four rotating mounting tabs. Thesupport rails are used with suspended ceilings(standard 24" spacing) to transfer the weight of thespeaker to the T-cha...
SP400C – 5 speaker connector (8) to the 4-pin terminal. Tighten the strain relief screws to secure thespeaker cable or flexible conduit. Close theterminal cover plate (7) and tighten the locking screw (7a) firmly. B. Installation with Rigid Conduit 1 B1.Remove the two screws holding the strain relie...
