M-Audio 81602 - Manual
M-Audio 81602 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Introduction; Temporal Harmonic Alignment; Your TAMPA’s Features; Front Panel Features; MICROPHONE/INSTRUMENT: Neutrix connector accepts both an XLR
- Page 3 – Rear Panel Features; Setup and Connection; Connecting TAMPA to your equipment is simple.; AC power
- Page 4 – To output to digital equipment:; Connect either the S/PDIF OUTPUT or AES/EBU OUTPUT to your sound; Connecting Your Tampa’s Outputs
- Page 5 – TAMPA Controls; Setting Levels
- Page 7 – To set TAMPA’s compressor:; Set the COMPRESSOR IN/OUT switch to the IN position, wih all; Setting the Compressor
- Page 8 – Typical Settings
- Page 9 – TAMPA Specifications; Preamp Specs; Technical Support & Contact Information
- Page 10 – Your TAMPA’s Warranty
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Temporal Harmonic Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Dual Optical Servo Compressor . . . . . . . . . . . . . . . . . . . . . . . . . .2
Your TAMPA’s Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Front and Rear Panel Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Front Panel Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Rear Panel Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Setup and Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
AC power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Connecting Your Tampa’s Outputs . . . . . . . . . . . . . . . . . . . . . . . . .6
Power-Up Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting To Your Tampa’s Inputs . . . . . . . . . . . . . . . . . . . . . . . .8
TAMPA Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Setting Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
The Input Impedance Selector . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Using the Phase Invert Switch . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Using the Low-Cut Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Setting the Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
TAMPA Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Preamp Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Analog Compressor Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Technical Support & Contact Information . . . . . . . . . . . . . . . . . . . . . .17
Your TAMPA’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
TAMPA Manual
version:
Tampa-081602
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 Introduction Congratulations on your purchase of the TAMPA, designed andmanufactured by M-Audio. TAMPA is a professional, single channelmicrophone/instrument preamp unlike any other.That’s because our designteam set out to discover just why expensive tube technology sounds sogood, and devise a way...
9. LOW CUT: Rolls off 12dB per octave at 80Hz and below when engaged. Use this to avoid rumble from passing traffic, footsteps and so forth. 10. COMPRESSOR IN/OUT: Engages/disengages the TAMPA’s entire compressor stage. When disengaged, TAMPA’s compressor circuitry isremoved from the signal path. 11...
To output to digital equipment: 1. Connect either the S/PDIF OUTPUT or AES/EBU OUTPUT to your sound card, digital recorder or other digital device using an analogous connectorand a good quality digital cable. 2. Use the SAMPLE RATE knob to select the sample rate matching that of the destination devi...
