M-Audio 52803 - Manual - manualsarea.com

Page 2 - MIDI keyboard controller with built-in MIDI and audio interface; M-Audio Ozone Overview

Introduction Congratulations on your purchase of the M-Audio Ozone. The M-AudioOzone is an innovative product—a powerful combination of MIDIcontroller and audio interface with microphone and instrument preampsthat will turn your computer into a virtual music production studio. You may use your M-Aud...

Page 3 - What’s in the Box; M-Audio Ozone USB Audio/MIDI Mobile Workstation

addition of eight programmable rotary knobs) allow it to send virtually anytype of MIDI controller information. Additionally, the M-Audio Ozone canoperate as a “standalone” MIDI controller, independent of the computer.The rear panel MIDI port marked “Keyboard” is used for this purpose. Within the M-...

Page 4 - Guide to Getting Started; Connect the audio inputs and outputs to your mixer or monitor; M-Audio Ozone Panel Features; Top Panel; Pitch Bend Wheel: The Pitch Bend Wheel sends out MIDI messages

Guide to Getting Started Here is an outline of the steps needed to begin using your M-Audio Ozoneon either a Mac or a PC: 1. Install the Driver (see “Software Installation”).2. Attach the M-Audio Ozone to your computer (see “Hardware Installation”).3. Connect your sound module to the M-Audio Ozone (...

Page 6 - Rear Panel

Rear Panel 1. Power Switch: The Power Switch turns on the M-Audio Ozone. You probably figured that one out for yourself. 2. Power Jack: This jack is used to connect the keyboard to the supplied 9VAC 1000mA “wall-wart” type power supply. 3. USB Port: This USB connector jack is used to connect the M-A...

Page 7 - M-Audio Ozone Driver Installation; Driver Installation for Windows

12. Mic In (Channel 1): This is an XLR Balanced preamp input for microphones. Mic In preamp gain is controlled by the top panel “MicGain” control. This input also gets defeated if the Aux Input is pluggedin, and the Monitor/Record button is pressed to the “Record” position. 13. Direct Monitor Stereo...

Page 12 - The “Found New Hardware Wizard” will again appear. Click “Next”; The installer will install DirectX version 8.1

15. The “Found New Hardware Wizard” will again appear. Click “Next” to continue. 16. Another Windows Logo Testing window will appear. Click “Continue Anyway” to continue. 17. The next window informs you that the Wizard has finished installing the software. Press “Finish” to continue. Your installati...

Page 15 - Windows will prompt you to restart the computer. Make sure that “Yes,

8. An M-Audio Setup Window will come up, confirming a successful setup. Click, “Next,” to successfully install the M-Audio Ozone. 9. Windows will prompt you to restart the computer. Make sure that “Yes, restart my computer now,” is checked and then click, “Finish,” to restart 10. When you are comple...

Page 19 - Click “Yes” to continue.

installation (if you have not previously installed this update). Click“Next” to install DirectX 8.1. 4. Click next to verify that you would like to install Microsoft DirectX 8.1. 5. The next window shows the Microsoft DirectX 8.1 license agreement. Click “Yes” to continue. 6. Click “OK” at the next ...

Page 20 - Do not turn on the device; Click “Next” to continue.

7. After restart, the next window reminds you to verify that the M-Audio Ozone is disconnected from the USB bus before continuing, and that youhave closed all other Windows applications. Do so now, then click “Next”to continue. 8. An M-Audio Setup Window will appear next. Make sure both “Enable Digi...

Page 21 - checkmark enabled, click “Finish” to restart.

10. The following window prompts you to restart your computer.With the checkmark enabled, click “Finish” to restart. 11. After Windows has completely restarted, turn on your device using the power button on the back of the M-Audio Ozone. A window will thenprompt you to click “Next” to continue. 12. ...

Page 22 - In the next window, click “Next” to install the recommended driver.

13. The next window defaults to browse to a specified location. Click “Next” to continue. 14. In the next window, click “Next” to install the recommended driver. 15. The next window prompts you that the driver will now be installed. Click “Next.” 23

Page 23 - M-Audio Ozone and the Windows Sound System; Go to the Start menu, and then choose Control Panel (in Windows; Macintosh Driver Installation

16. The final window tells you that installation is complete. Click “Finish”.. After a few more ‘automatic’ windows which do not require any action, theinstallation procedure reaches completion, and your device is ready to use. M-Audio Ozone and the Windows Sound System After installation, the M-Aud...

Page 24 - On your Macintosh hard drive, locate and open the folder for you

OMS Installation To install OMS from the driver CD, locate the OMS 2.3.8 folder on this CD,find the OMS installer program in the folder, and double click on its icon tobegin installation. Once this process completed successfully, you can moveon to the M-Audio Ozone Installer. M-Audio Ozone Driver In...

Page 28 - The M-Audio Ozone Control Panel; In Windows, the M-Audio Ozone Control Panel shows up on

1. Go to "System Preferences" in the Apple Menu.2. Select the "Sound" preference panel, and click the "Output" tab. 3. Select "M-Audio Ozone" to choose the M-Audio Ozone as your default output device. You can also select the “Input” tab to make theM-Audio Ozone the de...

Page 30 - The M-Audio Ozone Control Panel will only be; Application Software Setup; Generally with both the Mac and PC, most MIDI

Connection Status: The M-Audio Ozone Control Panel will only be accessible when your M-Audio Ozone is connected to the computer andrecognized by the system. When the M-Audio Ozone is not connected, thepanel will either be grayed out, or a message will pop up indicating that theM-Audio Ozone is not r...

Page 31 - sure that the M-Audio Ozone audio driver is set to “M-Audio Ozone ASIO.”; M-Audio Ozone Hardware Installation

sure that the M-Audio Ozone audio driver is set to “M-Audio Ozone ASIO.” Within your music application, when you assign an audio track to receiveits input from the M-Audio Ozone Channel 1 or Channel 2—whether it’sthe Mic In and Instrument In, or when using the Aux Inputs in “Record”mode—you will set...

Page 33 - Using the Mic and Instrument Inputs

Using the Mic and Instrument Inputs Channel 1 of the M-Audio Ozone gives you a high gain, low noisemicrophone preamp. It provides a low impedance microphone input on anXLR connector with optional phantom power. A dynamic, condenser, orany other type of low impedance microphone will interface easily ...

Page 34 - Setting Input Gain; Phantom Power

Setting Input Gain The M-Audio Ozone provides up to 60dB of gain on the Channel 1 Mic Inand 40dB of gain on the Channel 2 Instrument In. Microphones typicallyemit a low signal level, requiring a "pre-amp" such as the M-Audio Ozoneprovides. Other instruments, such as guitar pickups and even s...

Page 35 - Using the Aux Inputs

to be safe, check your mic’s documentation to see if it will accept or needsphantom power. Some ribbon mics definitely should NOT receivephantom power, as this could damage them. Using the Aux Inputs The M-Audio Ozone has a pair of “Aux Input” line inputs, both on a single1/4” TRS jack. It is design...

Page 36 - Using Direct Monitor

Also, as we mentioned, using Record mode defeats the Mic and Instrumentinputs, so you will not be able to listen to or record from those inputswhen the Aux Input is in Record mode. Another example is to use the Record mode only to switch Channel 1 andChannel 2 to line inputs, for the purpose of reco...

Page 37 - M-Audio Ozone MIDI Setup and Control

monitoring, mute the channels you are recording to, or send their outputto another bus. In a typical Direct Monitor application, plug your microphone and guitarinto Channel 1 and Channel 2 on the rear panel. Arm a pair of inputs inyour computer recording software and set their recording levels using...

Page 38 - M-Audio Ozone MIDI Functions

In the following setup, the M-Audio Ozone is being used as a MIDIcontroller as well as a MIDI interface, inputting MIDI data to the computerand its application software, and outputting MIDI to a sound module fromwhich sounds will be produced. The M-Audio Ozone as a controller mayalso send MIDI infor...

Page 39 - MIDI Functions In Standalone Mode; matches the MIDI “receive” channel of the other instrument.; Default Settings of The M-Audio Ozone; Utilizing the Programming Assignment Keys

The keys on the M-Audio Ozone, in conjunction with the MIDI/SELECTbutton, give you the extra programming capability that is unique toM-Audio’s line of MIDI controllers (including the M-Audio Ozone, Oxygen8and Radium).You can use the Data Entry key to enter in values, or the keysthat are labeled with...

Page 40 - DATA ENTRY Assignments:; Pressing the MIDI/SELECT button then; Assign the desired MIDI controller parameter number using the

of your choice, send program change data from the keyboard, select theMIDI transmit channel of the M-Audio Ozone, set the octave or pitch ofthe keyboard, and program the eight rotary controllers. DATA ENTRY Assignments: Pressing the MIDI/SELECT button then pressing a key labeled by its MIDI function...

Page 41 - You can select up to five banks of presets for the M-Audio Ozone’s; Pressing the MIDI/SELECT button, followed by the RESET; Control Change Data Entry by Numeric Keypad:

4. Assign the MIDI channel number on number key group (1-16) then press Enter. This channel assignment will apply only to the controllerknob that you are programming. 5. You can select up to five banks of presets for the M-Audio Ozone’s keyboard, P1-P5, by pressing the MIDI/SELECT button. This is mo...

Page 43 - M-Audio Ozone Preset Chart

Page 44 - Technical Support & Contact Information

Technical Support & Contact Information For additional technical assistance, contact M-Audio Technical Support bytelephone (626-445-8495, 9-5 PST M-F), by fax (626-445-7564) or bye-mail ([email protected]). If you have questions, comments or suggestions about this product, or anyM-Audio produ...

Page 45 - M-Audio Ozone Warranty Information

M-Audio Ozone Warranty Information M-AUDIO warrants that this product is free of defects in materials andworkmanship under normal conditions for 90 days, so long as the productis: owned by the original purchaser; the original purchaser has proof ofpurchase from an authorized M-AUDIO dealer; and the ...

Page 46 - M-Audio Ozone Technical Specifications; General; Supports 24-bit or 16-bit audio input or output

M-Audio Ozone Technical Specifications General • Supports 24-bit or 16-bit audio input or output • Supports the following sampling frequencies (Hz): 8000, 11025, 12000,16000, 22050, 24000, 32000, 44100, 48000, 88200, 96000 • (Note: Because of USB bandwidth and device hardware constraints,there are l...

Page 47 - Appendix A - MIDI Controller Information