Page 2 - Revision Notice; Rear Cover
User Manual Tx800 2 E-EQ-TX800OGWW-B Notice: LXE Inc. reserves the right to make improvements or changes in the products described in this manual at any time without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, LXE assumes no liability r...
Page 3 - Table of Contents; BOUT THIS MANUAL
E-EQ-TX800OGWW-D-ARC 3 Table of Contents 1 A BOUT THIS MANUAL 7 1.1 Who should read this manual ............................................................................ 7 1.2 Notices ....................................................................................................................
Page 4 - SING THE
Table of Contents User Manual Tx800 4 E-EQ-TX800OGWW-D-ARC 4.4.1 Ports for connecting peripherals ....................................................................................24 4.4.2 Supplying power to peripherals .................................................................................
Page 5 - Illustrations
User Manual Tx800 Table of Contents E-EQ-TX800OGWW-D-ARC 5 II Port Signals .......................................................................................................... 39 III Technical Recommendations ............................................................................ 46 IV Di...
Page 7 - About this manual; Safety considerations; Who should read this manual; or from LXE’s
E-EQ-TX800OGWW-D-ARC 7 1 About this manual This manual covers the following topics related to installation, start-up, operation and maintenance of Tx800. • Safety considerations • General product information • Product installation procedures • Product use and maintenance • Troubleshooting The append...
Page 8 - About this manual; How to use this manual; To... Read; Manufacturers’ product documentation for the:
About this manual User Manual Tx800 8 E-EQ-TX800OGWW-D-ARC 1.3 How to use this manual To… Read Chapter… Prepare for electrical installation 2 Safety Prepare for product installation 3 Product description Install Åkerströms Tx800 4 Product installation Operate Tx800 5 Using the product Maintain prope...
Page 9 - Safety; Keep this in mind:
E-EQ-TX800OGWW-D-ARC 9 2 Safety 2.1 2.1 Personal safety Keep this in mind: Always exercise caution when working with electricity 2.2 Product safety 2.2.1 Supplying power Tx800 have to be supplied with an external fuse before connecting to recommended voltage (see 4.2.1). Connect only the recommended...
Page 11 - Product description; Design and functionality; Tx800 is designed to withstand vibrations, moist and dust.
E-EQ-TX800OGWW-D-ARC 11 3 Product description 3.1 Design and functionality Åkerströms Trux AB designed and developed Tx800 for mounting on mobile or stationary units. Rugged design, intense screen brightness, and exceptional reliability make Tx800 suitable for demanding environments, in which vehicl...
Page 12 - Product description; Connections and adapters; Figure 1
Product description User Manual Tx800 12 E-EQ-TX800OGWW-D-ARC 3.3 Connections and adapters 3.3.1 Interfaces and connections Figure 1 Overview connections and interfaces Connections and interfaces (port lid) Position Function 1 Power supply (12V DC 50W) 2 Mic. in 3 Audio out 4 COM2 RS232 +12V 5 COM1 ...
Page 13 - Harddrive
User Manual Tx800 Product description E-EQ-TX800OGWW-D-ARC 13 3.3.2 Under the service-lid Figure 2 Overview: connections and interfaces under the service-lid Position Function 1 USB 2.0 2 Harddrive 3 Compact Flash slot (behind HD cable) 4 Battery/UPS 5 Mini PCI slot 6 PC Card slot (option) 3.4 Tx800...
Page 14 - Peripheral Section
Product description User Manual Tx800 14 E-EQ-TX800OGWW-D-ARC 3.4.1 Peripherals and accessories Listed below are some of the peripherals which can be connected to the Tx800. The Section column lists the sections in this manual describing how to install the peripheral. For information on use, refer t...
Page 15 - Installation; Mounting the unit
E-EQ-TX800OGWW-D-ARC 15 4 Installation Before mounting the Tx800, write down the license key for the operating system. It’s located on the chassis, under the port lid. 4.1 Mounting the unit Tx800 should be mounted in a way that enables the operator to easily perform tasks while in the vehicle. When ...
Page 17 - mm holes; Figure 5 Location of holes for 2.25” ball; Firmly fasten the bracket onto the mounting surface using bolts.
User Manual Tx800 Installation E-EQ-TX800OGWW-D-ARC 17 1 Check that the planned location of the computer meets ergonometric and field-of-vision requirement. 2 Ensure there is sufficient space underneath and above the Tx800 (easier to perform service/connect and disconnect cables). There should be en...
Page 18 - Electrical installation; Always exercise caution when working with electricity!; Specification external power source; Voltage; Figure 6 Power supply connector
Installation User Manual Tx800 18 E-EQ-TX800OGWW-D-ARC 4.2 Electrical installation Always exercise caution when working with electricity! 4.2.1 Connecting to power source The Tx800 comes with a four meter, four-wired power cable; brown for positive and white for negative, and 2 conductors; yellow an...
Page 19 - Installation; For installation by trained service personnel only.; How To: Connect Vehicle Electrical Connection; avoid routing the power cable in close proximity to these devices.
User Manual Tx800 Installation E-EQ-TX800OGWW-D-ARC 19 For proper and safe installation, the input power cable must be connected to a fused circuit on the vehicle. This fused circuit requires a user supplied 5 Amp maximum time delay (slow blow) high interrupting rating fuse. If the supply connection...
Page 20 - Connect the DC to DC converter to the vehicle’s electrical system.
Installation User Manual Tx800 20 E-EQ-TX800OGWW-D-ARC The input and output blocks each have two + and two – minus connectors. Either connector in the block can be used to connect the matching polarity wire. Use the looms and wire ties to secure all wiring then reattach the cover with the screws. 6....
Page 24 - Installing peripherals; Port lid
Installation User Manual Tx800 24 E-EQ-TX800OGWW-D-ARC 4.4 Installing peripherals Åkerströms Trux AB offers peripherals to enhance the use of Tx800. Peripherals, ordered with the computer, comes with pre-installed drivers. If you order them later, or from a supplier other than Åkerströms Trux AB, yo...
Page 25 - You can configure the Tx800 as follows:
User Manual Tx800 Installation E-EQ-TX800OGWW-D-ARC 25 Figure 10 Strain relieving brackets for USB and PS/2 connectors When all peripherals are connected, the cabling should be put in the openable cable protection tube, delivered with the unit (described in section 4.5). 4.4.2 Supplying power to per...
Page 26 - Connect the barcode reader to the selected port.
Installation User Manual Tx800 26 E-EQ-TX800OGWW-D-ARC 4.4.5 Serial Barcode readers Use this installation procedure for all serial bar code readers that Åkerströms Trux AB supplies for Tx800: Select the appropriate port (COM2 supplies 12V, COM1 5V) or connect it using a keyboard wedge connector. 1 C...
Page 27 - Audio Out is a standard earphone outlet, Ø 3.5 mm
User Manual Tx800 Installation E-EQ-TX800OGWW-D-ARC 27 4.4.9 Audio Out Audio Out is a standard earphone outlet, Ø 3.5 mm . 4.4.10 Mic In Mic In is a standard microphone inlet, Ø 3.5 mm . 4.4.11 Antenna Tx800 comes with two mounted antennas, used for WLAN/GPRS communication. If externally mounted ant...
Page 28 - Mounting the port lid; Figure 11 Applying the openable cable protection tube
Installation User Manual Tx800 28 E-EQ-TX800OGWW-D-ARC 4.5 Mounting the port lid Cut the provided openable cable protection tube to the appropriate length. Put the cables in one half of it and then put the other half on, according to fig. 9. Figure 11 Applying the openable cable protection tube Befo...
Page 29 - Figure 13 On/Off button; To turn on the computer:
E-EQ-TX800OGWW-D-ARC 29 5 Using the Tx800 5.1 Operating 5.1.1 Starting the computer Figure 13 On/Off button To turn on the computer: • Press the on/off button on the computer’s front left side, see Fig. 11, or: Depending on the settings in Trux Computer Manager, Tx800 also can be started by touching...
Page 30 - Using the stylus to select screen objects; To select an object on the interface, gently tap the screen:; Figure 14 Screen Brightness
Using the Tx800 User Manual Tx800 30 E-EQ-TX800OGWW-D-ARC 5.2.1 Using the stylus to select screen objects To select an object on the interface, gently tap the screen: • One time to click. • Two times in rapid succession to double-click. • Tap on the mouse symbol in the system tray, down in the right...
Page 33 - Maintenance; Cleaning the screen; Contact Åkerströms Trux AB for more information.
E-EQ-TX800OGWW-D-ARC 33 6 Maintenance 6.1 Cleaning the screen Clean the screen when necessary. Use a soft, slightly damp cloth. If required, use a cleaning solution that is intended for computer screens. Never use detergents or any other liquid not intended for this use when cleaning the screen.. 6....
Page 35 - Troubleshooting; Computer problems; DC/DC converter supplies correct voltage.
E-EQ-TX800OGWW-D-ARC 35 7 Troubleshooting Perform the following troubleshooting procedures before contacting Åkerströms Trux AB regarding problems with Tx800: 7.1 Computer problems 7.1.1 The computer will not start If nothing happens when the On/Off button is pressed, ensure that the: • Power supply...
Page 36 - Problems with peripherals; If a peripheral doesn’t work:
Troubleshooting User Manual Tx800 36 E-EQ-TX800OGWW-D-ARC 7.2 Problems with peripherals If a peripheral doesn’t work: • Check cabling/contacts and connections first. • If the peripheral needs power supply, make sure the power supply for peripherals is activated in the Trux Computer Manager. 7.2.1 Ke...
Page 37 - Appendix; I Technical Specifications
E-EQ-TX800OGWW-D-ARC 37 Appendix I Technical Specifications Processor/RAM Intel Pentium M 1,4GHz, 1024 MB DDR Intel Pentium M 1,4GHz, 512 MB DDR Intel Celeron M 1,0GHz, 1024 MB DDR Intel Celeron M 1,0GHz, 512 MB DDR Intel Celeron M 600MHz, 1024 MB DDR Intel Celeron M 600MHz, 512 MB DDR Storage 40 GB...
Page 39 - II Port Signals; Pin Signal
User Manual Tx800 Appendix E-EQ-TX800OGWW-D-ARC 39 II Port Signals PS/2 PS2Connectors Keyboard and mouse (position: 10 and 11, section 3.3) PS/2 Keyboard PS/2 Mouse Pin Signal Pin Signal 1 KBDData 1 MSData 2 Reserved 2 Reserved 3 Ground 3 Ground 4 Volt 4 Volt 5 KBDClock 5 MSClock 6 Reserved 6 Reserv...
Page 40 - Supplies 5 VDC for peripherals, activated in Trux Computer Manage
Appendix User Manual Tx800 40 E-EQ-TX800OGWW-D-ARC COM1 Serial (COM1) 9-Pin D-sub M (position: 5, section 3.3) Pin Signal Type Purpose 1 DCD RS232 Input COM1 Handshake 2 RXD RS232 Input COM1 Receive data 3 TXD RS232 Output COM1 Send data 4 DTR RS232 Output COM1 Handshake 5 GND Ground Ground 6 DSR RS...
Page 46 - III Technical Recommendations; Recovery; The recovery media can be ordered as a stand alone product.
Appendix User Manual Tx800 46 E-EQ-TX800OGWW-D-ARC III Technical Recommendations Recovery The recovery media can be ordered as a stand alone product.
Page 47 - IV Disclaimer
User Manual Tx800 Appendix E-EQ-TX800OGWW-D-ARC 47 IV Disclaimer All Åkerströms Trux AB’s software products, whether imbedded in ROMs or other hardware or delivered on CD-ROM or other media, including all related manuals and documentation (collectively “Åkerströms Software”) are proprietary to Åkers...
Page 48 - The following software is installed on a new Tx800.
Appendix User Manual Tx800 48 E-EQ-TX800OGWW-D-ARC V Tx800 Software The following software is installed on a new Tx800. Freefloat WLinq WLinq is an integration tool for auto-id solutions. Featuring communication and control to devices connected to COM-ports, physical or virtual (USB and Bluetooth). ...
Page 49 - VI Certification; This device may not cause harmful interference; Warning; authority to operate this equipment.; EMC Directive Requirements:
User Manual Tx800 Appendix E-EQ-TX800OGWW-D-ARC 49 VI Certification FCC Information: This device complies with FCC Rules, part 15. Operation is subject to the following conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that may be received,...
Page 50 - FCC part 15 Subpart B
Appendix User Manual Tx800 50 E-EQ-TX800OGWW-D-ARC The product complies with the harmonized European standards and technical specifications listed below: EN 61000-6-4:2001 EN 61000-6-2:2005 FCC part 15 Subpart B Additionally all models are CB certified and comply with the standard below. IEC 60950-1...
Page 51 - Lithium Battery Safety Statement
User Manual Tx800 Appendix E-EQ-TX800OGWW-D-ARC 51 ! Lithium Battery Safety Statement ! Caution: Lithium battery inside. Danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by battery manufacturer. (US) Attention: Contient une pile de lithium...
Page 52 - VII Warranty, Support and Service; Warranty; The Tx800 has a warranty of one year from the date of delivery; Support; Service
Appendix User Manual Tx800 52 E-EQ-TX800OGWW-D-ARC VII Warranty, Support and Service Warranty The Tx800 has a warranty of one year from the date of delivery The warranty assumes that the product was used in a way that can be considered normal and that all the requirements in this manual are met. If ...
Page 53 - VIII Environmental Care Information; Information on recycling; Circuit boards and circuits
User Manual Tx800 Appendix E-EQ-TX800OGWW-D-ARC 53 VIII Environmental Care Information Thanks to its low energy consumption, the use of Tx800 has a minimal effect on the environment. However, the computer should still be turned off or put on standby when it is not in use, to avoid the unnecessary co...
Page 54 - IX Batteries; DISCHARGED BATTERY
Appendix User Manual Tx800 54 E-EQ-TX800OGWW-D-ARC IX Batteries CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DISCHARGED BATTERY Disposal of a Li-Po battery poses a smaller threat to the environment when compared to o...
Page 55 - X Français Avertissement et emarque
User Manual Tx800 Appendix E-EQ-TX800OGWW-D-ARC 55 X Français Avertissement et emarque Le manuel n'explique pas comment installer et utiliser le système d'exploitation ou les applications. Avertissement ! Vous avertit des risques de dommages pour les individus ou les biens. Suivez toujours les instr...