LXE E-EQ-VX3XOGWW-G-ARC - Manual

Set Up A New VX3X Note: LXE recommends that installation or removal of accessories be performed on a clean, well-lit surface. Whennecessary, protect the work surface, the VX3X, and components from electrostatic discharge. While the VX3X is in a Hazardous Location DO NOT: l Connect an external power ...

Components Components Front 1. Endcap2. Display3. Programmable Key4. Beeper5. On / Off Button6. 2nd LED7. Alt LED8. Ctrl LED9. Shift LED 10. Caps LED11. Status LED12. Programmable Key E-EQ-VX3XOGWW-G-ARC [ 2  ] VX3X User Guide

Back Back 1. RAM Ball2. Power Connector3. Strain Relief Clamp E-EQ-VX3XOGWW-G-ARC [ 3  ] VX3X User Guide

Endcap Endcap 1. Left Port2. Cable Strain Relief Clamps3. Right Port4. Audio Jack or External Antenna Connector (Audio Jack shown) Endcap Options Left Port Right Port COM3 (RS-232) USB-Client (USB-C) COM3 (RS-232) COM1 (RS-232) USB-Host (USB-H) COM1 (RS-232) USB-Host (USB-H) USB-Client (USB-C) E-EQ-...

Tapping the Touchscreen with a Stylus Tapping the Touchscreen with a Stylus Note: Always use the point of the stylus for tapping or making strokes on the touchscreen. Never use an actual pen, pencil, or sharp/abrasive object to write on the touchscreen. Hold the stylus as if it were a pen or pencil....

Backlights and Indicators Backlights and Indicators Across the top of the keypad are LEDs (Light Emitting Diodes) that provide visual cues to current VX3X operation. When theLED is not illuminated, the function is inactive. LED When illuminated . . . 2nd The next keypress is a 2nd keypress. Amber wh...

Connecting Cables to the VX3X Connecting Cables to the VX3X Note: Do not connect or disconnect cables in a Hazardous location. Connect Cable- USB Host Prerequisite : An endcap with a USB Host port (labeled USB-H). USB-H Cable Assembly 1. Seat the cable end connector (connector 1) firmly over the USB...

Connecting an AC/DC Power Supply Connecting an AC/DC Power Supply Note: The LXE-approved AC Power Supply and Adapter Cable are only intended for use in a 25ºC (77ºF) maximumambient temperature environment. 1. AC Input Cable (US only)2. DC Output Cable 3. To DC Output Cable (see above)4. To VX3X In N...

Connecting Vehicle Power Connecting Vehicle Power Complete vehicle cradle mounting and power instruction is contained in the VX3X Cradle Guide. Vehicle 12-80VDC Power Connection Caution: For proper and safe installation, the input power cable must be connected to a fused circuit on the vehicle. This...

Connect Power Cable Vehicle Supply Wire Color +12 - 80VDC (DC +) Red Return (DC -) Black Vehicle Chassis (GND) White 4. Provide mechanical support for the cable by securing it to the vehicle structure at approximately one foot intervals, tak- ing care not to over tighten and pinch conductors or pene...

Connecting the Headset Cable Connecting the Headset Cable Headset 1. Connects to voice cable end of voice cable 2. Headphones 3. Microphone Connect the VX3X voice cable I/O connector to the I/O port on the VX3X. The VX3X internal microphone and speaker areautomatically disabled. Slide the voice cabl...

Adjust Headset / Microphone and Secure Cable Adjust Headset / Microphone and Secure Cable The headset consists of an earpiece, a microphone, a clothing clip and a cable. The headset attaches to the audio cable end ofthe voice cable which attaches to the VX3X.Align the audio connector and the headset...

Connecting a Tethered Scanner Connecting a Tethered Scanner Do not connect a tethered scanner cable to a USB-C or USB-H labeled endcap port. The USB ports cannot power a tetheredscanner. The tethered scanner draws power from the VX3X.The VX3X Scan buttons have no effect on tethered barcode scanners ...

Set Date and Time Zone Set Date and Time Zone Start | Settings | Control Panel | Date/Time icon Set Date, Time, Time Zone, and assign a Daylight Savings location on the VX3X after a warm boot or anytime.There is very little functional change from standard desktop PC Date/Time Properties options. Adj...

Using the Input Panel / Virtual Keyboard Using the Input Panel / Virtual Keyboard The virtual keyboard is always available when needed e.g. text entry.Tap the Keyboard icon in the Taskbar to put the virtual keyboard on the display. Place the cursor in the text entry field and, using the stylus: l Ta...

Adjust Speaker Volume Adjust Speaker Volume The speaker, also called the beeper, is located below the left scan button.Speaker volume can be adjusted to a comfortable level for the listener by using the keypad or by changing parameters in theVolume & Sounds control panel. Using the Keypad Note: ...

Touchscreen Touchscreen Calibrating the Touchscreen If the touchscreen is not responding properly to stylus taps, you may need to recalibrate the touchscreen.Recalibration involves tapping the center of a target. If you miss the center, keep the stylus on the screen, slide it over thetarget's center...

Using the AppLock Switchpad Using the AppLock Switchpad Note: The touchscreen must be enabled. Select Start | Settings | Control Panel | VX3X Options | Misc. tab to verify touchscreen status. Switchpad Menu Switchpad Icon in Taskbar A checkmark indicates applications currently active or available fo...

Connecting to Bluetooth Devices Connecting to Bluetooth Devices Prerequisites: l The system administrator has discovered and paired (using LXEZ Pairing Control Panel) Bluetooth devices for eachVX3X: one mobile Bluetooth scanner and one Bluetooth printer. l The system administrator has enabled and di...

Reboot Reboot When the Windows CE desktop is displayed or an application begins, the power up (or reboot) sequence is complete. Warm Boot Start | Run The Warm Boot function refreshes the Windows operating system without clearing RAM or deleting installed programs. User-set parameters are unchanged.T...

Regulatory Notices and Safety Information Regulatory Notices and Safety Information Class A Digital Device NOTICE This device complies with FCC Rules, part 15. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and2. This device must accept any i...

RF Notices RF Notices This device contains transmitter Module FCC ID: KDZLXE4830P RF Safety Notice (Summit Client - 4830) Caution:This portable device with its antenna complies with FCC and Industry Canada RF exposure limits set for anuncontrolled environment. This equipment has shown compliance wit...

Lithium Battery Safety Statement Lithium Battery Safety Statement Caution: Lithium battery inside. Danger of explosion if battery is incorrectly replaced. Replace only with same or equivalenttype recommended by battery manufacturer. (US)Attention: Contient une pile de lithium. Risque d’explosion dan...

Vehicle Power Supply Connection Safety Statement Vehicle Power Supply Connection Safety Statement Vehicle Power Supply Connection: If the supply connection is made directly to the battery, a 2A slow-blow fuse should beinstalled in the positive lead within 5 inches (12.7 cm.) of the battery positive ...