LXE E-EQ-MX7CHGROG-E-ARC - Manual

Installation Installation Assemble the Power Supply Assemble the AC adapter for the MX7 Battery Multi-charger before connecting it to the charger. The AC power supply for the multi-charger is shipped with the multi-charger. Contact your LXE representative if there is no AC cable. The multi-charger p...

Charging Batteries MX7A380BATT and MX7A381BATT MX7392BATT and MX7393BATT New batteries should be charged fully before first use . The life and capacity of a Lithium Ion battery pack can vary significantly depending on the discharge current and the environment in which it is used. Use the charge func...

Inserting a Battery into the Charging Pocket Inserting a Battery into the Charging Pocket Caution! It is important that battery packs are inserted into the charging pocket correctly. Inserting the battery incorrectly couldresult in damage to the battery pack or the charger. Caution! Do not “slam” th...

Interpreting the Charging Pocket LEDs Interpreting the Charging Pocket LEDs The status of the charge operation is indicated by the color of the LED for each charging pocket. RED Continuous - on any charge pocket l Continuous red means the battery pack is charging. RED FLASHING - on any charge pocket...

Interpreting the LCD Screen Interpreting the LCD Screen The charge/analyze pocket utilizes an LCD screen to display the status of the charge or analyze operation. The LCD screen islocated to the right of the single charge/analyze pocket. Additional information may be displayed including voltage, cap...

Ready Ready The Ready indicator is displayed at the end of the Charge Only process. The LCD indicates: l The charging is complete and the battery is ready for use (READY). l The battery voltage after charge (8.4V). This reading can vary between 8.3V and 8.5V. Analyze Initial Charge When a battery is...

Final Charge Final Charge The final step in the analysis process is to recharge the battery pack after it is fully discharged. The final charge requires about4.5 to 5 hours. The LCD indicates: l The battery is discharging, indicated by the word DISCHARGE on the screen. l This is the first (and only)...

Charger Cleaning, Storage and Service Charger Cleaning, Storage and Service Cleaning Unplug the charger from the power source before cleaning or removing debris from charging pockets. Use only mild detergent with a slightly damp cloth to clean the outside of the charger. Do not use solvents or flamm...

Peripheral Devices Peripheral Devices LXE hand-held and vehicle mount devices have ports for the attachment of peripheral devices. A peripheral device might be abarcode decoder, a barcode printer, a keyboard, a mouse or a monitor. If the peripheral device does not have its own power source, and is d...

Battery Cleaning, Storage and Service Battery Cleaning, Storage and Service Cleaning The battery pack should not require cleaning unless it has become heavily soiled. Old or damaged batteries should be disposedof promptly and properly. The best way to dispose of used batteries is to recycle them. Ba...

Index A Analysis Scheduling 15 Analyze 9 Assemble the Power Supply 4 B Battery Cleaning, Storage and Service 17 Battery Fault 10 battery overheating 2 Burning 2 C Cautions 2 Charge Only 8 Charge Timers 7 Cleaning the battery 17 Cleaning the Charger 13 conductive objects 2 D Dimensions 18 disassemble...