Lowrance LWX-1 - Manual
Lowrance LWX-1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – LWX-1 Installation Options; The LWX-1 can be mounted in three basic configurations:
- Page 5 – AR Mast Mount Installation; To use AR Mast Mount Installation:
- Page 8 – through deck installation.”; IM Installation; With all of the AR installation options, we recommend the IM be
- Page 9 – LWX-1 Status Indicators; LED OFF
- Page 11 – LWX-1 SIRIUS Activation; includes both weather and audio.; Signal strength, ESN and antenna status shown; FIGURE 1
- Page 12 – FIGURE 2; Your ESN is also shown on the label; It may take several minutes for the activation signal
- Page 13 – Notes
- Page 14 – NAVICO; LIMITED TWO-YEAR LOWRANCE WARRANTY
LWX-1
Satellite Weather Radio Module
Installation Instructions
988-0158-13A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 LWX-1 Installation Options The LWX-1 can be mounted in three basic configurations: AR Mast Mount (factory-installed option) 1. AR Flush Mount with cable routed through the mounting surface 2. (e.g. deck)AR Flush Mount with cable routed on top of the mounting surface 3.
3 1. AR Mast Mount Installation The LWX-1 AR is shipped in the retail box factory-configured for a mast mount. To use AR Mast Mount Installation: Loosen the four AR Bolts & Nuts (a couple of counter-clockwise 1. turns on each).The AR Mast Boot will loosen, allowing the AR Mast Mount to turn. 2. ...
6 Gently form the AR Interconnect Cable from the exit of the rubber 4. boot up and over the rear cable exit of the AR Base Replace the AR Gasket on the AR Base, over the AR Interconnect 5. Cable, and then install the AR as described in “2. AR Flush Mount through deck installation.” IM Installation W...
