Page 3 - II; FCC CLASS B NOTICE
II NOTE: This equipment has been certified and found to comply with the limits regulated by FCC, EMC and LVD. Therefore, it is designed to provide reasonable protection against interference and will not cause interference with other appliance usage. However, it is imperative that user follows this m...
Page 4 - III; CONTENTS
III CONTENTS 1 GENERAL PRECAUTIONS .................................................................................1 2 CAUTIONS AND FEATURES ..............................................................................2 2.1 FEATURES 2 2.2 CAUTIONS 3 2.3 NETVIEWER SOFTWARE INSTALLATION 3 3 SYSTEM I...
Page 5 - IV
IV 17 RECORDING TIME (IN HOURS) .......................................................................30 18 RECORDING TIME (IN GIGABYTES PER HOUR) ...........................................31 19 INSTALLING THE HDD .......................................................................................
Page 7 - MONITOR
2 CAUTIONS & FEATURES: 2.1 FEATURES MONITOR • Picture Tube: 21” Flat Color CRT • Horizontal Resolution: More than 480 Lines • Camera capable: 8 (DIN / BNC) (dual quad) • Audio inputs: 8 RCA • Alarm Inputs/Outputs: 8/1 • Slave output A/V: Video: RCA, Audio: RCA Jack • Input signal: 1 V p-p at 75 ...
Page 8 - NetViewer Software Installation Requirements; Home Edition / Windows XP
3 2.2 CAUTIONS 1 All the warnings and instructions of this manual should be followed 2 Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use water damped cloth for cleaning 3 Do not use this unit in very humid and wet places 4 Keep enough space around the unit fo...
Page 9 - CHECK YOUR PACKAGE TO MAKE SURE THAT YOU RECEIVED THE
4 3 SYSTEM INCLUDES 21” Flat Screen CRT/DVR Combo NOTE: CHECK YOUR PACKAGE TO MAKE SURE THAT YOU RECEIVED THE COMPLETE SYSTEM, INCLUDING THE COMPONENTS SHOWN ABOVE. PO WE R HDDFULL TIMER ALARM P LAY REC USB STAND -BY ALR S EVENT SEA RCH COPY PAN /TILT Q1/Q2 SEQ PIP/POP MENU VOLU ME A-SEL TALK CH8 C ...
Page 10 - Turn the Main Power Switch ON.
5 4 GETTING STARTED 1 Connect the AC Power Cord to the AC Input of the 21” Flat Screen CRT / DVR Combo and plug into an electrical outlet. Connect the cameras into the camera inputs (BNC or DIN) found on the back of the Unit. Plug one end of the Ethernet cable into the Ethernet Port of the 21” Flat ...
Page 11 - The unit will then display the video image(s) from the camera.; MAC ADDRESS
6 After the unit has completed its internal diagnostic test, the network information will be displayed (for a short period of time). (See below) The unit will then display the video image(s) from the camera. *** NETWORK INFORMATION *** MAC ADDRESS : XX XX XX XX XX XX IP ADDRESS : 192 . 168 . 001 . 1...
Page 12 - DESCRIPTION OF PARTS AND FUNCTION – FRONT PANEL; These buttons perform the following functions:
7 R E C S TO P W T M K R E C P O W E R H D DF U L L T IM E R A LA R M P L A Y R E C U S B S TA N D -B Y A L R S E V E N T S E A R C H C O P Y P A N /T IL T Q 1 /Q 2 S E Q P IP /P O P M E N U V O L U M E A -S E L T A L K C H 8 C H 7 C H 6 C H 5 C H 4 C H 3 C H 2 C H 1 R E C S T O P W T M K R E C A L ...
Page 17 - DESCRIPTION OF PARTS AND FUNCTION – BACK PANEL; IDE-SUB - This connector is used to connect an external Slave HDD (NOT
12 6 DESCRIPTION OF PARTS AND FUNCTION – BACK PANEL 1 BNC Camera Inputs - Channel 1-8 camera inputs (for cameras with BNC Video outputs) 2 6 Pin DIN Camera Inputs - Channel 1-8 Camera inputs (for cameras with 6 Pin DIN camera outputs). 3 RCA Audio inputs - Channel 1-8 Audio inputs (for cameras with ...
Page 18 - MAIN MENU CONTROL
13 7 MAIN MENU CONTROL MAIN KEY BUZZER LOSS BUZZER 6.SYSTEM ( Ⅰ ) QUAD LINE BLANK COLOR TITLE/TIME ALARM OUT DEFAULT SET 5.MOTION SET MOTION CHANNEL SENSITIVITY AREA 1.TIME/DATE SET DISPLAY TIME DATE DATE FORMAT 3.TITLE SET DISPLAY CH1 CH8 : : 4.ALARM SET ALARM CH1 CH8 : : 2. SEQUENCE SET QUAD A CH5...
Page 20 - skipped in sequencing.; SET
15 Enter the MENU screen by pressing the MENU button. Scroll through the 12 options by pressing the UP and DOWN buttons. To enter a sub-menu, press the Enter button where the highlighted scroll bar is located. To exit the Main Menu, scroll down to the Exit option and press the Enter button. NOTE: In...
Page 21 - QUAD LINE : Activates and deactivates the border line in Quad mode.
16 NOTE: Some alternative brand PIR motion sensors have a default setting of N.C (normally closed). In order to activate the alarm on such a PIR motion sensor, change the setting to N.C 7.5 MOTION SET This submenu allows you to enable / disable the Pixel-based Motion Detection function by channel an...
Page 24 - FIRMWARE UPGRADE; NEVER TURN OFF OR DISCONNECT THE POWER during this process.; lorex
19 [ONCE] - Recording will be carried out one time, according to the schedule. b) N0-N7 : Total 8 REC can be set up from N0 to N7. Each Schedule REC can control Start TIME/DATE, End TIME/DATE and REC Quality as well as REC Speed can be set up in this mode. NOTE: When SCHEDULE REC is set up, the reco...
Page 25 - NOTE: DDNS STATUS INFORMATION; Other Codes : Program Error
20 d) USER PASSWORD : Put the Password that you have set with the DDNS server. As the maximum character available with this unit will be 8 digits, the User Name should not exceeding 8 characters and your special attention required when you are setting with the DDNS server. e) ROUTER : If you are usi...
Page 26 - Plays the most recent recording.; and
21 8 PLAYBACK SEARCH The DVR/MONITOR allows you to easily find sections of recorded video using the Search feature. Press the SEARCH button to access the “PLAYBACK SEARCH SET” menu. (1) LAST RECORD: Plays the most recent recording. (2) FULL LIST: Shows a listing of all recorded video on the HDD, sor...
Page 27 - FAST REWIND AND FAST FORWARD; You can increase the speeds of Fast Forward and Rewind on the DVR.; FUNCTION
22 9 PLAYBACK OPTION When the PLAY button is pressed, one of the Playback Search menus will appear. The Playback menu that appears upon pressing PLAY depends on the Search option that was last used. For example, if the last Search option used was a Time Search, then pressing PLAY will bring up the P...
Page 28 - ZOOM; MOVE ZOOM FOCUS EXIT
23 10 PAN/TILT ZOOM The DVR/MONITOR is equipped with a built-in Pan/Tilt Zoom feature, which is only available when used in conjunction with a compatible Pan/Tilt Dome camera. The Pan/Tilt Zoom feature supports “Pelco D” protocol. To access and operate the PTZ feature, follow these instructions: 1 C...
Page 29 - CONTROL; ST; CCTV SYSTEM
24 11 REMOTE CONTROL Features of the Remote Control. For more details on specific remote control features, refer to the Monitor features KEY FUNCTION DESCRIPTION SLEEP Mode On/Off. MENU Brings up the Main Menu. 1-8 Allows user to select individual cameras FRZ 1/5 Freezes the Channel 1/5 screen FRZ 2...
Page 30 - CAMERA
25 12 CAMERA (DIN Connector) INSTALLATION Connect the camera to the CAMERA INPUT on the rear panel of the system. SG7380 PAN/TILT CAMERA (CH1 ONLY) SG7518 CAMERA ETHERNET A LA R M O U T V ID E O IN P U T C H 3 C H 1 C H 2 C H 4 C H 2 C H 4 C H 5 C H 6 C H 6 5 1 + - C H 7 C H 8 C H 8 A U D IO IN P U ...
Page 31 - BNC CAMERA; REAR
26 13 CAMERA (BNC Connection) INSTALLATION Connect the camera to the CAMERA INPUT on the rear panel of the system. BNC CAMERA +DC 12V- VIDEO AUDIO REAR A LA R M O U T V ID E O IN P U T C H 3 C H 1 C H 2 C H 4 C H 2 C H 4 C H 5 C H 6 C H 6 5 1 + - C H 7 C H 8 C H 8 A U D IO IN P U T 6 2 7 3 + - + - +...
Page 32 - MONITOR AND STANDARD VCR INSTALLATION
27 14 MONITOR AND STANDARD VCR INSTALLATION Connect the camera to the CAMERA INPUT on the rear panel of the system MONITOR VCR VIDEO INPUT VIDEO INPUT AUDIO INPUT AUDIO INPUT A LA R M O U T V ID E O IN P U T C H 3 C H 1 C H 2 C H 4 C H 2 C H 4 C H 5 C H 6 C H 6 5 1 + - C H 7 C H 8 C H 8 A U D IO IN ...
Page 33 - SENSOR
28 15 ETHERNET (NETWORK), EXTERNAL ALARM DEVICE INSTALLATION SENSOR INTERNET A LA R M O U T V ID E O IN P U T C H 3 C H 1 C H 2 C H 4 C H 2 C H 4 C H 5 C H 6 C H 6 5 1 + - C H 7 C H 8 C H 8 A U D IO IN P U T 6 2 7 3 + - + - + - W A R N IN G O U T AUDIO S L A V E O U T + - 8 4 + - + - + - M O N ITO R...
Page 34 - NETWORK IMAGE SIZE AND SPEED; IMAGE SIZE
29 16 NETWORK IMAGE SIZE AND SPEED 720 X 240 360 X 240 IMAGE SIZE IPS IMAGE SIZE IPS BASIC 16K ~ 17K 10 ~ 15 10K ~ 11K 23 ~ 28 NORMAL 19K ~ 20K 09 ~14 11K ~ 12K 23 ~28 HIGH 23K ~ 24K 09 ~ 14 14K ~ 15K 15 ~ 20 BEST 32K ~ 33K 09 ~ 14 19K ~ 20K 10 ~ 15 NOTE: The demanding volume of HDD can be different...
Page 39 - position shown above.
34 8 If you need to unlock the cabinet, turn the key counter-clockwise from the position shown above. IF YOU DO NOT LOCK THE CABINET, THE DVR/MONITORSYSTEM WILL NOT FUNCTION PROPERLY A (locked) B (u
Page 40 - SPECIFICATIONS; RCA Input port
35 20 TECHNICAL SPECIFICATIONS DVR Recording Speed : 60 Fields / Sec. HDD Capacity : 400GB (Max.) Recording Video Quality : Basic, Normal, High, Best Recording Mode: Normal recording, Alarm (Alarm, Motion) recording, Schedule recording Playback Mode : Normal play mode, FF/REW Video Display Mode : Fu...
Page 41 - 1 TROUBLESHOOTING; PROBLEM REMEDY; INSTALLING THE HDD; DVR
36 21 TROUBLESHOOTING If the system does not function properly, please check the following points. PROBLEM REMEDY Too dark or bright picture Readjust the CONTRAST or BRIGHTNESS controls Poor picture quality Clean the camera lens. Readjust the CONTRAST or BRIGHTNESS controls. Picture but no sound Adj...
Page 42 - CARE AND MAINTENANCE
37 22 CARE AND MAINTENANCE Please follow these instructions to ensure proper care and maintenance of this system Keep your monitor and camera dry. If it gets wet, wipe it dry immediately. Use and store your unit in normal temperature environment. Extreme temperatures can shorten the life of the elec...
Page 43 - It’s all on the web; V I S I T; Lorex Technology Inc.
It’s all on the web Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades w w w . l o r e x c c t v . c o m V I S I T www.lorexcctv.com Lorex Technology Inc.
