LOREX SG8840 - Manual

v General Precautions FCC CLASS B NOTICE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation....

vi Camera Features Camera Features • Turns your TV into a Video Security System • Install and Operate in less than 1 minute • Flexible - move camera from room to room • Integrated rechargeable Lithium battery powers the camera for up to 5 hours • Audio monitoring • 4 channels available for selecting...

7 Table of Contents Table of Contents Important Safeguards ............................................................................... iiiInstallation ................................................................................................. iiiService and Use ...............................

8 SG8840 Getting Started - Package Contents SG8840 Getting Started - Package Contents The SG8840 system comes with the following components: CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE. 2.4GHz Wireless Color Camera with Adjustable St...

10 SG8840 - Receiver Features SG8840 - Receiver Features The SG8840 Wireless Receiver is a device which allows you to receive data from a selection of 4 channels for optimum clear reception Channel Select Current Channel LED Antenna (back) Bracket MANUAL / AUTO Switching Antenna Socket Power Input J...

11 Camera Setup Camera Setup 1. Adjust the camera height and position using the angle adjustment thumbscrew on the base. The camera can be permanently attached to a surface using the provided screws (3 attachment screws), or it can simply be placed to stand on any flat surface. 2. Confirm that the c...

12 Wireless Receiver Setup Wireless Receiver Setup 1. Mount the WIRELESS RECEIVER on the STAND. 2. Connect the ANTENNA to the WIRELESS RECEIVER . 3. Connect the 8V power supply adapter to the Receiver, and connect to a wall outlet. NOTE : Confirm that the power supply is labelled as the ‘Receiver Po...

13 Viewing the Camera Viewing the Camera Video can be viewed immediately (with the AC Adapter connected to the Wireless Camera), however if portable use is desired, the camera Lithium Battery must be charged for 2 hours. 1. Power up the Receiver and the Camera. 2. Set the Camera to CH1 (the Wireless...

14 Troubleshooting Troubleshooting Problem: There is no displayed image or sound on the MONITOR/TV. Solution: • Does the camera have a full charge? Try connecting the Power Adaptor to the camera • Check the LED Power indicators on both the Camera and the Receiver. Try unplugging and reconnecting the...

16 Wireless Receiver Specifications - Appendix #2 Wireless Receiver Specifications - Appendix #2 * 4 available channels for optimal signal ** Maximum open space transmission range. Actual range dependent upon building materials and other obstructions in path of wireless signal. As our products are s...

It’s all on the web Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades LOREX Technology Inc. VISIT wwwlorexcctv.com www.lorexcctv.com