LOREX LW2451AC1 - Manual
LOREX LW2451AC1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
FOR MORE INFORMATION:
www.lorextechnology.com
LW2451AC1
Q S G _ E N _ R 1 P a g e 1
Contents:
Before you install the camera, carefully plan where and how it will be positioned,
and where you will route the cable that connects the camera to the power adaptor.
Avoid installing in a location which requires the wireless signal to pass through
cement, concrete and metal structures. This will reduce the transmission range.
TIP
1. Connect the Power Adaptor to the 5V Input on the back
of the camera.
2. Connect the power adapter to a power outlet.
3. Slide the power switch to the
ON
position.
Powering the Camera
Pairing the Camera
NOTE:
• Only use the included power adapter to power the camera(s).
Place the camera and video monitor 12 inches apart.
Turn on the camera first and then the video monitor.
1
Press the
Menu
button on the monitor, then select
Pairing and press the
OK
button.
2
Select an available channel, and press the
OK
button.
NOTE:
By default, the camera included with the
system is paired to channel 1.
3
You should immediately see video from the camera on
the video monitor.
Use a pen or paperclip to press the
Pair
button on
the side of the camera within 30 seconds.
4
NOTE:
•
To pair multiple cameras, repeat steps 2~4,
selecting a different channel in the pairing menu.
• You can add a maximum of four (4) wireless
cameras to the video monitor.
Camera
Power Adapter
Security Clips
SIMP LY AWARE
™
LW2451AC1
ADD-ON CAMERA
Quick Start Guide
Pair Button
Use a pen or paper clip
to press the Pair button
during the pairing process
with the video monitor.
1
2
3
3
4
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
