LOREX LW2201 - Manual

Features 6 Features ƒ Ultra Digital Wireless Technology Provides Excellent Image Quality and Clarity ƒ Interference Free, secure and private signal ƒ Up to 450 ft Wireless Transmission Range* ƒ Weather Proof Metal Camera is Great for Indoor/Outdoor Surveillance ƒ Listen in with Exceptional Sound Cla...

Table of Contents 7 Table of Contents Getting Started .............................................................................................................................................. 8 Wireless Receiver ......................................................................................

Getting Started 8 Getting Started The System comes with the following components: CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE. 1 x WIRELESS RECEIVER 2 x POWER ADAPTER (FOR RECEIVER & CAMERAS) 1 x MOUNTING SCREW KIT 2 X WIRELESS A...

Wireless Receiver 9 Wireless Receiver 1. Wireless Antenna : Connects to the back of the receiver. 2. Channel LEDs : When lit in green, indicates the active viewing mode. 3. VGA/QVGA* button : Press to switch between VGA and QVGA video resolutions; press and hold for several seconds to remove/replace...

Wireless Receiver 10 Installing the Camera To install the camera: 1. Use the included mounting screws to mount the stand to the mounting surface: • Mark the position of the screw holes on the wall. • Drill holes and insert the drywall plugs as needed. • Firmly attach the stand to the wall using the ...

Setting up the Wireless Receiver 11 Setting up the Wireless Receiver To set up the wireless receiver: 1. Screw on the antenna to the back of the receiver. 2. Connect the Yellow video cable and White audio cable (mono) to your TV, DVR, or observation system. Use the RCA/BNC Adapter (included) to conn...

Viewing Modes 12 Viewing Modes There are six different viewing modes available on the system: individual viewing of channels 1~4, Quad split-screen, and Auto-Scan. For details on Auto-Scan, see page 14. ƒ Press the Pair button repeatedly to switch between these viewing modes. PAIR Quad mode Auto-Sca...

Adding Cameras 14 Adding Cameras The System comes with a camera that has already been paired . The Pairing Function assigns each camera to a different channel on the Wireless Receiver (up to 4 Cameras), and is necessary for configuring additional cameras. By default, the camera included with the sys...

Setting Dwell Time 15 Setting Dwell Time You can set the length of time (in seconds) that the receiver displays channels while in Auto Scan. To set dwell time: 1. Make sure the Wireless Receiver and cameras are fully connected and powered on. 2. Press and hold the VGA/QVGA button and Pair button at ...

Troubleshooting 16 Troubleshooting If you have problems with your System, there is often a quick and simple solution. Please try the following: Problem Solution There is no picture from a Camera. • Check all connections to the Camera. Make sure the adapter is plugged in. • Make sure that the Cameras...

Appendix A: System Specifications 17 Appendix A: System Specifications Receiver Specifications Receiver Receiving Frequency Range 2.400GHz~2.480GHz RX Sensitivity -81dBm Demodulation GFSK Data Rate 160 Kb/s Supported Resolutions VGA (640x480) or QVGA (320x240) Power Requirement 12Vdc +/-10% Power Co...

Appendix B: About Digital Wireless Technology 18 Appendix B: About Digital Wireless Technology The Digital Wireless signal transmission type used by the Lorex LW2201 series is also known as FHSS – Frequency Hopping Spread Spectrum . This type of signal is highly resistant to deliberate jamming as it...