Page 2 - Thank You; PREFACE; Thank; CAUTION
ii OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. Thank You PREFACE Thank CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO A QUALIFIED SERVICE PERSONNEL The li...
Page 3 - Important Safeguards; Installation
iii Revision 1.0 iii Important Safeguards PREFACE Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This shee...
Page 4 - Service
iv OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. Important Safeguards PREFACE Service 13. Servicing - Do not attempt to service this video equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service...
Page 5 - General Precautions; FCC CLASS B NOTICE; NOTE
v Revision 1.0 v General Precautions PREFACE FCC CLASS B NOTICE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a re...
Page 6 - TOC; Table of Contents; Section 1; - Location and Control; Section 2; Accessing
vi OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. Table of Contents TOC Table of Contents Section 1 - Location and Control DHU500 Series - Front .................................................................... 8DHU500 Series - Back ..................................................
Page 7 - LOCATION AND CONTROL; SECTION 1
LOCATION AND CONTROL SECTION 1 DHU500 Series - Front View...................... 8DHU500 Series - Rear View .................... 10
Page 8 - DHU500 Series - Front; KLIJ
8 OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. DHU500 Series - Front SECTION 1 DHU500 Series - Front 1. POWER - Turns the DVR unit ON/OFF . 2. CDRW DRIVE - Drive bay for CD-RW Drive 3. LED POWER AND HDD LIGHTS - Indicates unit power and HDD activity 4. NUMBER / LETTER PAD • Use th...
Page 13 - REMOTE CONTROL; SECTION 2
REMOTE CONTROL SECTION 2 Remote Control ........................................ 14
Page 14 - Remote Control
14 OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. Remote Control SECTION 2 Remote Control Listed below is a quick reference for the Remote Control. For details on specific features, refer to the DHU500 Series - Front Panel features on Pages 10-11 NUMBER PAD - Control for Cameras 1-1...
Page 15 - OPERATING THE DVR; SECTION 3
OPERATING THE DVR SECTION 3 Starting the DVR - Self Test Screens .......16Starting the DVR - QUAD Display ............16Powering Off the DVR ..............................16Main Menu Control ...................................17Event Search Funstion .............................18Accessign the DVR L...
Page 16 - Starting the DVR - Self Test Screens; Starting the DVR - QUAD Display; Powering Off the DVR/Stopping Recording
16 OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. Starting the DVR - Self Test Screens SECTION 3 Starting the DVR - Self Test Screens Once the DVR has been connected and powered on, the following self-test screens will appear: NOTE : If a new HARD DRIVE is detected by the system, th...
Page 17 - Main Menu Control; IJ
Revision 1.0 17 Main Menu Control SECTION 3 Main Menu Control • Enter the MENU screen by pressing the MENU button. The System Password may be required, based on system settings. • Scroll through the 5 Main options by pressing the KL buttons. • To enter a sub-menu, navigate to the option and press th...
Page 18 - Event Search Function
18 OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. Event Search Function SECTION 3 Event Search Function The Event Search function is used to locate previously recorded events (Motion, Sensor or Manual Event recording), and to view a list of logged system events. Press the SEARCH but...
Page 19 - Calendar Search; IJK
Revision 1.0 19 Event Search Function SECTION 3 Date / Time Search Search and play previously recorded events by Date, Time and Event type. 1. EVENT : Select an event type - Alarm, Motion or All. Press the K and L buttons to highlight, and press IJ buttons to select an event type. 2. HDD: Select a H...
Page 20 - Backup Menu
20 OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. Event Search Function SECTION 3 Backup Menu A USB Memory Stick can be connected to the front panel of the DVR, and is used as a backup device or to upgrade the Firmware on the DVR. Backup to USB / CDRW 1. Insert the USB Memory Stick ...
Page 21 - Log View
Revision 1.0 21 Event Search Function SECTION 3 Log View Displays all logged system events. Navigate through events using the K and L buttons to highlight, and press the SEL key on the front of the DVR to view an event (i.e. View a previously recorded Motion Event by selectong the Motion CH listing,...
Page 22 - Internet Explorer Settings - Active X Controls
22 OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. Accessing with Web Client SECTION 3 Accessing with Web Client Once the DVR and Network have been successfully configured, a connection can be made with a Local PC (a PC within the same network as the DVR), or remotely (a PC from outs...
Page 23 - Internet Explorer Settings - Allowing Pop-Ups; Internet Explorer Settings - Installing the Active-X Controls
Revision 1.0 Accessing with Web Client SECTION 3 Internet Explorer Settings - Allowing Pop-Ups The Web based client software requires the use of Pop-Ups in Internet Explorer. Once the address has been entered into the Address bar, an alert may appear indicating that a Pop-Up window has been blocked:...
Page 24 - Client Softwa; CTION 3; Client Software; Minimum System Requirements:
24 OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. Web & Digi Client Softwa re SE CTION 3 Web & Digi Client Software Minimum System Requirements: The minimum requirements are the same for the 4, 8 and 16 channel models. • Operating System: Windows XP Home or Professional • CP...
Page 25 - Digi
Revision 1.0 25 Digi Client - Main Window SECTION 3 Digi Client - Main Window 1. Channels Window - Displays Active Cameras. Inactive cameras or unavailable channels will be displayed in blue. 2. Detail Tabs - Displays system information (Logs, Events, System Info. and Status). 3. Remote/Local Contro...
Page 26 - Channels Window
26 OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. Channels Window SECTION 3 Channels Window Displays all Active Cameras. Inactive cameras or unavailable channels will be displayed in blue. An individual camera can be loaded into full screen mode by double clicking on a selected chan...
Page 27 - Remote/Local Controls; System
Revision 1.0 27 Remote/Local Controls SECTION 3 Remote/Local Controls System 1. Playback Buttons - Controls the recording and playback of cameras at the Remote DVR. All recording takes place on the DVR, and playback is retrieved from the DVR to the local PC. 2. Recording - Pressing the REC Button st...
Page 28 - Local
28 OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. Remote/Local Controls SECTION 3 Remote/Local Controls Local 1. Playback Buttons - Controls the recording and playback of Remote cameras to the Local PC. All recording and playback takes place on the PC. 2. Recording - Pressing the RE...
Page 29 - Save Controls
Revision 1.0 29 Save Controls SECTION 3 Save Controls Saves images and recordings to the local PC. Download Save View Saved Images 1. Download - Retrieves previously recorded data from the DVR Hard Drive, and makes a local PC copy. After the Download button has been selected, a Start / End Time sele...
Page 30 - Live
30 OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. Live SECTION 3 Live Indicates whether the currently displayed images are Live or previously recorded. Disconnect Clicking on the QUIT button will exit the Web Client Software. A prompt will appear to provide the password, and a confi...
Page 31 - Display Options
Revision 1.0 31 Display Options SECTION 3 Display Options Changes the view of the currently displayed cameras (Full, 4, 8, 9 or 16 Camera Display). Connect Button Reconnects to the DVR (if the connection is lost). Clicking on the Connect button will open the Login screen to enter the Username and Pa...
Page 32 - Setup
32 OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. Setup SECTION 3 1. Display Set • Camera Definition - Assign names to all detected Cameras • Full Display Sequence Submenu - Configures the display sequence for all available cameras. Any camera set to Bypass will not be displayed in ...
Page 37 - Local Setup
Revision 1.0 37 Setup SECTION 3 4. Event Set The Event Set controls event related reporting and alerts: • Email Registration - Add email addresses for automatic event alerts. • Email Report - Configuration for Alert Reporting to email by Day, Time, and when the email should be sent (i.e. immediately...
Page 38 - Firmware Upgrade; Channel Buttons
38 OPERATORS MANUAL | Copyright © 2006 Digimerge Technologies Inc. Channel Buttons SECTION 3 Firmware Upgrade The firmware on the remote DVR unit can be updated through the web client. 1. Download the most recent firmware from the Digimerge website, and place the downloaded file in the C:\DGClient\U...
Page 39 - Limited Warranty
Limited Warranty Warranty: Subject to the exclusions and limitations below, Digimerge warrants to the initial end-user purchaser that the product will be free from defects in material and workmanship for a period of one year from the date of purchase . Effective September 1, 2006: For all purchases ...
Page 40 - It’s all on the web; VISIT
It’s all on the web Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades Digimerge Technologies Inc. VISIT www.digimerge.com www.digimerge.com
