Linear AK-21W - Manual
Linear AK-21W – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – input can be used two ways. If programmed for “door sense” the; SENSE; input is programmed for “inhibit”, the input can be wired; ALARM SHUNT; output activates when access is granted. This output can; FE ATURES
- Page 3 – SS; CAUTION; TYPICAL DOOR INSTALLATION WIRING; Figure 1. Component Locations
- Page 4 – INSTALL ATION; Opening the Keypad; After wiring the keypad; Faceplate Removal; Figure 5. Connecting the Keypad to the Mounting Plate
- Page 5 – Figure 7. Basic Door Installation; Figure 9. Using Solid State Outputs
- Page 6 – The red indicator will light after exiting Programming Mode.; Length; unique; Code; WARNING: PERFORMING THIS COMMAND WILL; Master Code
- Page 7 – PROGRAMMING OPTIONS
- Page 8 – Beep Sounds During Auxiliar y Relay; Sound; Beep Sounds During Output #3; Sound; Sound; Beep Sounds During Output #4; Sound; Sound; Keypad Lockout Count; Attempts; Minutes; Minutes; Master Reset; THE MASTER PROGRAMMING CODE IS NOW 123456.; SPECIFICATIONS; MECHANICAL; LINE AR LIMITED WARRANTY; All implied warranties, including; This Linear LLC Warranty is in lieu; FCC NOTICE
AK-21W
Weather Resistant
Digital Keyless
Entry System
(760) 438-7000
USA & Canada (800) 421-1587 & (800) 392-0123
Toll Free FAX (800) 468-1340
www.linearcorp.com
228041 A IMAGE 1
PRINTER’S INSTRUCTIONS:
INSTR,INSTL,AK-21W - LINEAR P/N: 228041 A - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 11.000” - SCALE: 1-1 - FOLDING: ALBUM-FOLD - BINDING: SADDLE-STITCH
Installation and Programming Instructions
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
CONTENTS INTRODUCTION Linear’s AK-21W is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics.Up t...
1 COMPONENT LOCATIONS WIRING DIAGRAM 228041 A IMAGE 3 RED/GREENPOWER/ACCE SS INDICATOR YELLOW"LOCKOUT"INDICATOR KEYPAD S OLID S TATE WHITE LEDDOWN LIGHT MA S TER CODE RE S ET JUMPER (JP2) TERMINALBLOCK #1(TB1) TERMINALBLOCK #2(TB2) BEEPERLEVELJUMPER (JP1) FACEPLATE BEZEL MOUNTINGPLATE 1 - AC...
2 INSTALL ATION Before installing the keypad, the unit must be partially disassembled to access the mounting plate. Opening the Keypad The keypad assembly is secured with two tamper-resistant screws. Refer to Figure 3 for disassembly details. ❑ Use the special allen wrench (supplied) to remove the t...
