Lindy RS-422/485 - Manual
Lindy RS-422/485 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 6 – Driver Support; Dimensions; Hardware; System Requirements; Operating Environment
- Page 7 – GND
- Page 11 – problems when operating under multi-drop transmission.
- Page 12 – Driver Installation; insert the driver CD in your CD/DVD ROM drive. Run the setup file:; Next; ” to continue.
- Page 13 – (3)The Software Installation Notice will appear, please click “; Continue; ”, and the system will install the driver automatically.; Finish; ” and eject the driver CD.
- Page 16 – PCI Serial Controlle
- Page 17 – click; “Next”; ” and point to the CD Driver directory to
- Page 18 – Please click “; ” to complete this installation step.
- Page 19 – Click; “Yes”; if all serial ports have been installed, otherwise click; “No”; item you have installed.
- Page 20 – Configure COM port; Right click the mouse, and select; “Properties”; you want to change them.
RS-422/485 PCI Card
User Manual English
No. 51200 (2 Port)
No. 51202 (4 Port)
No. 51204 (8 Port)
www.lindy.com
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - SECOND EDITION (Nov 2005)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4.4 Driver support Windows3.x/95/98SE/ME/NT/2000/XP/2003 Driver Support DOS, OS/2 , Linux 2.0.x / 2.2.x / 2.4.18 / 2.4.20 4.5 Dimensions 51200 120 × 80mm 51202 160 × 104mm Dimensions (W × D) (Std.Bracket:121mm) 51204 180 × 108mm 4.6 Regulatory Approvals Hardware CE, FCC Regulatory Approvals Software...
6.0 Pin Assignments & Cable Wiring The pin assignments of the DB9 and DB25 Male port are stated as below: Type Signal DB9M DB25M TxD- 1 8 TxD+ 2 3 RxD+ 3 2 RxD- 4 20 RTS- 6 6 RTS+ 7 4 CTS+ 8 5 CTS- 9 22 RS-422 GND 5 7 Type Signal DB9M DB25M Data+ 2 3 Data- 1 8 RTS- 6 6 RTS+ 7 4 CTS+ 8 5 CTS- 9...
6.1 Jumper Settings These cards feature built-in termination resistors for each serial port. You can modify the jumper settings (short the pins) to avoid impedance mismatch problems when operating under multi-drop transmission. When an electrical signal travels through two resistance junctions in a ...
