Lindy RS-422/485 - Manuals - manualsarea.com

Page 6 - Driver Support; Dimensions; Hardware; System Requirements; Operating Environment

4.4 Driver support Windows3.x/95/98SE/ME/NT/2000/XP/2003 Driver Support DOS, OS/2 , Linux 2.0.x / 2.2.x / 2.4.18 / 2.4.20 4.5 Dimensions 51200 120 × 80mm 51202 160 × 104mm Dimensions (W × D) (Std.Bracket:121mm) 51204 180 × 108mm 4.6 Regulatory Approvals Hardware CE, FCC Regulatory Approvals Software...

Page 7 - GND

6.0 Pin Assignments & Cable Wiring The pin assignments of the DB9 and DB25 Male port are stated as below: Type Signal DB9M DB25M TxD- 1 8 TxD+ 2 3 RxD+ 3 2 RxD- 4 20 RTS- 6 6 RTS+ 7 4 CTS+ 8 5 CTS- 9 22 RS-422 GND 5 7 Type Signal DB9M DB25M Data+ 2 3 Data- 1 8 RTS- 6 6 RTS+ 7 4 CTS+ 8 5 CTS- 9...

Page 11 - problems when operating under multi-drop transmission.

6.1 Jumper Settings These cards feature built-in termination resistors for each serial port. You can modify the jumper settings (short the pins) to avoid impedance mismatch problems when operating under multi-drop transmission. When an electrical signal travels through two resistance junctions in a ...

Page 12 - Driver Installation; insert the driver CD in your CD/DVD ROM drive. Run the setup file:; Next; ” to continue.

7.0 Driver Installation 7.1 Windows 2000 / XP / 2003: On booting up, the system will detect the presence of the PCI Serial card and prompt for the driver installation wizard. Please ignore this for known and insert the driver CD in your CD/DVD ROM drive. Run the setup file: : \PCI IO\win2k and xp\se...

Page 13 - (3)The Software Installation Notice will appear, please click “; Continue; ”, and the system will install the driver automatically.; Finish; ” and eject the driver CD.

(2) You can select the folder location in which the driver is installed. Click Next ” to continue. (3)The Software Installation Notice will appear, please click “ Continue Anyway ”, and the system will install the driver automatically. (4) Please click “ Finish ” and eject the driver CD. - 11 -

Page 16 - PCI Serial Controlle

7.5 Dos: Please install the driver from the CD ROM: \PCI IO\DOS\install.exe , and follow the installation steps from the CD ROM: \PCI IO\serial.pdf 7.6 Windows 95 / 98SE / ME: On booting up, Windows 95 / 98SE / ME will detect the presence of the PCI Serial card and will prompt for driver installatio...

Page 17 - click; “Next”; ” and point to the CD Driver directory to

(2) Select “Search for the best driver for your device (Recommended)” and click “Next” to continue. (3) Please select “ Specify a location ” and point to the CD Driver directory to install the driver. : \PCI IO\win9x\ - 15 -

Page 18 - Please click “; ” to complete this installation step.

(4) The system will search and install the appropriate IO driver automatically. Please click “ Next ” to continue. (5) Please click “ Finish ” to complete this installation step. Note: The “Add New Hardware Wizard” windows will display and install drivers several times until you finish setting up ea...

Page 19 - Click; “Yes”; if all serial ports have been installed, otherwise click; “No”; item you have installed.

When Windows has finished installing the driver you must check: Control Panel > System > Hardware > Device Manager >Ports[COM&LPT] It will show the additional ports: Note: 1. If you have installed PCI Serial ports in your system, you will be requested to restart your computer, when y...

Page 20 - Configure COM port; Right click the mouse, and select; “Properties”; you want to change them.

8.0 Configure COM port (1) Select the PCI Serial Port which you want to configure, for example COM3 . Right click the mouse, and select “Properties” . (2) Click “ Port Settings ”. Configure the Bits per second, Data bits, Parity, Stop bits and Flow control if you want to change them. There are thr...