Lincoln Electric K1802-1 - Manual
Lincoln Electric K1802-1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY; WARNING; CALIFORNIA PROPOSITION 65 WARNINGS
- Page 3 – ii; ELECTRIC SHOCK can kill.
- Page 4 – iii
- Page 5 – iv; PRÉCAUTIONS DE SÛRETÉ
- Page 6 – Thank You; Please Examine Carton and Equipment For Damage Immediately
- Page 7 – TABLE OF CONTENTS
- Page 8 – GENERAL DESCRIPTION
- Page 11 – MAGNUM 400 SHORT NECK (400 amperes at reduced duty cycle) 40% WITH CO
- Page 12 – INSTALLATION; CONNECTOR KIT INSTALLATION TO GUN CABLE
- Page 14 – CAUTION
- Page 15 – CONNECTION TO FEEDER
- Page 17 – OPERATION; ELECTRODES AND EQUIPMENT; AVOIDING WIRE FEEDING PROBLEMS
- Page 18 – MAINTENANCE; GUN TUBES AND NOZZLES
- Page 22 – THREAD SIZES FOR MAGNUM 300 & 400 CONSUMABLES
- Page 23 – TROUBLESHOOTING; PROBLEMS
- Page 25 – NOTES
MAGNUM 300 and 400
GMA GUN & CABLE ASSEMBLIES
OPERATOR’S MANUAL
IM381-D
October, 2005
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However,
your overall safety can be
increased by proper installation
... and thoughtful operation on
your part. DO NOT INSTALL,
OPERATE OR REPAIR THIS
EQUIPMENT WITHOUT READ-
ING THIS MANUAL AND THE
SAFETY PRECAUTIONS CON-
TAINED THROUGHOUT. And,
most importantly, think before you
act and be careful.
Models
K574 is now located in IM646
K470 K1802-1
K471 K2286-1
K541
®
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
Copyright © 2005 Lincoln Global Inc.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
FOR ENGINEpowered equipment. 1.a. Turn the engine off before troubleshooting and maintenance work unless the maintenance work requires it to be running. ____________________________________________________ 1.b. Operate engines in open, well-ventilated areas or vent the engine exhaust fumes outdoors....
ii SAFETY ii ARC RAYS can burn. 4.a. Use a shield with the proper filter and cover plates to protect your eyes from sparks andthe rays of the arc when welding or observingopen arc welding. Headshield and filter lensshould conform to ANSI Z87. I standards. 4.b. Use suitable clothing made from durable...
iii SAFETY iii FOR ELECTRICALLYpowered equipment. 8.a. Turn off input power using the disconnect switch at the fuse box before working onthe equipment. 8.b. Install equipment in accordance with the U.S. National Electrical Code, all local codes and the manufacturer’srecommendations. 8.c. Ground the ...
