Lincoln Electric K1309-20 - Manual
Lincoln Electric K1309-20 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Our most popular MIG and flux-cored welding system!; Advantage Lincoln; Typical MIG welding systems.; Note: Above systems do not include shielding gas. Sold separately.
- Page 3 – Recommended Options
- Page 4 – PRODUCT DESCRIPTION; T H E L I N C O L N E L E C T R I C C O M PA N Y
Stick TIG MIG Flux-Cored Subarc
Gouging
Processes
DC-400
Order
Advantage Lincoln
Multi-Process Switch, Remote Output Control, Deluxe
Adjustable Gas Regulator and Hose Kit, Undercarriage
Recommended General Options
LN-7, LN-7 GMA, LN-742, LN-8, LN-9, LN-9 GMA, LN-10,
DH-10, LN-15, LN-23P, LN-25, Cobramatic
®
, NA-3, NA-5,
LT-7
Recommended Wire Feeders
K1308-11 DC-400 230/460/3/60
K1308-12 DC-400 (w/Multi-Process Switch) 230/460/3/60
K1309-20 DC-400 220/380/440/3/50/60
K1309-21 DC-400 (w/Multi-Process Switch) 220/380/440/3/50/60
Accessory Kit
Recommended Stick Options
Pro-Torch™ TIG Torches, TIG Module, Docking Kit, Hand
Amptrol™, Foot Amptrol, Remote Control Adapter, Amptrol
Adapter Kit, Water Valve, TIG Control Cable Extension
Recommended TIG Options
• Large, conveniently located switch makes it easy to
change between CC (Stick/TIG/arc gouging), CV
(MIG/flux-cored) and CV Submerged Arc modes.
• Arc force control adjusts short circuit current for a
soft arc or a forceful driving arc in the CC (Stick/TIG)
mode.
• Arc control adjustment changes pinch effect of the
arc to control spatter, fluidity, and bead shape in the
MIG/Flux-Cored mode.
• Capable of stick and DC TIG welding, and air carbon
arc gouging with up to 5/16" (8mm) diameter carbon
rods.
• Solid state circuitry provides extra long life for
repetitive welding applications.
• Outstanding welding performance with a single range
full output control potentiometer.
• Analog ammeter/voltmeter are standard.
• ± 10% input line voltage compensation for maintain-
ing weld consistency.
• Low profile case allows stacking machines up to
three high to conserve floor space. (Stacking not
recommended when using undercarriage.)
www.lincolnelectric.com
E5.20 11/02
MULTI-PROCESS WELDERS
DC
CV
CC
3
PHASE
60
Hz
50
Hz
Description
This heavy-duty, industrial, three-phase multi-process power source from
Lincoln Electric scores big in MIG, flux-cored, submerged arc, stick and DC
TIG welding. It's a great choice for arc gouging too. And flexibility doesn’t
mean complicated – the DC-400 is easy to set-up and use. Changeover
between processes is as simple as turning a switch with the factory or field
installed multi-process switch. On-board ammeter and voltmeter make
monitoring of key welding parameters a snap. Inductance and arc force
controls allow the operator to efficiently refine the arc for the job at hand.
Technical Specifications
Dimensions
Product
Product
Rated Output
(1)
Input Current @
H
(2)
x W x D
Net Weight
Name
Number
Input Power
Current / Voltage / Duty Cycle
Rated Output
Output Range
in. (mm)
lbs.(kg)
DC-400
K1308-11
K1308-12
K1309-20
K1309-21
230/460/3/60
220/380/440/
3/50/60
400A/36V/100%
(450A/38V/60%)
(500A/40V/50%)
78/39A
81/47/40A
60-500A
12-42V
27.5 x 22.3 x 33.1
(698 x 566 x 840)
473
(215)
(1) NEMA Class I Rated Output / Based on a 10 min. period.
(2) Add 3.3 in. (84mm) for lift bail.
400 Amp DC Multi-Process Welding Power Source
Output
Input
(Shown with
Multi-Process
Switch option)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
For maximum welding flexibility select the DH-10 dual feeder. Weld with two different types and sizes of wirewith two different welding procedures (3) ! Description Order Number DC-400 power source K1308-11 DH-10 wire feeder K1499-3 .045 Drive Roll – solid wire KP1505-045S .035 Drive Roll – solid wi...
[3] www.lincolnelectric.com Multi-Process Switch 3-position switch allowsquick and easy change from electrode positive ornegative semiautomatic/automatic wire feed weldingto stick or air carbon arcgouging. Order K804-1. Remote Output Control Consists of a control boxwith choice of two cablelengths. ...
DC-400 (230/460/3/60) K1308-11 DC-400 (230/460/3/60) with Multi-Process Switch K1308-12 DC-400 (220/380/440/3/50/60) K1309-20 DC-400 (220/380/440/3/50/60) with Multi-Process Switch K1309-21 Recommended General Options Multi-Process Switch (standard on K1308-12 & K1309-21) K804-1 Remote Output Co...
