Lincoln Electric IM887 - Manual
Lincoln Electric IM887 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY; WARNING; CALIFORNIA PROPOSITION 65 WARNINGS; The Above For Diesel Engines
- Page 3 – ii; ELECTRIC SHOCK can kill.
- Page 4 – iii
- Page 5 – iv; PRÉCAUTIONS DE SÛRETÉ
- Page 6 – Thank YYou; Please Examine Carton and Equipment For Damage Immediately
- Page 7 – TABLE OF CONTENTS
- Page 8 – M A G N U M 2 5 0 L X - G e n e r a l I N F O R M AT I O N
- Page 9 – M A G N U M 2 5 0 L X - I N S TA L L AT I O N; CABLE ASSEMBLY 25’
- Page 10 – Spool Gun Familiarization
- Page 11 – M A G N U M 2 5 0 L X - O P E R AT I N G I N S T R U C T I O N S; Setup Procedure
- Page 12 – CORRECT
- Page 13 – CAUTION; Drive Roll Groove Selection
- Page 14 – Making A Weld; Procedure Settings
- Page 15 – ACCESSORIES
- Page 18 – ÇÃ
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
MAGNUM 250 LX
SPOOL GUN
OPERATOR’S MANUAL
IM887
July, 2006
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part.
DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT READING THIS MAN-
UAL AND THE SAFETY PRE-
CAUTIONS CONTAINED
THROUGHOUT.
And, most
importantly, think before you act
and be careful.
K2490-1
Copyright © 2006 Lincoln Global Inc.
RETURN TO MAIN MENU
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
FOR ENGINEpowered equipment. 1.a. Turn the engine off before troubleshooting and maintenance work unless the maintenance work requires it to be running. ____________________________________________________ 1.b. Operate engines in open, well-ventilated areas or vent the engine exhaust fumes outdoors....
ii SAFETY ii ARC RAYS can burn. 4.a. Use a shield with the proper filter and cover plates to protect your eyes from sparks andthe rays of the arc when welding or observingopen arc welding. Headshield and filter lensshould conform to ANSI Z87. I standards. 4.b. Use suitable clothing made from durable...
FOR ELECTRICALLYpowered equipment. 8.a. Turn off input power using the disconnect switch at the fuse box before working onthe equipment. 8.b. Install equipment in accordance with the U.S. National Electrical Code, all local codes and the manufacturer’srecommendations. 8.c. Ground the equipment in ac...
