Lincoln Electric IM10001 - Manual
Lincoln Electric IM10001 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – AUTO-DARKENING HELMET; OPERATOR’S MANUAL; TABLE OF CONTENTS
- Page 3 – ARC Rays can injure eyes and burn skin; properly, in good condition and not damaged.; FUMES AND GASES can be dangerous to your health.; from your breathing zone and general area.; WARNING; Refer to
- Page 5 – OPERATING INSTRUCTIONS; Headgear Adjustment; SPECIFICATIONS
- Page 9 – Sensitivity is set on; HELMET CARE AND MAINTENANCE
- Page 11 – WARRANTY INFORMATION
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
AUTO-DARKENING HELMET
OPERATOR’S MANUAL
IM10001
February, 2009
Copyright © Lincoln Global Inc.
TABLE OF CONTENTS
Page
SAFETY WARNINGS – READ BEFORE USING
1
HELMET INFORMATION
2
SPECIFICATIONS
3
OPERATING INSTRUCTIONS
4
CARTRIDGE OPERATIONS/FEATURES
5
SHADE GUIDE SETTINGS
6
HELMET CARE AND MAINTENANCE
7
TROUBLE SHOOTING
8
WARRANTY INFORMATION
9
REPLACEMENT PARTS
9
RETURN TO MAIN MENU
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
• Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com • World's Leader in Welding and Cutting Products • AUTO-DARKENING HELMET OPERATOR’S MANUAL IM10001 February, 2009 Copyright © ...
HELMET INFORMATION This Auto-Darkening Welding Helmet will automatically change from a lightstate (shade 3.5) to a dark state (Shade 9-13) when arc welding starts. The filter automatically returns to a light state when the arc stops.Shade control adjustments can be made while welding. Match your wel...
OPERATING INSTRUCTIONS Headgear Adjustment Head Size Adjustment: Headband tightness is adjusted by pushing in the ratchet knob and turning to adjust to desired comfort level. This knob islocated at the back of the helmet. HEAD GEAR CROWN ADJUSTMENT is made by adjusting crown strap for vertical place...
