Lincoln Electric E500 - Manual
Lincoln Electric E500 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY; WARNING; CALIFORNIA PROPOSITION 65 WARNINGS
- Page 3 – ii; ELECTRIC SHOCK can kill.
- Page 4 – iii
- Page 5 – iv; PRÉCAUTIONS DE SÛRETÉ
- Page 6 – Thank You; Please Examine Carton and Equipment For Damage Immediately
- Page 7 – TABLE OF CONTENTS
- Page 8 – INSTALLATION; LOCATION; INPUT WIRING; OUTPUT CONNECTIONS
- Page 9 – OPERATION
- Page 10 – MAINTENANCE; GENERAL MAINTENANCE
- Page 11 – TROUBLESHOOTING; CAUTION
- Page 12 – FUNCTION PROBLEMS
- Page 18 – OUTPUT VOLTAGE
- Page 19 – TOGGLE SWITCH CHECK
- Page 20 – BATTERY TEST
- Page 23 – DIAGRAMS
- Page 24 – NOTES
RED-D-ARC
E500
IM656-A
April, 2004
Red-D-Arc Spec-Built Welding Equipment
This
RED-D-ARC
welder is built to
RED-D-ARC Extreme Duty
design specifications by Lincoln Electric.
Safety Depends on You
This welder is designed and built with safety in mind.
However, your overall safety can be increased by proper installation
... and thoughtful operation on your part.
DO NOT INSTALL, OPERATE OR REPAIR THIS EQUIPMENT
WITHOUT READING THIS MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED THROUGHOUT.
And, most importantly, think before you act and be careful.
For use with machines having Code Numbers:
10649, 11042
North America’s Largest Fleet of Welding Equipment
1-800-245-3660
OPERATOR’S MANUAL
RETURN TO MAIN MENU
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
i SAFETY i FOR ENGINEpowered equipment. 1.a. Turn the engine off before troubleshooting and maintenance work unless the maintenance work requires it to be running. ____________________________________________________ 1.b. Operate engines in open, well-ventilated areas or vent the engine exhaust fume...
ii SAFETY ii ARC RAYS can burn. 4.a. Use a shield with the proper filter and cover plates to protect your eyes from sparks andthe rays of the arc when welding or observingopen arc welding. Headshield and filter lensshould conform to ANSI Z87. I standards. 4.b. Use suitable clothing made from durable...
iii SAFETY iii E500 FOR ELECTRICALLYpowered equipment. 8.a. Turn off input power using the disconnect switch at the fuse box before working onthe equipment. 8.b. Install equipment in accordance with the U.S. National Electrical Code, all local codes and the manufacturer’srecommendations. 8.c. Ground...
