Lincoln Electric DC -1000 - Manual
Lincoln Electric DC -1000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
MIG, Flux-Cored, Submerged Arc, Gouging
Idealarc
®
DC-1000
If your application requires pure welding power combined with multi-
process flexibility, then the DC-1000, with 1300 amps of smooth DC
output, is your best investment.
Designed for semiautomatic and automatic welding, the precise control
of the DC-1000 delivers superior high amperage MIG, flux-cored,
submerged arc welding and air carbon arc gouging with up to
5/8" (15.9 mm) diameter carbons.
Publication E5.50 1/06
www.lincolnelectric.com
Processes
Advantage Lincoln
• 500 amp output connections provide enhanced arc characteristics for
low amperage submerged arc and MIG welding procedures.
• Single range control for precise output control and easy operation.
• Standard analog ammeter and analog voltmeter.
• Use the mode switch to select the desired output characteristics
for the process being used–CV Submerged Arc, CV Innershield
®
,
CC Submerged Arc.
• Power start/stop push button (NVR) switches with pilot light.
• Fuse protected 115V wire feeder auxiliary power with
1000 volt-amp capacity.
• Terminal strip and output studs for remote connections and cable.
• Low profile case allows installation of the DC-1000 under a workbench
and for stacking up to 2 machines to conserve floor space.
• Removable side panels for easy access to internal parts.
• Line voltage compensation maintains weld consistency, even with line
voltage changes of ±10%.
• Electronic and thermostatic protection from current overload and
excessive temperatures.
• Internal components, including windings, rectifiers and circuit
boards, are coated to protect against the effects of moisture
and corrosion.
• Recessed front panel protects operating controls.
• Three-year warranty on parts and labor.
• Seven-year warranty on the power rectifier.
• Manufactured under a quality system certified to ISO 9001
requirements and ISO 14001 environmental standards.
MULTIPROCESS WELDERS
CV
CC
DC
60
Hz
3
PHASE
TECHNICAL SPECIFICATIONS
Dimensions
Net
Product
Product
Input
Rated Output
Input Current
Output
H x W x D
Weight
Name
Number
Power
Current/Voltage/Duty Cycle
@ Rated Output
Range
inches (mm)
lbs. (kg)
DC-1000
K1386-3
230/460/3/60
1000A / 44V / 100%
193/96.5A
16-46 V
30.7 x 22.25 x 39.0
821 (372)
150-1300A
(781 x 567 x 991)
K1387-3
220/380/440/3/50/60
193/112/96.5A
K1387-4
380/500/3/50/60
112/85A
K1387-6
415/3/50/60
102A
Output
Input
50
Hz
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
